|
|
The microswitches MP210 & derivatives are snap-action changeovers,
simple or double switching action, connection by directly overmoulded cable.
By wiring the 5 terminals in different combinations, you can obtain electrical
circuits to 3, 4 or 5 wires.
|
|
TH-Contact piezoelectric switch
Characteristics:
• piezo technology
• momentary
• sealed IP68
• with or without illumination, two colors
• solid state output
• NO
Rating: 3 to 35 VAC/VDC, 200 mA
Actuator:
• housing in different colours
Approvals: none
|
|
|
|
|
|
|
Description: Piezo film’s capabilities to generate a high voltage output under bending strain, combined with its rugged form factor, make it an ideal candidate for solid state impact switches. Rather than using a switch contact closure, the piezo film generates a pulse which is detected by electronics. Although many of the DT’s, LDT’s and FLDT’s supplied by Measurement Specialties are used for switch applications, it is sometimes convenient to have a switch with integrated electronics. The SW100 is an ideal configuration for impact detection and momentary switch applications. A direct contact force on the tip of the stainless steel cantilever beam of the SW100 induces strain on the laminated Piezo Film Sensor (PFS) element. With dynamic strain, the PFS element generates an output that activates a built-in, normally-open circuit. Once activated, the circuit resembles the closure of a contact switch, but without the inherent discontinuity that contact points exhibit because of corrosion, pitting and bouncing. Thus the SW100 provides a single digital pulse that is ideal for triggering digital circuits and signal processing. The imperviousness, elasticity and reliability of the PFS element, along with the noise rejection characteristics of the circuit, combine to provide the SW100 with features that suit applications demanding consistent, reliable performance throughout tens of millions of switching cycles. Custom options are available to fit specific customer applications. For more information on the SW100, please call one of our applications engineers.
|
|
• Ratings up to 16A, 250V ac
• Pairs of single pole changeover contacts
• Can be stacked together
• Wide choice of terminals
• Pull-cord version
• RoHS compliant
|
|
Keyswitches and authorisation keyswitches
* Mounting hole diameter 16.2 mm
* Collar type round or rectangular
* Max. 42 V / 100 mA
* Solder terminal or PCB plug-in socket
* Fixed to the front plate with threaded ring
* Design suitable for LUMOTAST FK and LUMOTAST 75 IP 40
|
|
Slide Switches
• Ratings up to 16A, 250V ac
• 2, 3, 4 and 5 positions
• 2 way, voltage selectors
• PCB and solder terminals
• Wide choice of circuits
• Wide choice of actuators
• RoHS compliant
|
|
|
|
|
|
Honeywell MICRO SWITCH™ Basic Switches
The switch is on. Our snap-action basic switch is simple, superior, durable, and irreplaceable. Globally compliant and known worldwide for their compact and lightweight design, MICRO SWITCH™ snap-action switches are designed for accurate repeatability and extended life. MICRO SWITCH™ Basic switches are designed for presence and absence detection where physical contact with an object is permissible. They also excel in applications requiring simple on-and-off actions.
The Premium families of MICRO SWITCH™ Large and Subminiature switches were designed for high-precision applications where the cost of a switch failing is high. Originally developed to support United States aircraft in World War II, advancements in packaging and operating controls have helped further expand applications over the past 75 years while maintaining enhanced accuracy and repeatability.
Our Standard families of Basic and Miniature switches include our V15 series, and are designed with the same high quality standards, but for low cost-of-failure applications — ones where the cost of replacing the switch is less than the total cost of a switch failing.
|
|
The sealed sub-miniature MP420 microswitch is a simple snap-action
changeover switch, which is connected by means of a cable directly, overmoulded into the housing.
|
|
- Connector industry PCB, solder terminal lugs or PVC cable
- Conforms to standard IP 67
- Silver or gold-plated contacts
- Wide choice of levers
- Operating temperature up to 130°C / 266 °F
|
|
saia subminiature waterproof micro-switch
Caractéristiques :
• div. chevilles de fixation
• bornes à souder
• raccordement rapide de 2,8 mm
• bornes pour CI
• div. formes de levier possibles
• étanchéité IP67
Pouvoirs de coupure : 250 V/CA, 5 A
Dimensions (mm) : 20 x 17,5 x 6,4
Organe de commande :
• poussoir
• levier plat
• levier à galet
Homologations : UL, CSA, ENEC
|
|
• Ratings up to 20A, 277V ac
• Metal & nylon lever versions
• Single and double pole
• Choice of circuits include 3 position and momentary
• Wide choice of terminals
• Range of accessories available include boots and lever guard
• RoHS compliant
|
|
Honeywell MICRO SWITCH™ Toggle Switch
Full-Scale Offering. Clean Slate Engineering. Optimal operator interface for controlling machine function to construction and agriculture equipment OEMs, in addition to aerospace, air transport, armored fighting vehicles. Our toggle switches withstand wet, dust, dirty environments and are designed for use in harsh environments. With many configurations available, our Honeywell can help you with quick customization.
-IP rating for commercial use
-Hermetic bonded sealing
-In-house machining and stamping capabilities
-Configurable components
|
|
* 10 different actuator and display components
* Two collar types
- round
- square
* Mounting hole diameter 22.3 mm
* Degree of protection: IP 65 in front of the switch panel
* Contact blocks with gold contacts, 1...42 V / 0.01 ... 100 mA
* Contact blocks with silver contacts, max. 400 V / 10 A
* Lamp socket BA9s
* Four connection types
- screw connection
- cage clamp
- quick-connect terminal
- RJ 12 connector
* AS-I contact blocks, also for EMERGENCY-STOP, safety at work
|
|
Features/Benefits:
- Low profile design saves space
- Thru-hole and surface mount models
- High pressure contact does not require tape seal for washing
- Tape and reel packaging available
- RoHS compliant
|
|
|
|
|
|
SAFETY CODED MAGNETIC SENSOR, SR series
Pizzato Elettrica extends its range of safety magnetic sensors by introducing the SR A series which distinguishes itself from the SR B series in the reduced dimensions.
Both series are devices studied to monitor protections and guards that, when linked to a safety module, can create a system up to safety category 4, according to EN 954-1. These products are composed by a magnetic field monitoring sensor, which is connected to the machine structure; and by a coded magnetic actuator, which has to be connected to the mobile guards. The sensor is manufactured to be activated only by the correct coded actuator and not through a common magnet.
Pizzato Elettrica safety sensors distinguish themselves by following main features:
- Insensitivity to dirt as totally sealed, making them especially proper to be used in the food-industry sector.
- Wide actuation zone, characteristic appreciated in the use of inaccurate protections or for protections that can change their mechanical characteristics through the time.
- Centering mark on the housing as a reference for the operating distances
- Possibility of connection in series more sensors also with mechanical switches.
- Actuation from two different directions.
- Available with cable or M8 integrated connector.
- Actuators with operating distance of 5mm or 8 mm.
The new sensor series complete the wide range of products that Pizzato Elettrica can offer in the machine safety field. For further information visit the web-site www.pizzato.com
|
|
|
|
|
|
Microswitches of MK series have been developed in order to add new features to traditional and tested microswitches of Pizzato Elettrica. These new products have been designed with shapes and fixing perfectly interchangeable with the previous ones and with various additional functions useful to extend the applicatory field.
The main innovation of this series is the tripping device evolved and modern, with qualitative features higher than solutions present on the market.
The electrical contact on new microswitch has been realized with higher reliability technology, thanks to the double and redundant shape, and has the possibility to carry out operations with positive opening.
The housing of the new microswitch provides the possibility to seat gaskets in order to seal the device against fine dusts or liquids up to IP65 degree.
Fastening terminals of conductors are more practical and allow the fixing of different diameter cables or the possibility to choice different bends of faston contacts. For high quantity it’s possible to supply the microswitch only with the contact NO or NC, in order to minimize purchase costs.
|
|
Miniature Switches
These miniature switches include the D4C miniature enclosed switch and the D4CC miniature limit switch. They are available in a wide variety of actuators and contact configurations.
|
|
Micro switch series suitable for all markets. Wide selection covers from U to Z type and is available in all sizes. Sealed type (Turquoise switch series) also available that is highly resistant to harsh environments.
Turquoise Stroke Switches
Super long stroke in micro-miniature size.
ABJ type Turquoise Switches
High seal performance sealed switch in super-miniature size (J type).
|
|
Series G
Through-Hole Mount Toggles
Download Specifications
Configure This Switch!
Through-Hole Mount Rockers
Download Specifications
Configure This Switch!
Through-Hole Mount Pushbuttons
Download Specifications
Configure This Switch!
Surface Mount Toggles
Download Specifications
Configure This Switch!
Surface Mount Pushbuttons
Download Specifications
Configure This Switch!
G Indicator
Download Specifications
Configure This Indicator!
|
|
Panasonic Electric Works' switches are RoHS compliant, and include snap action and safety interlock switches.
- Sealed switches with elastomer double molding and ultrasonic swaging technology protect against dust and water (IP67) and are ideal for harsh environments. Typical applications include construction and agricultural vehicles, lawn equipment, and automotive systems.
- Custom designs are available for all snap action switches, from injection molding to value added assembles and custom actuators.
|
|
Features/Benefits
* Multi-pole and multi-position
* Panel and PCB mounting
* Positive detent
* Value added capability
* RoHS Compliant
Typical Applications
* Small appliances
* Testing fixtures
* Safety equipment
|
|
FR01 (submini)
10mm Rotary DIP Switches
HS (standard)
Standard Size Rotary Switches
MRA (miniature)
1/2" Dia. Washable Logic Level Rotary Switches
MRB (miniature)
Logic Level Rotary Switches
MRF (miniature)
1/2" Dia. Washable Logic Level Rotary Switches
MRK (miniature)
1/2" Dia. Washable Logic Level Rotary Switches
MRT (miniature)
Power Level Rotary Switches
MRX (miniature)
Power Level Rotary Switches
MRY (miniature)
Power Level Rotary Switches
ND (ultra-mini)
8mm DIP Rotary Switches
PS (hi cap)
30A Rotary Switches
TS (standard)
6A Rotary Switches
|
|
AS (submini)
Subminiature Slide Switches CS (miniature)
Power Rated Slide Switches
FS (miniature)
High Frequency Slide Switches JS01 (submini)
Through-hole DIP Switches
JS02 (submini)
SMT Extended Actuator Slide DIP Switches JS03 (submini)
Through-hole Piano DIP Switches
JS04 (submini)
SMT Flush Actuator Slide DIP Switches MS (miniature)
Miniature Slide Switches
SM (ultra-mini)
Ultra-miniature Slide Switches SS (ultra-mini)
Through-Hole & Surface Mount Switches
|
|
Features
- 5 current ratings
- Choice of actuator styles
- 3 terminal types (optional screw terminals available - consult factory)
- 3 contact arrangements
- Long-life coil spring mechanism
- High-temperature 150°C and 200°C available on select models (consult factory)
- Includes E13, E14, E29, E30 and G13 Series.
|
|
|
|
|
|
S Series Snap Action Switches
The S Series product group expands Eaton's snap action switch portfolio to cover all major amperages and operating forces.
A wide range of sizes and options gives customers the ability to select the most appropriate switch for their specific application.
Typical applications include computers, consumer electronics, small appliances, power tools, vending machines and packaging machinery.
Ultraminiature
The SC Series offers the smallest size with ratings of 0.1A and 3A.
A choice of operating forces, terminations and lever combinations is available.
Subminiature
Slightly larger than the SC Series, the SE/SEV Series offers more options in operating force, termination, and lever style. This series also offers a 1PDT circuit and a 1PST circuit with either NO or NC terminals. The SEV version
has VDE microgap approval.
Subminiature Waterproof
The SF Series is ideal for applications where the switch is subject to submergence of water or poor environmental conditions. It has one current rating and operating force but a variety of terminations and lever
combinations. A 1PDT circuit and a 1PST circuit with either NO or NC terminals is available.
General
The SG Series is the standard size snap switch with amperages from 0.1A to 15A, and a variety of operating forces.
With VDE approval, the SGV Series has a contact distance of larger than 3mm.
Low Torque
The SJ Series is the low torque series designed to meet applications where a light actuating force is needed.
A selection of operating forces and lever combinations is available.
|
|
Features/Benefits:
- Low differential travel, high repeatability
- Long life-150,000 cycles typical
- Single and double pole circuitry
- Sealed actuator and case
Typical Applications:
- Thermostats
- Motors
- Industrial controls
|
|
|
The turquoise stroke switch ASQ is based on a completely new type of contact system. By using sliding contacts, an extremely high overtravel of 2.5mm is achieved at optimum contact force, which greatly simplifies the installation and adjustment of the turquoise stroke switch. Furthermore, the ASQ turquoise stroke switch is bounce-free and hysteresis-free. Thanks to its IP6K7 protection class, it is ideally suited for a great variety of industrial and automotive applications.
|
|
Features
- High-precision switch with high repeat accuracy
- Models available for operating temperatures up to 120°C
- Rated for currents up to 10 amp at 250VAC
- Range of auxiliary actuators available (can also be retrofitted); two mounting positions
- Variety of contact materials available to suit your application
- Mechanical life: up to 15 x 106 operations
- Wide variety of terminal types available
- Numerous approvals
|
|
Features
- Silicon-free version available
- Models available for operating temperatures up to 120°C
- Rated for currents up to 10 amp at 250VAC
- Range of auxiliary actuators available (can also be retrofitted)
- Various contact materials available, depending on application
- Mechanical life: min. 1 x 106 operations
- Wide variety of connection options
|
|
|
|
