|
|
|
|
|
|
- Wire rope systems -
For light energy supply systems with 1 to 3 cables. For applications which do not allow the installation of C-rails. Suitable for indoor and outdoor use.
- C-rail systems -
As energy supply system from light to heavy design. C-rail systems are used for very different applications: crane manufacturing, hoist units, transport systems, conservation technology, special engineering, etc.. C-rails are available in zinc-coated and stainless steel version. Special versions are available for explosion-proof areas. Suitable for indoor and outdoor use.
- Square rail systems -
Energy supply systems on square rail (diamond track) are predominately used on circular and curved tracks or in very dusty environments. These systems guarantee a perfect function even on variable levels. Our square rails are galvanized or made of stainless steel (only program 270). Special versions are available for explosion-proof areas. Suitable for indoor and outdoor use.
- I-beam systems -
Festoon-systems for I-beams carry flat and round cables for the transfer of electrical energy and data. Hoses are also carried for the directing of fluids, air or gases. Wampfler festoon systems are employed worldwide in steel mills, ports, zinc coating shops and compost preparation facilities, to name a few applications.
|
|
|
VAHLE cable carriers support power cables and hoses (for pneumatic and hydraulic applications) to mobile equipment. The carriers travel on flat flange or sloped flange I-beams. They comply with VDE and international regulations and support both flat and round cables.
|
|
Normal environment (bearings steel codes 220 or 223 bearings pressed sheet metal), wet or dusty (rollers full nylon assembled on axes stainless to add code 226).
Carts for flat cables, round pipes or mixed.
Autocentreuse sheath = reduced wear of the carts (an exclusiveness normaf).
|
|
Adjustable carts with 4 rollers. Beach of adjustment of 50 with 135mm.
Wing higher than 135mm to consult us.
Reduced set-up time, carts run directly on iron.
Body galvanized steel. With epoxy protector or out of stainless to consult us.
Carts for flat cables, rounds, pipes or mixed.
Capacity of the carts: 30 kgs (rollers nylon, axes stainless) & 60 kgs (rollers & axes galvanized steel).
Version with chain of traction to consult us.
|
|
Economic system & reliable.
Reduced exposure time.
Require only one fixing at each end.
Use: normal, corrosive or very dusty environment.
Carts for flat cables, rounds, pipes or mixed.
To envisage a safety coefficient of 4 (breaking load ÷ 4).
Capacity of the carts: 5 kgs.
|
|
|
|
|
|
The CARS, ABLE System NORMAF, conceived for the provision of energy to movable elements, offer optimum solutions for a great variety of applications, such as facilities of crane and elevators, storage in height, machines of construction, facilities of transport, etc.
Our range of provision includes:
Cars on steel cable with diameters of 6, 8 or 12mm, with a lifting capacity of 5kg. by car and until a length of 130m without intermediate supports. Cars for round cables until 40mm. of diameter and planes until 75mm. of width.
Cars for profiles until IPE 270 or IPN 360, with a lifting capacity of 15 to 60kg. Length of the system until 30m. and limitless in reinforced version.
Cars for profile C, with a lifting capacity from 100 to 400kg, speed of use to 140m/min., Length of the limitless system with possibility of the circuit formed by curves. Cars for round cables until 40mm. of diameter and planes until 400mm. of width. Option of stainless steel material.
The ABLE CARS, system FESTOON, conceived for the provision of energy to movable elements that demands the heavy industry, offering by means of its robust construction, great security on watch still in very hard works.
|
|
|
VAHLE festoon systems support conductor cables, flat or round, and hoses (for pneumatic and hydraulic applications) to mobile equipment. The cable carriers are well guided in C-tracks, on diamond tracks or I-beams.
|
|
Woodhead's Festoon Systems provide a simple, inexpensive method of handling cables and hoses, but have special space requirements which must be considered to select the proper system. The height of the system is determined by the loop depth and the required working travel. A system with a greater depth will require fewer cars and less storage than a system with a shorter loop depth.
|
|
Power feed supply for Ibeam (IPN ou IPE)
for all mowing engine, machine, cranes,
standard application for inside or outdoor
version for flat, round or hose or twice
for Ibeam section 48 to 140mm
up to 140mm please ask us specia trolleys
version with 2,3 or 4 wheels
|
|
Helix Chain is rotation application cable chain for robot or rotation movement machine and it can protect the cable from outer risk by guiding and keeping the rotation track.
HX3543
HX6075
HX6087
|
|
Chain Material - CPS Amide/ UL94B
Temperature: -40C~+130C
Coefficient of Friction: 0.02~0.07u
(Regular Cable Chain: 0.3~0.4u)
With CPS patented band connection method, you get the quietest and best application possible. Applications range from clean room environments which require a Class 10 or lower rating, to work environments requiring low noise during operation.
Gantry Robots, Robot Carriages, Cranes, Automatic Welding Lines, Gantry Cranes, Container Spreaders etc... can all benefit from this newest of designs in transfer technology.
|
|
|
|
|
|
The working environment of working area will be changed more clean and quiet. The exist drag chain can't adjust this kind of regulation with their chain body condition of friction constructions.
That why we have developped sabin chain and finally finish to prepare all sabin chain series, sabin chain CR type(cleanroom type), sabin chain N type(Normal type), sabin chain S type(sliding type), sabin chain E type(enclosed type). We can meet the future requirement of working space with sabin chain series.
We can provide longer life cycle with this sabin chain with followings also.
1. use better raw material to make drag chain more durable, stronger and never breaking condition.
2. because of no friction, no dust, there is no loosing problem at the connection part like the exist drag chain and because of this, no breaking problem happen.
Chain material : CPS-polyamide with glass fiber reinforced, UL94-HB
Low Noise : 46dB(DIN EN 61672-1)
Speed : 10 meter/second
Temperature : -30°C ~ +130°C
Application : Gantry robot, Machining center, Textile machine, Welding machine, Feeder unit, Assembly loader, Wood work machine, Fabric machine
Production range :
ITEM PITCH INNER HEIGHT
CPS015 15 10
CPS020 20 14,5
CPS030 30 19
CPS033 33 24
CPS036N 36 27
CPS050N 50 40
CPS068N 68 40
CPS077N 77 50
CPS095N 95 54
CPS120N 120 80
CPS150N 150 113
|
|
Chain material : CPS-amide, UL94-HB
Low noise : 30dB
Low mote : CLASS2 / ISO CLASS 4
Speed : 15 meter/second
Temperature : -30°C ~ +130°C
Application :
Semiconductor production line which requests dust regulation CLASS 10, Automation machine tool or industrial machine which is needed high speed operation
Certification :
IPA dust test(VDI2083 CLASS2 / DIN EN 14644-1 ISO CLASS4)
TUV noise test(30dB - The quietest score in the world)
Production range :
sb018CR
ITEM PITCH INNER HEIGHT
sb018CR 18 15
sb020CR 20 22
sb025CR 25 28
sb035CR 35 40
sb045CR 45 50
sb060CR 60 62
sb075CR 75 80
|
|
Revolving chain can be applied for protection cables to the rotating machine or robot, designed by not bothering the motion and directivity of cable and protect the cables safely from outer dangerous factors.
Free bending radius process can control the bending radius and reverse bending radius of cable chain automatically and this new concept cable chain, maximize the mobility of bending radius, is developed by CP SYSTEM's own advanced technique and also already hae the patent for this technique.
And this is next generation cable chain which minimize the dust and noise by the unique bend connection method, can be applied to the working place which request the regulation of dust and noise.
This revolving chain can protect the cables more safely and improve the productivity very much.
Production range :
ITEM PITCH WIDTH
RV020CR 20 28
RV028CR 28 38
RV040CR 40 52
RV048CR 48 65
|
|
Chain materail : CPS-polyamide with glass fiber reinforced, UL94-HB
Low noise : 43dB(DIN EN 61672-1)
Speed : 10 meter /second
Temperature : -30°C ~ +130°C
Application : Gantry robot, Machine tool, Textile machine, Welding machine, Feeder unit, Assembly loader
Production range :
ITEM PITCH INNER HEIGHT
CPS036E 36 27
CPS050E 68 30,5
CPS070E 70 47
CPS078E 78 52
CPS090E 90 75
|
|
Chain materail : CPS-amide, UL94-HB
Low noise : 30dB
Low mote : CLASS2 / ISO CLASS 4
Speed : 15 meter/second
Temperature : -30°C ~ +130°C
Application : Semiconductor production line which requests dust requlation CLASS 10, industrial zone request low noise, automation machine tool or industrial machine which requires cable protection from dust or foreign substance.
Production range :
ITEM PITCH INNER HEIGHT
sb045E 45 45
sb060E 60 56
sb075E 75 78
|
|
|
|
|
|
The working environment of working area will be changed more clean and quiet. The exist drag chain can't adjust this kind of regulation with their chain body condition of friction constructions.
That why we have developped sabin chain and finally finish to prepare all sabin chain series, sabin chain CR type(cleanroom type), sabin chain N type(Normal type), sabin chain S type(sliding type), sabin chain E type(enclosed type). We can meet the future requirement of working space with sabin chain series.
We can provide longer life cycle with this sabin chain with followings also.
1. use better raw material to make drag chain more durable, stronger and never breaking condition.
2. because of no friction, no dust, there is no loosing problem at the connection part like the exist drag chain and because of this, no breaking problem happen.
Chain material : CPS-polyamide with glass fiber reinforced, UL94-HB
Low Noise : 40dB(DIN EN 61672-1)
Speed : 10 meter/second
Temperature : -30°C ~ +130°C
Application : Gantry robot, Machining center, Textile machine, Welding machine, Feeder unit, Assembly loader, Wood work machine, Fabric machine
|
|
| ... products without technical information |
| |
hand rope winch 'TANGO' with many advantages:
— corrosion resistant
— quiet running
— large rope capacity
— independent winding of rope possible
— compact form
— fully enclosed
— self-locking
— folding crank handle
— low weight
— proven security concept
— zinc plated or in stainless steel
— suitable for wall or base mounting
|
|
MPW open winch:
Our MPW multi-purpose winch units are built of large series sub-assemblies using modular system components manufactured to the most demanding quality requirements. The variable combination of these components makes it possible to implement the most efficient technical configuration for your application.
|
|
e.lift® 500-800-1000
"Personnel lifting hoists for suspended
platforms and temporary cradles".
The e.lift® hoist is available in 500 Kg, 800 kg and 1000kg versions. This hoist is used for personnel lifting combined with a suspended scaffolding, a cradle or an individual seat. Available in EN 1808 version and in version outside UE.
|
|
Thaler Cable Capstan winches are highquality products and represent the latest modern technical standard in the field of cable pulling winches.
Thaler Winches are built in accordance to the prescriptions of the cable industry, German Telekom and energy supply companies.
They are constructed under strict compliance with the machine guidelines of the European Community and with their chassis approved by TÜV (Technical Surveyance Authorities) they are admitted to the public traffic.
Short description:
- Double capstan system, both capstan heads are driven
- No chains between hydraulic engine and capstan system
- Hydrostatic drive
- Petrol or diesel engine
- Drum capacity for big rope lengths
- Automatic rope guidance to the drum
- Pulling force control by electronic measuring system with print out - SYSTEM KPR 2000 with PC interface
- Tandem axle chassis with overrunning brake, height adjustable drawbar with spindle support
- Metal hood
|
|
Wormgear winches VL250-1500kg
Wormgear winches WW2000-5000kg
Spurgear winches TL125-2000kg
GEBUWINch winches - accessories
GEBUWINch Special winches
|
|
|
|
|
|
X820P
Use the tirak® to drive suspended access platforms, powered working seats and work cages as well as silo inspection equipment and many more.
Travel to the work place with the tirak® at speeds up to 18 m/min which is a significant benefit the higher up you have to go.
No matter what height, the tirak® hoist will take you there safely and speedily.
For man riding application an independent secondary safety rope is required. A Blocstop® fall arrest device is connected to the safety rope and working platform and locks onto the safety rope in the unlikely event of failure of the hoisting rope.
The principle:
The tirak® operates on the principle of wire rope travel by clamping, using adhesive pulleys. The originality of the system is in the operation and arrangement of the pulleys. The units of the X and L-series have only a single driver disc. The grip of the wire rope on the pulleys is obtained by a set of rollers, operated by a pressure spring. There are two rollers used for the X-series and only one roller for the lightweight L-version.
|
|
|
|
|
|
Electric wire rope winch model RPE
Pulling force 250 - 1000 daN
The robust and extremely compact, practical cube design and universal rope lead-offs allow individual applications in almost any position.
Features
- Standard operating voltage 400 V, 50 Hz, 3-phase. 40% ED.
- Motors protected to IP 54.
Optional
- Different drum designs, e.g. extended to accommodate longer rope, machined grooves for exact reeling, with separation web and 2nd rope outlet for working with two ropes.
- Geared limit switches to limit rope motion in both directions.
- Single-phase A.C. motor 230 V, 50 Hz.
- Control by means of pendant control including control switch with emergency stop and 2 m long control cable.
- Contactor control with 42 V control voltage.
- Slack rope switch to automatically stop the winch when rope tension eases e.g. when the load touches down (only in combination with low voltage control).
- Frequency converter for stepless speed control.
- Adjustable slip clutch to protect the winch from overloading for models RPE 2-13, RPE 5-6 and RPE 5-12.
- Special design according to BGV C1 for theater stage applications available.
|
|
| ... products without technical information |
| |
... see all the products in the category
Winches
|
 see the results for the following category : EMI filters |
|
|
