|
|
The forces which arise in industrial processes such a press-fit, punching or crimping often have implications for the quality of the final connection. Such forces can also be measured indirectly in terms of the strain occurring at the surface of the machine structure. This is often simpler than taking a direct force measurement, which requires the sensor to be built into the structure.
Kistler's new Type 9234A… strain transmitter with integral amplifier is fitted to the machine very simply by means of a single M6 screw. Thanks to its high sensitivity, accurate measurements are possible even with extremely rigid machine structures.
The robust transmitter is particularly suitable for use with presses and assembly line robots.
|
|
| For the monitoring and control of complex processes, Elabo offers its System Service for process control centres - for customers in industry, the power supply segment, traffic management, EDP and computing centres, property management and safety engineering to name but a few. The process control centres program Elabo TaCom, defined by high flexibility and ergonomic quality, is the heart of the System Service. In addition, Elabo also collaborates in the design and equipment of control centres with comprehensive consulting services. |
|
26-1700 Series: Versatile
Extremely sensitive
Ideal for both gas & liquid service
High temperature versions available
Accuracy: ±1% of relief pressure range
26-2300 Series: High Accuracy
Precise pressure control
Diaphragm sensed - highly sensitive
Crack to reseat: 2% of set pressure
Bubble-tight shutoff at all reseating pressures
26-2500 Series: High Flow
Large diaphragm for excellent sensitivity
Bubble-tight shutoff at all reseating pressures
1/2", 3/4" and 1" NPT inlet and outlet port sizes
26-2900 Series: Tracking
High Flow
Negative spring bias
Designed for BIBS application
Diaphragm sensed - highly sensitive
44-2300 Series: Economical
Hand adjustable
Diaphragm sensed
Dome loaded
Four relief pressure ranges
44-4700 Series: Sub-atmospheric
Metal to metal diaphragm assures minimum inboard/outboard leakage
Controls sub-atmospheric to positive pressures
High flow capacity
Negative spring bias |
|
44-2200 Series: General Purpose/Compact-Reducing
1/4" inlet and outlet ports
Diaphragm sensed - highly sensitive
Various trim options available
44-2600 Series: General Purpose/Large Diaphragm
Increased sensitivity, minimal droop
Repeatability: ±1/2% of outlet pressure range
Accuracy: ±1% of outlet pressure
44-2800 Series: Accurate/Positive Seal-Reducing
Mechanical link between diaphragm & main valve prevents pressure creep
Positionable captured vent bonnet
44-3400 Series: Two Stage-Reducing
Decaying inlet characteristic: .04 per 100 PSIG inlet pressure change
Various trim options available |
|
26-1100 Series: High Flow Cv=1.3 or .46 - Reducing
Diaphragm sensed - highly sensitive
Modular construction - easy service
External sensing available for improved accuracy
Balanced main valve increases seat life
26-1200 Series: High Flow Cv=3.3 - Reducing
Similar to 26-1100 with higher flow capacity
44-4200 Series: Economical
Dome loaded
Piston sensed - highly reliable
Compatible with TESCOM electronic pressure controllers |
|
20-1000 Series: Compressed Natural Gas
Balanced main valve minimizes inlet pressure fluctuations
Piston sensed – highly reliable
Water heat jacket standard
20-1200 Series: High Pressure Hydrogen
Nickel-plated aluminum
Large piston sensor
All regulators tamper-proof
20-1400 Series: High Flow / Low Pressure
Diaphragm sensed – highly sensitive
Dome load spring bias ± 2 PSIG
Captured bonnet design for safety
44-6000 Series: In-Line High Pressure
Balanced main valve design
Positive shutoff seal
Captured bonnet available
Patent pending
44-7400 Series: Pressure Reducing
Ideal for CNG dispensing applications
Several porting configurations available
Spring adjust, high outlet, high flow |
|
44-2600 Series: General Purpose/Large Diaphragm
Increased sensitivity, minimal droop
Repeatability: ±1/2% of outlet pressure range
Accuracy: ±1% of outlet pressure
44-3200 Series: High Flow/Purge
Ideal purge regulator
High pressure inlet version incorporates a balanced main valve to minimize inlet pressure fluctuation
26-1500 Series: Sensitive/Non Venting-Reducing
Compact design
Elastomeric diaphragm - highly sensitive
Dome loading available
For liquid or gas service
26-1600 Series: Sensitive/Self Venting-Reducing
Elastomeric diaphragm - highly sensitive
Controls up to 500 PSIG
Dome loading available
For liquid or gas service
Works with TESCOM motorized actuator for remote control
DH Series: Low Pressure
Diaphragm sensed - highly sensitive
Excellent repeatability
Very high flows at low pressures |
|
54-2100 Series: High Pressure-Back Pressure
Accuracy: ±1% of pressure range
Hardened metal to metal seats for heavy duty service
Eight pressure ranges up to 15,000 PSIG
54-2300 Series: High Flow/High Pressure-Back Pressure
Control pressures to 10,000 PSIG
Flow capacity: Cv = 1.6
Excellent crack to reseat ratio
Hardened metal to metal seats for heavy duty service
54-2700 Series: High Flow/Back Pressure
Flow capacity: Cv = 5.0
Choice of dome loaded, spring loaded, or air ratio device |
|
54-2000 Series: Low Flow/High Pressure-Reducing
Rugged design, high pressure service
Hardened metal to metal seats for heavy duty service
System pressures to 20,000 PSIG
Captured venting standard
54-2200 Series: Medium Flow/High Pressure-Reducing
High flow capacity: Cv = 2.0
Hardened metal to metal seats for heavy duty service
Self-venting is standard
54-2800 Series: High Flow/High Pressure-Reducing
Flow capacity: Cv = 8.0
Inlet & outlet pressures up to 5,000 PSIG
Choice of air ratio or dome loading
Hardened metal to metal seats for heavy duty service
26-2000 Series: High Pressure Reducing
Designed for both hydraulic and pneumatic service
Captured vent standard
Designed for heavy duty shock and vibration service
Choice of metal to metal or soft seat
Compatible with TESCOM Electronic Controllers |
|
12 Series: Miniature Pressure Reducing Regulator
Product of choice for state of the art OEM gas systems. 10 Ra or 5 Ra microinch surface finish. Available in VCR, tube stubs or surface mount, "C" or "W" seal. |
|
64-2600 Series: Pressure Reducing Regulator
Semiconductor grade pressure reducing regulator. Available in two inlet pressure versions, 600 psi and 3,500 psi. For low flow applications. With several outlet pressure ranges up to 500 psi. 10 or 5 Ra internal surface finish. Tube stubs or metal face seal type connections. |
|
74-3000 Series: Pressure Reducing Regulator
Semiconductor grade pressure reducing regulator. Available with inlet pressures up to 3,000 psi. For high flow applications. With several outlet pressure ranges up to 150 psi. 10 or 5 Ra internal surface finish. Tube stubs or metal face seal type connections. |
|
44-1100 Series: High Pressure-Reducing
Excellent sensitivity
Piston sensed for high cycle life
Inlet & outlet gauge ports standard
40 micron (nominal) inlet filter
Removable valve module for easy field repair
Self-venting standard
44-1300 Series: High Flow/High Pressure-Reducing
Excellent sensitivity
Self-venting
Extremely reliable
Spring, dome or air ratio loading
44-2200 Series: General Purpose/Compact-Reducing
1/4" inlet and outlet ports
Diaphragm sensed - highly sensitive
Various trim options available
44-3400 Series: General Purpose/Two Stage-Reducing
Decaying inlet characteristic: .04 per 100 PSIG inlet pressure change
Various trim options available
26-1000 Series: High Pressure-Reducing
Outlet pressure ranges are field changeable
Numerous porting options
Optional inlet pressures to 20,000 PSIG
Large handknob provides fast low-torque pressure settings
Self-venting standard
26-2000 Series: High Pressure-Reducing
Designed for both hydraulic and pneumatic service
Captured vent standard
Designed for heavy duty shock and vibration service
Choice of metal to metal or soft seat
Compatible with TESCOM Electronic Controllers |
|
PH1600 Series: Low Pressure, High Flow
FDA Title 21 & USP Class VI Materials
Flows to 250 SCFM N2
Gas and clean steam versions
Ports from 1/2" - 1 1/2" tube ends, sanitary
PH1800 Series: Low Pressure, Very High Flow
FDA Title 21 & USP Class VI Materials
Flows to 1400 SCFM N2
Gas and clean steam versions
Ports from 3/4" - 1 1/2" tube ends, sanitary
PH-2200 Series: Compact, Low Pressure, Low Flow
FDA Title 21 & USP Class VI Materials
Flows to 5 SCFM for specialty gas & clean air applications
Ports from 3/8" - 1/2" tube ends, sanitary
PH-2600 Series: Compact, Low Pressure, Low Flow
FDA Title 21 & USP Class VI Materials
Flows to 10 SCFM for specialty gas & clean air applications
Ports from 3/8" - 1/2" tube ends, sanitary
PH-3200 Series: Compact, Low Pressure, Medium Flow
FDA Title 21 & USP Class VI Material
Gas and clean steam versions
Tracking version for agitator seals
Gas flows to 50 SCFM N2 |
|
SJS Series: Tracking/Pump Applications
Maintains accurate differential pressure when incorporated into a double seal system
Tracks upsets in system pressure and decreases downtime by increasing seal life
42 MW: Welded Diaphragm Instrument Isolator
Isolated and protects the regulator from corrosive process media
Intended for use with our wide range of tracking regulators
Assists in the control of pressure in fugitive emission and/or mechanical seals applications
44-4000 Series: High Flow Cv=2.0 or .7/Positive Bias-Reducing
Captured self-venting standard
Adjustable bias pressures
Compatible with TESCOM electronic pressure controllers
26-2900 Series: Negative Bias-Back Pressure
High Flow
Negative spring bias
Designed for BIBS application
Diaphragm sensed - highly sensitive |
|
High tech and sturdy air operated valve, with a floating
plug seal, meeting stringent use criteria.
An extra thick body of the actuator and of the valve, ensuring a good resistance to mechanical and thermal distorsions.
A modular design enabling the following configurations:
Shut off valve DCX3 L
DCX3 T
DCX3 X
Divert valve DCX4 L/L
DCX4 T/L
DCX4 L/T
DCX4 L/X
PFA seals quality ensures a complete sealing at high temperature and a good resistance to aggressive products.
Plastomer seal can be replaced by elastomer seal
Single or double acting connection
With plastomer seal, vertical setting up (especially for DCX4)
Dimensions 1” - 1-1/2” - 2” - 2-1/2” - 3” - 4” - 5” - 6” Material
Body: 316L stainless steel
Shut-off unit: 316L stainless steel
Manual or automatic operating devices: 304 stainless steel
Plug seal: PFA and elastomer
Stem seal: viton, EPDM, silicone
Options
• Signal back equipment on the top of the actuator
• Sterilization of the stem through an upper guide bearing
• External = 47 RA max (150 grit)
• Internal = 32 RA max (180 grit)
Upgraded finishes upon request:
Surface Finish
Variants
Plug and body machined for a metal to metal sealing (without seal)
Elastomer sealing (specific plug with viton, EPDM o-ring)
Manual operator device (instead of the actuator
Tank bottom type
Long stroke valve available upon request |
|
V-Port Ball Valves (VPB)
Product Description
Major Markets: Paper, Chemical, Power, Petro-chem and Gas
Design Features: The V-Port Ball Valve is a quarter-turn v-orifice ball valve for accurate throttling control of fibrous suspension applications plus clean, dirty viscous, and corrosives liquids and gases. It is designed to meet the highest industry standards for dynamic performance. Flanged or flangeless designs meet ANSI or ISA face-to-face dimensions. Design features include blow-out proof shaft protection, high flow capacity, splined ball-to-shaft connection for ease of maintenance and zero backlash. Seat options include flexible metal, rigid metal and PTFE seats.
Size Range: 1 - 20" (25 - 500mm)
Temperature Range: to 575°F (300°C)
ANSI Class Rating: 150, 300
Pressure Rating: to 285 - 740 psi (1965 - 5100 kPa)
ANSI B16.104 Shutoff Class: Flexible Metal, ANSI Class IV* Reinforce PTFE, ANSI Class VI Rigid Metal, ANSI Class IV
*Shutoff is up to 500 times better than ANSI Class IV
Body Materials: Carbon steel, 316 and 317 stainless steel, Hastelloy C
Valve Style: V-Port ball, flanged or flangeless
|
|
| Globe- and angle-style valves for high-pressure steam, hydrocarbon, or general service, including cavitating liquids or noisy gases and vapors. Temperatures to 537ºC and pressures to PN160 (Class 2500) and sizes from DN25 through DN100 DIN and 1 through 20 inches ANSI. ENVIRO-SEAL® and HIGH-SEAL packing systems to help ensure compliance with environmental emissions requirements. FIELDVUE® digital valve controllers. |
|
74-3000 Series: Pressure Reducing Regulator
Semiconductor grade pressure reducing regulator. Available with inlet pressures up to 3,000 psi. For high flow applications. With several outlet pressure ranges up to 150 psi. 10 or 5 Ra internal surface finish. Tube stubs or metal face seal type connections. |
|
DV Series: Vacuum Pressure Control
Elastomeric diaphragm - highly sensitive
Highly accurate: ±1%
Dome loaded option
Choice of constant or no bleed
44-4700 Series: Absolute-Back Pressure
High Flow capacity
Negative spring bias
Controls sub-atmospheric to positive pressures |
|
| The Series 1025 Foot and Palm Switches are industrial-rated switches suited to applications where an operator must have both hands free to perform other functions or, where a highly visible switch is required for quick and easy operation. All of our switches are available in a wide choice of contact arrangements, ratings and enclosure styles. Industrial duty 4 way 5 port air valves are available for air control circuits. |
|
The contactless measurement and the lack of moving parts, allow a precise determination of the mass flow without any wear to the systems components. This outstanding advantage is applicable on various mechanical conveying systems like:
belt conveyors
screw conveyors
troughed chain conveyors
steel plate conveyors
bucket conveyors
free fall in chutes or pipes
This makes a radiometric bulk flow measuring system particularly interesting for various applications.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
