|
|
| General Purpose - HM Series Supermill - Designed primarily for discrete pass operation with medium to large grinding media size. This series is available in chamber sizes from 0.75 to 200 liters, with a capacity range from about 1.0 GPH to 900 GPH on average. The most economical mill selection offered by Premier, but has a limited range of applications related to the size of the grinding media required for processing. The HM Series can operate well over a wide viscosity range, and is generally used in 1 or 2 pass grinding applications with media size of 0.8mm or larger. There are various options to the HM including stationary front screen, and various materials of construction including plastics, ceramics and composites to suit particular applications. Standard type milling discs, or patented AP type high energy milling discs can be used to optimize mill performance. The basic HM design with Internal Rotating Screen has proven to be a "WORKHORSE" in general purpose media milling applications for over a quarter century |
|
The Premier Submersible Basket Type Media Mill is an exceptionally versatile dispersion system specifically engineered to allow batch and tank size flexibility.
• Independently controlled mixers and milling shaft provide:
-Uniform particle size.
-Consistent temperature control.
-Better flow control.
-Minimal operator interface.
• Capable of particle size reduction in a range of slurry applications.
• Easy clean-up. |
|
The rotor-stator gap can be adjusted on-the-fly by turning a hand wheel
Changing the gap setting allows the user to modify the shear rate applied to the fluid and achieve the desired process results
Indicator dial defines gap-setting position and ensures process repeatability
This machine is designed to handle a wide range of applications and empowers the user to make simple adjustments to achieve the precise product qualities they require
Vertical or horizontal mounting position makes mill ideal for batch, batch-continuous or in-line applications |
|
Premier's workhorse for the lab, widely used for the processing of small batches in the lab or pilot plant. With mechanical speed drive and 1.5 or 2.0 HP explosion proof motor, this unit has the power to satisfy a wide range of applications where mixing problems exist. The 2500HV breaks up agglomerates and reduces particle size. Increase your mixing efficiency with Premier's line of interchangeable mixing heads.
• Hi-Vis Head
• Simplex Head
• Duplex Head
• Rotor/Stator Head
Heads are also interchangeable with Premier's Model 2005 Lab Dispersator Mixer. |
|
| ... products without technical information |
| |
GO-FER III PLASMA KIT
The GO-FER III Plasma Kit is specifically designed to work in conjunction with a plasma machine. It's travel speed of 8-100 inches per minute (203-2640mm/min) and it's direct rack and pinion drive makes it ideal as an all position portable cutting machine for a plasma torch. The torch holder will accept any standard 1-3/8" (35mm) diameter machine torch that has a 32 pitch gear rack. A built in trigger contactor for initiating the cut makes the GO-FER a convenient self contained package.
|
|
The latest generation of welding equipment can be programmed with specific process preferences of your individual choice or for the actual welding processes. Based on a solid state power source, it weighs just 1/80 of the 70 year old ancestors but has more power. Our different plasma cutting equipment enables you to quickly and accurately cut all types of metals
|
|
| Manual plasma cutting units for applications in trade and industry are suitable for straight, profile, template, countur and bevel cutting in all positions, for hole piercing as well for plasma gouging, hole and slot cutting. |
|
RTC 60 to 150
Universal applicability for steel, special steel, aluminium non-ferrous metals and other electrically conducting metals - even with painted surfaces
Optimum cutting quality thanks to
- precisely regulated and continuously adjustable cutting current
- high performance reserves - even at the critical end of the cut
- exact control with voltage compensation
Maximum economic efficiency from high cutting speed at the same time as long service life and optimum cutting quality
Dependable ignition using REHM Zetronik is possible both for contact and distant cutting - for hose bundle lengths up to 20 m
Long service life thanks to shutdown of the controlled pilot current during cutting, soft start function, and micro-controlled cutting current with patented transistor module
Maximum safety for man and equipment thanks to monitoring of torches and wearing parts, with active early warning and automatic safety shutdown.
|
|
ALL THE ADVANTAGES OF THE CHOPPER ON SECONDARY FOR PLASMA CUTTING
x High power in smaller space and light weight
x Linear current regulation allows easy adjustment of the parameters necessary for perfect cutting : current and cutting speed
x Electric consumption divided by 2.5
x Due to the current raise during the welding transfer, thermal overloads can be avoided, thus granting an important economy of spare parts
TECHNICAL CHARACTERISTICS
x ELEKTROCOUP 60 TR
Mains : three phase 230V or 400V 50/60 Hz
Power consumption (at 60%) : 7.5 kVA
Off load voltage : 300V
Cutting current : 20-60 A
Maximum quality cutting : 20 mm
Maximum separation cutting : 25 mm
Weight : 65 kg
x ELEKTROCOUP 100 TR
Mains : three phase 230V or 400V 50/60 Hz
Power consumption (at 60%) : 12 kVA
Off load voltage : 300V
Cutting current : 20-90 A
Maximum quality cutting : 30 mm
Maximum separation cutting : 35 mm
Weight : 75 kg |
|
High-definition plasma cutting system SPARK.
The Spark 2040 plasma cutting system is the epitome of the latest process technologies on this type of machining. Various innovative features (with patent pending) place it at the top of the range in terms of performance , quality of cut , easiness of use and operating economy.
Last but not least the onboard CNC makes use even simpler with regard to the more sophisticated nesting , automatic programming and off-line control systems. |
|
Tecnoplasma 52
Selco%u2019s new low-cost plasma cutting generator using electro-mechanical technology, has an innovative, modern design.
It can perform good quality cuts up to 15 mm carbon steel.
As it does not consume much electrical power and compressed air, this tool is ideal for cutting conductive materials on-site and in the workshop.
It is more versatile, simpler, quicker and more practical to use than traditional mechanical tools and oxyacetylene welding torches.
The pilot arc is accurately struck thanks to the high frequency device, and is always present while the torch button is pressed, enabling you to cut grilles and work pieces of complex shapes. If used off its nominal parameter range, a thermal safety device protects internal parts against malfunctions.
Two alarms are also provided, one to cut off the output voltage when the torch is not completely assembled and the other to prevent operation with incorrect compressed air pressure. |
|
K1756-1 Pro-Cut 25 w/15 ft Torch 115/230/1/50/60
Industrial Price: 1596.00 (USD)
The Pro-Cut® 25 is one handy cutting tool to have around. Ideal for hobby, farm, HVAC, autobody shop or sheet metal fabrication, this professional-grade plasma cutting system lists a host of features that will make your metal cutting jobs safe, fast and easy! Weighing in at only 29.5 lbs. (13.4 kg), it generates 25 amps of cutting power capable of cutting electrically conductive materials up to 3/8" (9.5 mm) thick.
Patented Vortech™ technology torch consumables are built to deliver efficient performance and long life. Parts-in-Place™ torch safety features prevent the torch from operating when sensing parts are not in the proper position. Auto-reconnect feature properly sets up the machine when you plug into 115 volt or 230 volt input power. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
