|
|
| General Purpose - HM Series Supermill - Designed primarily for discrete pass operation with medium to large grinding media size. This series is available in chamber sizes from 0.75 to 200 liters, with a capacity range from about 1.0 GPH to 900 GPH on average. The most economical mill selection offered by Premier, but has a limited range of applications related to the size of the grinding media required for processing. The HM Series can operate well over a wide viscosity range, and is generally used in 1 or 2 pass grinding applications with media size of 0.8mm or larger. There are various options to the HM including stationary front screen, and various materials of construction including plastics, ceramics and composites to suit particular applications. Standard type milling discs, or patented AP type high energy milling discs can be used to optimize mill performance. The basic HM design with Internal Rotating Screen has proven to be a "WORKHORSE" in general purpose media milling applications for over a quarter century |
|
The Premier Submersible Basket Type Media Mill is an exceptionally versatile dispersion system specifically engineered to allow batch and tank size flexibility.
• Independently controlled mixers and milling shaft provide:
-Uniform particle size.
-Consistent temperature control.
-Better flow control.
-Minimal operator interface.
• Capable of particle size reduction in a range of slurry applications.
• Easy clean-up. |
|
The rotor-stator gap can be adjusted on-the-fly by turning a hand wheel
Changing the gap setting allows the user to modify the shear rate applied to the fluid and achieve the desired process results
Indicator dial defines gap-setting position and ensures process repeatability
This machine is designed to handle a wide range of applications and empowers the user to make simple adjustments to achieve the precise product qualities they require
Vertical or horizontal mounting position makes mill ideal for batch, batch-continuous or in-line applications |
|
Continuous feeding- and mixing system convince by its economic operation and highest mixing homogeneity! GCM(Gericke Continuous Mixer) has many references in the food industry, construction chemical and plastic industry. Recently the demand for the Pharmaceutical execution is increasing, as continuous processes are gaining more attention in the Pharma processes.
The mixer can economically handle without premix up to 12 components. Limiations are set by the number of loss-in-weight feeders and their investment.
the mixer can handle liquids as well. It is used e.g. for the production of cereal bars.
Gericke has supplied recently a GCM to add vitamines into milk powder. |
|
Metalfab's rugged CB1 Mixer/Blender is designed and engineered to continuously mix, blend, and convey two or more powders, pellets, flakes or granular materials dispensed from Metalfab MetaTech™ Volumetric or "etter-Weigh®"Gravimetric eeders in proportional quantities. Available in models from 150 to 500 cu. ft./hr., the CB1 takes the materials and continuously mixes, lends, and conveys them at a rate equal to the total rates etered by the feeders.
Features/Benefits
Rugged, Flexible Design provides long life and versatility to ccommodate multiple Volumetric or Gravimetric Feeders.
Easily Integrated with other Metalfab upstream and ownstream equipment such as Better-Weigh® controllers, in activators, bulk bag unloaders, Convey-All™ conveyors, osibins™, and hoppers to form a complete materials handling ystem or subsystem
High Performance Trouble-Free Operation for nmatched dependability with continuous, nonstop productivity
Built to Last in a choice of high quality carbon steel, carbon teel with special coatings, 304 or 316 stainless, and other pecified materials
Standard AC Constant Speed Drive with other drives vailable upon request
Optional Sanitary Design with SS Contacts allows lexibility to meet a wide range of applications |
|
| Admix, a leader in high and low shear sanitary mixing and powder induction since 1989, introduces a new concept for specifying, updating or replacing conventional liquid-processors. The Admix LiquiShear will incorporate most dry solids or powders into liquids for blending, dispersing, de-agglomerating, reconstituting and reworking in 3 to 5 minutes. The basic blending module is heavier duty, higher quality and more powerful than conventional liqui-processors...utilizing a low maintenance double mechanical seal, a removable manway dump grid, a combination filter and vent, and a CIP spray ball. |
|
| Today more than ever, product quality is critically important if a plant is to succeed in economic terms. The quality of plastics, however, in particular is not constant due to fluctuations in the production process, this makes homogenization necessary. To meet this need, Coperion Waeschle offers two devices which handle this important task both before and after compounding: the Combi-Flow® Blender for pellet homogenization and the Fluid-Cone Blender for powder homogenization - two extremely efficient gravity blenders which are also ideally suited to admixing of additives |
|
The Perfect Blend
At Enraf we define our blending applications as the continuos combining of two or more products, to a pre-determined specification, during a standard flow process. That process could be a ship feed to storage tank process, an aircraft re-fuelling process, a load rack to road tanker filing process or a myriad of alternative operations. Blending is differentiated from 'Injection' by its continuos feed of blend components, and generally by higher ratio requirements defined as 'Percentages', as opposed to 'Parts Per Million'. Applications in this field include, but are not limited to:
Ethanol Bio Fuel Blending
Diesel Bio Fuel Blending
Fuel Oil Blending
Mid Grade Fuel Blending
Chemical Blending
Fertiliser Blending |
|
The wide range of Parimix IMR type continuous mixers, uses the exclusive principle of central injection of dry or liquid products into the mixing chamber.
This principle ensures a perfect control over the point where the products meet and therefore a unique quality of distribution.
Thanks to this principle, the volume of the mixing chamber is very low, whatever the flow.
It results in low power consumption and minimum space requirement of these mixers compared to the standard industrial units.
The materials used for manufacturing these mixers are selected according to the products mixed (abrasive, fragile, corrosive, plugging, etc.).
Parimix features a wide range of robust and compact mixers for flows ranging from 50 kg/h to 30 t/h. |
|
Premier's workhorse for the lab, widely used for the processing of small batches in the lab or pilot plant. With mechanical speed drive and 1.5 or 2.0 HP explosion proof motor, this unit has the power to satisfy a wide range of applications where mixing problems exist. The 2500HV breaks up agglomerates and reduces particle size. Increase your mixing efficiency with Premier's line of interchangeable mixing heads.
• Hi-Vis Head
• Simplex Head
• Duplex Head
• Rotor/Stator Head
Heads are also interchangeable with Premier's Model 2005 Lab Dispersator Mixer. |
|
| ... products without technical information |
| |
For quarrying and in-pit crushing applications, Metso Minerals offers a wide range of proven products. With the Lokotrack mobile crushing plants, you can build a fully mobile and independent mobile process with two, three or even four different crushing and screenins stages.
The proven Lokotrack series features an extensive range of track-mounted crushing plants designed for quarrying and in-pit crushing applications. The plants are built around robust, high capacity crushers, feeders and screens, enabling them to process practically any rock or ore.
Replacing the conventional dump truck fleet with a Lokotrack LT series primary crushing plant followed by a belt conveying system, or with a complete mobile in-pit crushing plant, brings significant savings in production costs. It also significantly reduces the load on the environment.
The LT Series crushing plants can operate close to the face, so the excavator or wheel loader operator can control the complete crushing operation. This reduces both costs and the workload.
For aggregate production, the LT Series can comprise two or three stage crushing plants. For in-pit and mining applications, the Lokotrack LT range is complemented by Nordberg LL Series conveyors and MAF (mobile apron feeder) products. |
|
| Designed with the operator in mind, the crusher offers the most up-to-date technological advancement to assist with your crushing needs. |
|
Features:
- Cutterwheel is equiped with FERMEX teeth
- Very solid construction
Advantages:
- Easy to operate
- Easy to transport
- Long lifetime
Benefits:
- 30 % more productivity
Additionally to the well known piling machines Vermeer MT also supplies auxiliary equipment. Examples are the Easy Cutter (pipe cutting system), drop weights (750 - 4000 kg class,with or without connections),
tubes (114 up to 508 mm) and swaging units.
Swaging units expand tubes in such a way that the original
tube size fits into the swaged end giving the connection a
high quality after welding it.
It also saves labour against other coupling methods like connection rings.
The TU-series Vermeer MT swaging units can be supplied as Standard
and as a Wide Range model.
Both systems are suitable for swaging pipes that are regularly used in the foundation industries. |
|
Features:
- Cutterwheel is hydraulicly driven
- Cutterwheel is equiped with FERMEX teeth
- Optimal balance between motor, pump, hydraulic motor
and cutterwheel
Advantages:
- Easy to use
- Solid construction
- Highest periphirical speed
Benefits:
- up to 70% more productivity
- 20% less cost
FERMEX, manufactured by Vermeer MT, has 6 standard models of stump cutters.
It is possible to chose from hydraulicaly or mechanicaly driven machines, and machines which use the P.T.O. of a tractor or it's own power unit.
FERMEX stump cutters are designed and built for the professional user.
The machines are robust, have few wear parts and are making a high production.
The applied teeth/ pockets system results in quick mounting because
no gauges are required.
The locking of the teeth combined with the pockets lead to safe usage.
The Vermeer MT teeth are provided with tungsten carabide plates that extend the lifetime. |
|
Mobile Crushers : BR580JG-1
The newly designed Komatsu BR580JG-1 mobile crusher looks simple, and it's very powerful. This newly developed crusher offers you an amazing crushing capacity of 140 - 460 ton/h.
High-performance jaw
The KCJ4430 large-capacity jaw crusher offers the greatest treatment capacity in its class, plus easy maintenance. In addition, Komatsu's original bear lock cylinder mechanism allows you to change the discharge clearance with a simple one-touch adjustment, and it also facilitates the removal of clogged foreign material from the discharge side.
Outstanding mobility
Hydraulic steering and high-travel speed makes it easy to relocate the machine. The BR580JG-1 uses the same track undercarriage as those used on Komatsu's hydraulic excavators.
Large-capacity hopper
The 2.625 mm × 4.400 mm hopper is accessible for material loading from three sides.
ECOT3
Komatsu's SAA6D125E-5 engine with high pressure common rail injection provides 257 kW (345 HP) @ 1.900 rpm for superior crushing power. The engine meets EU Stage IIIA and EPA Tier III emissions regulations. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
