|
|
The mixer/heat-exchanger CSE-XR was developed and patented by Fluitec AG. It is the most important invention in the static mixing technology of the last 20 years.
The CSE-XR is mainly used for temperature conditioning of highly viscous liquids at laminar flow. A strongly defined and well controlled homogeneity is guaranteed in any situation as well, as a very narrow residence time distribution. The reason for this excellent performance is its geometry, which is consequently based on the geometry of the most efficient static mixer type, the CES-X.
The very high radial mixing efficiency constantly ensures an intensive flow against the internal heat transferring tubes, thus allowing a
the compact design of this device.
Multitube heat exchangers are often not dedicated for scale-ups. Problems occur mainly in cooling processes at laminar flow conditions, when the product can "freeze" in particular tubes, due to its increased viscosity at lower temperatures. Uncontrolled residence time distribution and maldistribution are thereby leading to a bad process control.
Monotube heat exchangers (tubes with a double shell) can be built much smaller, if using static mixers. The mixing elements are improving the surface renewal rate significantly.
|
|
Ruffneck™ FR Heat Exchanger Unit Heaters are extra heavy duty (including heavy gauge steel construction) to meet the most demanding service and long life requirements for rugged industrial applications. The FR Series heaters are specifically designed for steam applications that may be subject to freezing conditions, and are of particular value for outdoor applications such as drilling rigs. They gain their resistance to frost damage through the use of rectangular top and bottom headers. Explosion-proof models suitable for hazardous locations available on custom order.
Ruffneck™ HP Heat Exchanger Unit Heaters are extra heavy duty (including heavy gauge steel construction) to meet the most demanding service and long life requirements for rugged industrial applications. The HP Series heaters are suitable for a wide range of heating fluids including steam, hot water, glycol, oil, etc. for both space heating and liquid cooling applications. Explosion-proof models suitable for hazardous locations available on custom order. For more information on the HP Series, visit http://www.ccithermal.com/products-ruffneck.php?product=hp |
|
BOILERS WITH SERPENTINE HEAT EXCHANGERS
Boilers get heating energy from solar collector or central heating system and produce potable hot water. Fluid in the serpentines provides heat transfer water to water via transferring its heat energy to water in inner tank. Thus potable hot water will be produced.
Cylinder type hot water tank and serpentines in the tanks is coated with immersing to hot galvanize. Thus anode rod is not needed and you save your time and cost for changing anode rod. Due to special coating material heat transfer is faster and heating efficient is high.
You can observe water temperature with thermometer. You can set desired temperature with adjustable thermostats mounted to sensor holes. When water temperature has achieved desired temperature, thermostat will send a signal then circulation and recirculation pumps will be out off service. Thus it will prevent waste operation.
DCSB and DTSB series boilers are available for additional heating elements. Thus, especially in summer periods you can provide hot water with electrical supply without using central heating system. If you use DCSB-X and DTSB_X Series model with electrical command panel ask for temperature pressure valve which provides discharging excess water/steam pressure and temperature. |
|
DTSYB Boilers With Thermal Heat Exchangers
DTSYB and DTSYB-X Series is a single serpentine boiler that prepares hot water by the circulation of Thermal Red Hot Oil or Steam through its serpentine. The serpentine material in this Series is selected accordingly to the fluid, since the fluid to be circulated is oil based or steam. In X series it has an electrical command panel too. It produces hot water by the circulation of Thermal Red Hot Oil/ Steam or by the use of electric energy.
Floor Standing Type
Installation Way; Vertical
Avaliable to connect thermal line(red hot oil, steam, water)
Avaliable to Connect Solar Panel, Central Heating System, Central Heater Tank
Economically, High Efficient
200 - 2000 Liters Capacity Range
Bimetal Thermometer
Pressure Relief P Valve
Temperature Sensor Connection Hole
(Avaliable For Re-Circulation And Closed Line Pump Control)
Glass Wool / Polyurethane (Cfc Free) Insulation
Electrostatic Epoxy Coated Main Body
Drain Tap
Smart Apperance
2 Years Whole Warranty
10 Years Supplying Spare Parts Warranty
Optional Features
Avaliable Additional Heating Elements
Available Additional Electrical Command Panel
Temperature and Pressure T&P Valve |
|
Perfect resistance.
Orobica Plast-Gom is highly experienced in elastomer technology and specialized in the production of gaskets for plate heat exchangers. Its technical division works alongside customers and designs different types of gaskets to satisfy the market, based on a simple drawing or an existing sample. All the departments are equipped with technological machinery and highly qualified staff, who first make the moulds and then the gaskets, which are vulcanized by compression or injection technology. The company is capable of making gaskets of any material, shape or size and for any type of heat exchanger. The gaskets are mounted using glue or clips. Orobica Plast-Gom also collaborates with world-renowned research labs to improve existing mixtures as well as study and test new specific elastomers. This means that it can guarantee more efficient, durable and reliable gaskets even when used in heavy-duty industrial applications, therefore cutting maintenance time and running costs.
|
|
|
|
