|
|
|
|
|
|
Precision Photonics offers superior quality mirrors and coatings at a great value. We use only ion-beam-sputtered (IBS) coatings because IBS coatings are significantly more dense, durable, and rugged than conventional e-beam or ion-assisted evaporated coatings. Compared to other coatings, IBS coatings also offer lower scatter and absorption losses and fewer pin-hole defects in the coated surface. This superior film quality and uniformity results in environmentally stable optics with laser damage thresholds of >40 joules at 1064nm.
The SBB super broadband mirrors are ideal for beam-steering applications using both the fundamental laser wavelength and one or more harmonics within the same beam path. Because it is an all-dielectric design, they can handle the high laser powers of both CW and pulsed systems, without limiting the useful angle of incidence or sensitivity to varying states of polarization.
The MPM mirror has been specially designed for multi-photon applications requiring high reflectivity, broad bandwidth, low dispersion and high transmission in the visible spectrum. All our laser mirrors are ion beam sputtered; thus the coatings are dense, easy to clean and insensitive to moisture.
|
|
These laser mirrors are designed for specific wavelength laser applications where low wavefront distortion, low scattering, and high reflectivity are usually important. The reflectance is greater than 99.5% at the specified wavelength. Typically the s-polarization is greater than 99.9% and p-polarization is close to 99.5%.
Possible surface damage from higher power laser beams is minimized by careful polishing and precisely controlled coating methods.
As with the broadband mirrors, standard diameters are 1/2 inch, 3/4 inch, 1 inch and 2 inches. Other diameters are available on request. Other laser wavelengths can also be provided so please call.
|
|
|
Optida Co. design and produce various configuration laser optical components like High-Reflection Laser Mirrors. Components could be optimized for any coupling and rezonating wavelengths.
|
|
Research Electro-Optics, Inc. (REO) produces laser components with the highest performance and greatest reliability worldwide utilizing its superior optical fabrication, superpolishing, and precision thin film coating capabilities. REO manufactures high reflector mirrors, output couplers, beam steering optics, edge filters and Brewster windows which offer the best available performance in terms of scatter, absorption, spectral characteristics, stability, laser damage threshold, and plasma durability.
Features
Superpolished Substrates
Plano and Spherical Optics (1 cm to infinity radius of curvature)
Ultra Low Scatter & Absorption (as little as 1part per million)
Ultra High Laser Damage Thresholds
Ion Beam Sputtered Coatings
Mirrors with Extremely High Reflectivity (up to 99.999%)
Extremely High Ultraviolet and Plasma Durability
High Moisture and Temperature Stabilities
Applications
Lasers (244 nm - 3.39um)
Inter Cavity Optics
Frequency Reference Cavities
Optical Instrumentation
|
|
MDG mirror series was designed to meet any protection need when it is necessary to realize a perimetrical protection.
It is possible to use them with every SB4/SB2 safety barrier. Thanks to the easy installation and excellent performances, this product is extremely versatile and suites the varied applications. This mirror series was born to meet any protection need it is necessary to realize a perimetrical protection.
|
|
|
Mirrors are available in a variety of sizes and shapes. In addition to shape and dimensions, the primary factors that need to be considered when specifying a mirror are: the reflective coating, the substrate material, the flatness or surface accuracy, cosmetic surface quality.
|
|
| ... products without technical information |
| |
|
|
|
|
Give your customers the power of mobile shopping
Symbol's "shopping buddy", the CS1504 is a portable scanner that allows customers to buy your products while they're on the go.
Additional benefits:
Fits in a pocket or purse, or can be attached to a keychain
Lets shoppers scan for further information on price, availability, features, rebates, special offers or similar products
Outside the store, customers can use the device to scan embedded information in your advertisements and catalogs, create shopping lists, purchase items or link to the Web for more information.
CS 1504 Consumer Memory Scanner
Shop Anytime, Anywhere with the CS 1504
While Web access has given customers the freedom to shop anytime, the CS 1504 Consumer Memory Scanner from Symbol Technologies gives them true mobility to shop anywhere. Another breakthrough in consumer bar code scanning technology from Symbol, the CS 1504 Consumer Memory Scanner enables customers to capture bar codes on retail merchandise in order to create a shopping list, purchase an item or simply link to the Web for further content about the item of interest.
|
|
|
|
|
|
OPR3101
The rugged OPR3101 is an ergonomic yet lightweight laser scanner using Bluetooth to communicate with other devices. This wireless device scans aggressively, delivering reliability and durability in harsh, dirty or extreme conditions.
The rugged housing of the OPR3101 is sealed to IP 54 standards and holds up well in environments where water and dust resistance is required. The OPR3101 withstands multiple drops up to 2 meters onto concrete and features a trigger guard to prevent accidental scans. The ergonomic grip provides the user comfort during the day.
Wireless communication
The OPR3101 uses the widely available and reliable Bluetooth wireless communication protocol which allows the scanned data to be instantly transmitted to any Bluetooth capable device.
Storage
Scanned data is stored on-board the OPR3101 in case the Bluetooth receiver moves out of range or is temporarily unavailable. This prevents data loss as well as loss of retracing time, contributing to continuous mobile working.
|
|
OPM2000
The OPM2000 belongs to the Opticon family of omni-directional barcode laser scanners. The extremely aggressive scan engine has a reading performance of 1000 scans per second.
The OPM2000 is equipped with a built-in stand capable of 60-degree skew angles. This device provides flexibility in reading barcodes with various sizes. The lightweight and rugged body of the scanner also allows usage as a handheld type scanner. The body is sealed up to IP 54 standards and withstands drops up to 1.5 meter.
Flexible
The OPM2000 is standard equipped with Keyboard Wedge, RS232 or USB (HID) connector configurations for easy integration in any host computer system and is available in black and white.
|
|
|
|
|
|
The New DS2400N laser reader takes advantage of Datalogic’s success in 1D bar code reading,satisfying the demanding application needs of the largest manufacturers worldwide. DS2400N provides greater profi tability and productivity in the most common warehousing, shop floor and OEM applications.The DS2400N grants high reliability when reading diffi cult bar codes thanks to its self-optimizing reading performance in any condition and
using ACB™ reconstruction technology.DS2400N offers an extremely wide depth of fi eld and large reading area in a very compact and robust housing with IP65 protection.The DS2400N is equipped with a built-in ID-NET™ interface, used for
high-speed scanner interconnection.ID-NET™ allows faster and more efficient data collection without the need for an external multiplexer device. This translates into overall cost reduction and easier system wiring.X-PRESS™ is the intuitive Human Machine Interface designed to improve ease of installation and maintenance. Status and diagnostic information are clearly presented by means of a fi ve LED bar-graph,whereas the single multi-function key gives immediate access to relevant functions such as Test Mode (for bar code verifi cation), AutoLearn (for bar code self-detection) and Auto-Setup (for scanner self-adjusting). This makes any user’s work easier. The DS2400N scanner can be easily programmed through the intuitive and multi-language Genius™ SW tool. Thanks to the wizard approach and graphic add-ons, the scanner confi guration is done rapidly.
|
|
|
|
|
|
The new DS2100N laser reader takes advantage of Datalogic’s successful experience in 1D bar code reading,satisfying the demanding application needs of the largest manufacturers worldwide. DS2100N provides greater profitability and productivity in the most common warehousing, shop floor and OEM applications.
• PERFORMANCE
DS2100N grants high reliability when reading diffi cult bar codes thanks to its high performance optics and using ACB™ reconstruction technology. DS2100N
offers high immunity to ambient light through laser modulation in a very
compact and robust housing with IP65 protection. The DS2100N is equipped with the built-in ID-NET™ interface, used for high-speed scanner interconnection.
ID-NET™ allows faster and more efficientdata collection without the need for an external multiplexer device. This translates into overall cost reduction and easier system wiring.
• X-PRESS™ HMI
X-PRESS™ is the intuitive Human Machine Interface designed to improve ease of installation and maintenance. Status and diagnostic information are clearly presented by means of a fi ve LED bar-graph,whereas the single multi-function key gives immediate access to relevant functions such as Test Mode (for bar
code verifi cation), AutoLearn (for bar code self-detection) and Auto-Setup
(for scanner self-adjusting). This makes any user’s work easier.
• GENIUS™
The DS2100N scanner can be easily programmed through the intuitive and multi-language Genius™ SW tool. Thanks to the wizard approach and graphic add-ons, the scanner confi guration will be accomplished rapidly.
|
|
Omnidirectional
Laser Bar Code Reader
Outstanding Benefits:
- Highest read performance
- Largest coverage
- Lowest cost of ownership
- Fastest installation
- Easy "plug-and-play" replacement
- No maintenance
|
|
3800g General Purpose Linear Image Scanner
The 3800g is built to deliver world-class performance for a broad range of applications in retail, manufacturing, warehousing, distribution and all points in between. Featuring the ideal balance of performance, durability, ergonomics and connectivity options, the 3800g will deliver years of hassle-free service.
Class-Leading Performance - Improved depth of field, fast bar code reading and high tolerance to motion make the 3800g easy to use in a variety of applications.
Comfortable, Ergonomic Design - Increases user satisfaction and reduced fatigue for greater productivity.
Durable - Enduring construction, no moving parts to wear out, and full impact-resistant bumpers make the 3800g one of the toughest scanners on the market.
|
|
| ... products without technical information |
| |
The state-of-the-art welding process is based on the Contour Welding principle and generates the perfect appearance in terms of the welding quality. This launched process onto the welding technologies of plastics enables a welding method without any elaborate clamping device. Accordingly, the existing limitation on 2 dimensional welding process is eliminated. Consequently, the welding process can be extended to 3D-welding.
This latest LEISTER Welding Concept provides an alternative method of resolution, completely new aspects and more flexibility in design of the geometry as well while the conventional welding methods such as Ultrasonic Welding or Vibration Welding are limited to. In other words, the GLOBO - Welding opens new opportunities for high-quality and decorative automotive products such as headlights, taillights or even large parts for Textile and Packaging Industries.
|
|
|
|
|
|
YW52 Welding Head
High-power welding head in modular design
EFFICIENT
o capable for highest laser power
o can be expanded with pre, in and post process monitoring
o high-quality welding by means of high-grade optics and adaptable protective shield gas supply
o long protective window lifetime by application-specific CrossJet concepts
FLEXIBLE
o modular design
o individual, customer-specific configuration
o simple integration into existing systems
o different focal lengths for collimation and focusing
USER FRIENDLY & SAFE
o simple teaching thanks to monitoring camera
o easy optics exchange
o monitored protective window cartridge
o operating status can be monitored by PC
System types / Lasers:
o robot
o gantry systems
o customised machinery
o for all diode and solid-state lasers like Nd:YAG, disc and fibre lasers
Technical Specification:
o max. laser power: 20 kW
o focal lengths collimation: 100, 125, 150, 200 mm
o focal lengths focusing: 150 to 1000 mm
o mass: 3 to 6 kg, depending on construction
o dimensions (standard module): 74 x 74 mm (edges dimension)
|
|
System for MSG laser hybrid welding
System for GMA laser hybrid welding
For welding steel and aluminum
Integral protective window monitoring and Cross Jet
Small interfering contour
Laser welding head: YW50
Laser: Nd:YAG or Ytterbium fiber laser
Welding power supply, wire feed system: company CLOOS Schweißtechnik GmbH
Focal length collimator: 100 mm to 200 mm
Subject to change without notice
|
|
- Diodes laser
- Laser power: 60, 90 or 120W
- Surface of the focal point 1 x 1.2mm
- Precision of the wire in-feed ± 2,5%
- Diameter of the soldering wire from 0.46 - 1.6mm
- Wire alloy leaded or lead free
|
|
Laser Brazing Head YB50
Modular processing head for laser beam brazing
rugged components tested under industrial conditions
integrated protective window monitoring and Cross Jet
integrated sensor for process monitoring
can be expanded with an LPF Seam Tracking System
Laser Welding Head YW50
Process monitoring: laser power
Laser: Nd:YAG, ytterbium
Focal length collimator: 50 to 200 mm
Welding power supply, wire feed supply, torch hose pack: company CLOOS Schweißtechnik GmbH
|
|
AX-5000 Laser Glovebox Features:
- Turnkey, one-supplier solution
- Pulsed Nd:YAG welding laser 0.25-600W
- Multi-axis motion control system
- Closed-loop environment control
- CDRH, Class 1, eyesafe enclosure
- Standard, configurable and custom solutions
Based on the industry-leading AX-5000, Unitek Benchmark's laser glovebox systems offer precise control of moisture, pressure, and gas composition in the processing environment and are optimized for laser welding sensitive electronic packages such as implantable medical devices and semiconductors. Modular, configurable design ensures that we can meet any manufacturing need or budget.
|
|
| ... products without technical information |
| |
|
|