|
|
Parimix is specialised in powdery and liquid products mixing.
The continuous mixer is specially conceived to offer solutions for a regular and sustained production (flows up to 40 m3/h) or a less important production but requiring a constant or high quality mixing.
The discontinuous mixer (turbo mixer) offers solutions for multiple formulations, varied recipes, low or important outputs.
|
|
Feature
1) The mixing barrel and blades are made of stainless steel, always keeping clean and away from dirt. The mixing barrel can be tilted freely at the angle of 0X~360X degrees for discharging and cleaning purpose.
2) The safety device can protect the safety of operator and machine. The automatic stopping device can be set with in the range of 0-60 minutes for automatic stopping.
Application
Foodstuff, General chemicals, Feed, Plastic, Dye, Cosmetics, Drugs, Plastic powder, Resin powder addition...etc.
|
|
Planetary mixers with speed variation
Robust, the line of planetary blenders BV, favors power, ease of use and hygiene. The power of mixture, served by a smooth and precise variation through a potentiometer, allows all cooking and baking planning. A novel system involving a removable grid and an assisted bowl adjustment increases maneuverability. The ergonomics is remarkable and the stainless steel environment facilitates the maintenance.
Painted steel chassis, ABS cover
Stainless steel bowl and security grid + 3 tools (whip, paddle, spiral)
Speed variation control by potentiometer
Stainless steel satellite cover
Stainless steel plates on bowl suspension
Digital timer
Progressive startup of the tool
Functioning safety bowl and grid
|
|
DOSO: Volumetric blender
ACCURATE METERING
DOSO is used for preparation of thermoplastic granule mixes in extrusion processes.
EASY TO INSTALL
Designed so that it can easily be installed directly on the load hopper of the process machine, or on a platform, or on a floor-mounted storage hopper to feed one or more machines.
FAST INGREDIENT CHANGE, FAST AND THOROUGH CLEANING
- Practical and easy access to all the components.
- Load hoppers with sight glass to visually check the level.
- Manual gate valve which allows inspecting the metering screw without having to empty the hopper.
- Unloading hatch for fast and easy emptying of the hopper
- Metering screws easily accessible without the use of tools for fast and thorough cleaning.
MODELS
DOSO is available in 9 models: 2, 3 or 4 ingredients for throughputs up to 300, 600 and 1000 kg/h.
|
|
VORTEX %u2013 HIGH SHEAR MIXERS FOR WET GRANULATION
The Vortex high shear mixers are designed to perform wet granulation processes, combining active products and excipients by adding a binder solution.
MAIN CHARACTERISTICS
- Granulation process is carried out very quickly thanks to the high energy transmitted to the product by the turbulence caused by the combined action of impeller and chopper blades.
- The impeller has a special design to reduce product sticking to the blades, and can be easily removed for cleaning.
- The product bowl is completely separated from the mechanical area by means of special seals with inbuilt pneumatic cleaning system.
- Machine lid prearranged for automatic product loading, binder or solvent addition, installation of washing nozzles, internal light and inspection window.
- The machine can be supplied through the wall or on a working platform and can be integrated with a fluid bed dryer for a complete granulation line.
|
|
|
When muscles are needed it is time for CONDOR PPP STAR type mixers a machine tremendously strong and powerful to solve the very dificult problems with the highest viscosity.
|
|
The CONDOR planetary vacuum mixers PPPR type offers a complete and wide answers to the mixing needs of sealants, glue putty and adhesives manufacturers.
The planetary action allows a quick mixing of components the mechanical four speed gear box supplies the right answer to any viscosity change of the product while mixing.
The high reliability of the structure and mechanics make it possible to proceed whit continuous, heavy duty works without frequent maintenance operations.
The working position is with the bowl near the ground: perfect to control the mixture while mixing.
The vacuum facilities, complete and autonomous, make it possible to deareate the product during the process.
On request we are able to supply Exx electrics for products in hazardous areas.
We are experienced for silicon butyl, acryl sealants, vinilic glues marble and putty, ...
|
|
When only one planetary mixer is not enough or is better to use two different mixing tools at same time now the right answer is CONDORMIX GEMELLI available in three different sizes: 150 (100 litres working), 200 (150 litres working), 250 (200 litres working).
CONDORMIX GEMELLI: the privilege of more actions at same time.
|
|
To test new products, for research and development laboratories, for small productions.
The simplest and cheapest machine totally made of stainless steel for best hygiene.
Very easy to be operated.
Detachable bowl by previous mixing tool detachments.
Variable speed by means of mechanical motoreducer choice of different mixing tools.
|
|
Planetary mixers
A great versatility associated with a very high level of performance make of VMI industrial planetary mixers particularly suitable equipment for operations of foaming, emulsion, creaming, gritting and whipping. All the know-how process of VMI is concentrated in these column or bridge mixers which allow, among other things, to work in vacuum or under pressure conditions, the dosing and the introduction of components, the under pressure emptying, the heating/cooling and the on-site cleaning.
|
|
JOGINDRA Heating Cooling Mixers have the proven record of being the best in performance and are highly acclaimed in the Plastic Industry. The mixers are used in processing of dry blend in the area of Rigid and Plasticized PVC, thermoplastics, ABS, PE, PP for drying Blending & Wet Coating, Ceramics, Dyes and Colours, Pharmaceuticals and other allied industries.
It is a combination of High Speed Mixer and Cooling Mixer. The material in high speed mixer during mixing operation is heated by utilization of frictional heat and then transferred to the cooling mixer in order to always keep it in free flowing conditions, suitable for storage, transport and subsequent process.
|
|
The wide range of Parimix IMR type continuous mixers, uses the exclusive principle of central injection of dry or liquid products into the mixing chamber.
This principle ensures a perfect control over the point where the products meet and therefore a unique quality of distribution.
Thanks to this principle, the volume of the mixing chamber is very low, whatever the flow.
It results in low power consumption and minimum space requirement of these mixers compared to the standard industrial units.
The materials used for manufacturing these mixers are selected according to the products mixed (abrasive, fragile, corrosive, plugging, etc.).
Parimix features a wide range of robust and compact mixers for flows ranging from 50 kg/h to 30 t/h.
|
|
|
JOGINDRA Container Mixer is specially designed for cold mixing process for all polymer powders or granules with colorants and or additives for concentrated master batches. The mixer is in two parts i.e. Mixer and Storage Hopper. Initially the mixing head is facing to ground and is in a position for lifting and clamping to Container and finally rotate to 180º for mixing. The cleaning time is reduced to a minimum. The mixing bowl is made of stainless steel with lockable system and gasket to prevent leakage during operation. The mixer ensures gentle product treatment and has shorter mixing times. PLC can be supplied on request.
|
|
Parimix is specialised in powdery and liquid products mixing.
The continuous mixer is specially conceived to offer solutions for a regular and sustained production (flows up to 40 m3/h) or a less important production but requiring a constant or high quality mixing.
The discontinuous mixer (turbo mixer) offers solutions for multiple formulations, varied recipes, low or important outputs.
|
|
|
|
|
|
The first choice for demanding unit operations
- Solid-Liquid mixing
- Deagglomeration
- Micro-dispersing
- Dissolving
- Homogenizing
- Paste production
Applications: Mixing pastes, breaking down agglomerates dissolving, dispersing, emulsifying and homogenizing viscous materials, such as primers, paints and printing inks, pigmented coating compounds, plastic pastes, ointments, creams photographic emulsions, adhesive and resin solutions, etc.
System Advantages: Outstanding dispersing performance and uniform fineness through intensive shearing action of the new rotor-stator impeller, featuring a patented external pinned ring rotor. Almost vertical flow of the circulating materials effects rapid entry of fine powdery constituents into the batch. Drastically reduced mixing times. Minimum heating of the batch. Low energy consumption. Simplified operation and processing. Simple servicing and maintenance. Central control panel with indicators for all machine functions. Automatic central positioning of change can.
The newly developed Drais Disperser ideally combines the proverbial Drais sturdiness and longevity with innovative process technology and control features. In three machine sizes drive powers of 11 to 132 kW are supplied for vessels of 150 to 6000 liters. The speed variation by electronic frequency inverter control is included as standard feature even in the basic equipment.
|
|
|
The CDS dispersion system enables the dispersion process to be carried out in single walled containers in a closed system under vacuum. The single walled containers are placed into the container receptacle and secured in place. If the dispersion process needs to be cooled a double walled container receptacle is available. After the liquid and powder components have been added, the glass cover can be lowered into place onto the container receptacle over the vacuum shaft guide tube. The actual dispersion process can now be carried out and the product set into a turbulence free rolling motion. If vacuum is required the vacuum pump can be switched on. The impeller height can easily be raised or lowered during the dispersion process even under vacuum. The dispersion process can clearly be observed through the large glass cover.
|
|
MIXERS
- VERTICAL FOR GRANULES -
Type AT60
Vertical mixers made with steel, easy to clean and to operate.
|
|
Horizontal mixer MH1000 with MH7000
Mixer with double hollow whorls with step opposite for the mixture of powders and aggregates
INDUSTRIAL materials of crushing, mixes, handling, storage, proportioning, sifting and bagging
|
|
Continuous feeding- and mixing system convince by its economic operation and highest mixing homogeneity! GCM(Gericke Continuous Mixer) has many references in the food industry, construction chemical and plastic industry. Recently the demand for the Pharmaceutical execution is increasing, as continuous processes are gaining more attention in the Pharma processes.
The mixer can economically handle without premix up to 12 components. Limiations are set by the number of loss-in-weight feeders and their investment.
the mixer can handle liquids as well. It is used e.g. for the production of cereal bars.
Gericke has supplied recently a GCM to add vitamines into milk powder.
|
|
Features:
· two- through seven-component configurations
· interchangeable augers and sleeves
· easy clean out
· unique combining adapter ensures complete dispersion without mechanical agitation.
|
|
BLENDCON
Continuous Blender Series 705
The Series 705 Blendcon 12-port high capacity continuous blender is completely air operated with spring return pistons and single port supply connection. It is fabricated of all 304 stainless steel construction and finished to a #4 finish for product contact surfaces and all glass bead blasted exterior.
|
|
BLENDCON™
Air Blender
Series 379
Blends large batches
The Blendcon air blender is one of the fastest, most efficient blenders available for mixing large batches of dry bulk materials. It can typically blend a 300 cubic foot batch in just four minutes and can handle batches up to 200 tons in capacity.
By producing large, consistent, homogeneous batches, the Blendcon air blender simplifies material handling and quality control, and increases productivity.
Fast, homogeneous blending
The Blendcon air blender uses compressed air to lift, turn and tumble dry materials, utilizing the high kinetic energy released when compressed air is allowed to expand rapidly to atmospheric pressure. Compressed air is pulsed into the material in an upward circular pattern. This blending method is so effective that very few pulses are required to complete the blending cycle.
Blending is fast and thorough. The ratio of horsepower to material blended is very low, resulting in high efficiency.
|
|
|
Today more than ever, product quality is critically important if a plant is to succeed in economic terms. The quality of plastics, however, in particular is not constant due to fluctuations in the production process, this makes homogenization necessary. To meet this need, Coperion Waeschle offers two devices which handle this important task both before and after compounding: the Combi-Flow® Blender for pellet homogenization and the Fluid-Cone Blender for powder homogenization - two extremely efficient gravity blenders which are also ideally suited to admixing of additives
|
|
|
|
|
|
GRAVIMAX - GRAVIMETRIC DOSING
The Ultimate in Precision Blending
All Materials Metered by Weight
* Accuracy is constantly monitored
* Automatic compensation for material variations
Advanced Dispense Technology
Color and additive is held within 0.1% of requested ratio
Very Simple Operation
The user-friendly multi-task control is menu driven providing:
* Percent preset - ingredient values entered in %
* Display operating conditions
* Materials identification data base
* Recipe Storage
* Preset batch count
* Reports
* Maximum Mixer Discharge - full size slide gate on larger models eliminates dead zones, providing efficient discharge of each completed mixed batch im the mix chamber
Immune to Vibration
* Load cell readings that have been compromised by machine shock or vibration are detected and disregarded
* Blenders may be mounted directly on the process machine
Fast clean-out feature reduces downtime
* Removable and hinged safety doors with quick release latches
* Easy removable scale hopper for access to mixing chamber
* Removable mixer agitator and stainless steel liner for efficient cleaning
Unique metering pinch valves
Fast, efficient, reliable and effective, the pinch valve together with the exclusive software meters materials precisely from batch to batch
|
|
Application
Foodstuff, Feed, Dye, Pigment, Chemical, Spice, Fertilizer...etc.
Feature
1) The inner and outer layers dual-spiral "S" sign crossing of upper and lower mixing type is adopted. Mixing effectiveness is good. Speed is fast. Powder dust will not fly in operation.
2) Complete and through blending of raw materials by ribbon agitator
which create two layers and counter movement of flows.
|
|
|
|
|
|
Vertical Blenders are an excellent design alternative for applications that are shear sensitive or where space on the plant floor is at a minimum.
The gentle blending action of the slow turning blending screw is far gentler than that of a horizontal blender. The blending screw orbits the conical vessel wall while it turns and gently lifts material upward. The materials are then thrust at the upper most batch level towards the center of the vessel, and then move slowly back down the center, while mixing with materials being moved upward by the orbiting screw.
When compared to horizontal blenders this design has several advantages:
1. Gentle blending action is ideal for friable or shear sensitive materials.
2. One blender can be used for a wide range of batch sizes, ranging from as small as 10% of the rated capacity.
3. Nearly 100% of the blended materials are discharged through the bottom valve after completion of the blend cycle.
4. Use nearly 50% less power per unit being blended.
5. Less floor-space and are ideally suited to multi-story facilities.
|
|
|
|
|
|
Universal mixer KUM SYSTEM Papenmeier
Top quality mixing
Minimum mixing times
Gentle product treatment
Virtually heat-free processing
Maximum accessibility inside the machine
Low maintenance mixer concept
Machine Type
Constitutes a vertical mixing system, whereby maximum mixing efficiency is combined with low generation of energy and minimum increase in temperature. The mixer is designed for easy cleaning. Free access inside the mixing area, easy removal of the mixing impeller and a swivelling discharge construction promote quick and effective cleaning. This ensures practical, costeffective application in all fields of mixing technology.
Standard Configuration
A three-arm mixing element rotates close to the wall and with minimum clearance from the bottom of a vertical, cylindrical mixing container. The special shape of this element and its peripheral speed are coordinated in such a way that the mixing product is circulated as a vortex and thereby accelerated horizontally and vertically. This mode of product movement assures rapid, intensive mixing, even in the case of components with widely varied particle shapes and sizes, bulk densities and surface condition. High mixing precision is obtained within minimum time. If necessary, a separately driven chopper disperses lumps, distributes liquid uniformly and promotes wet granulation.
|
|
The wide range of Parimix IMR type continuous mixers, uses the exclusive principle of central injection of dry or liquid products into the mixing chamber.
This principle ensures a perfect control over the point where the products meet and therefore a unique quality of distribution.
Thanks to this principle, the volume of the mixing chamber is very low, whatever the flow.
It results in low power consumption and minimum space requirement of these mixers compared to the standard industrial units.
The materials used for manufacturing these mixers are selected according to the products mixed (abrasive, fragile, corrosive, plugging, etc.).
Parimix features a wide range of robust and compact mixers for flows ranging from 50 kg/h to 30 t/h.
|
|
Continuous mixing systems
For large scale production rates (from a few hundred liters per hour, up to several tens of thousands of liters per hour), continuous mixing is undeniably an interesting alternative to the processes of batch mixing. VMI Rayneri offers continuous mixers consisting of multiple mixing stages depending on required quality of the mixture and the number of ingredients to incorporate.
EHL consisting of one or more rotors/stators permits carrying out emulsions or smoothing operations.
Gyroflux ensures all the mixing operations (dispersion at high speed, dilution etc…)
|
|
|
JOGINDRA High Speed Mixers have the unique distinction of being the best in performance. Their field of application are extensive and include the following industries : PLASTIC (Rigid, Plasticized PVC Dry Blends), CERAMICS, CHEMICALS, DYES and COLOURS, FOOD STUFFS, PHARMACEUTICALS etc. The mixing container is made of stainless steel. It's interior has industrial mirror finish. It is jacketed for additional heating or cooling by means of heat transfer oil, steam or water as required. By utilization of frictional heat the material may be sintered, agglomerated, dried, vented, sightly gelled, or hot coloured.
|
|
|
|
