|
|
Bruss hydraulic weighing system - model MHW
The Bruss MHW system is an oil pressure based weighing system which gives a cost effective way to weigh all your loads on your forks. You lift the load to a designated level and manullly lower the forks to a referance point - the MHW software takes and calculates the right weight and shows it in the display you can also use the system for overload protection - an optional warning buzzer stops the operator from handling the heavy load. With Bruss weighing on wheels you are a weigh ahead !!
|
|
Hydraulic fork lift truck weighing system MHW+
The Bruss MHW+ is an oil-based weighing system for fork lift trucks with superior accuracy combined with extreme ease of use. With this instrument you will no longer recieve incorrect values in your warehouse and your people can accuratly inform the transport company about the weight of the goods.
Dangerous heavy loads are spotted directly and can be dealt with accoordingly. Safety First!
The Return on investment is unique in the branche - ask your Material handling dealer for a quote. The MHW+ lowers the forks for 4 seconds and weighs the goods while in motion.
This ensure an accurate measurement of the oil pressure which are converted into kilograms.
With a Bruss MHW+ any weight is the right weight.
Bruss Weighing on Wheels
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks. For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system.
An oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck. The system is meant for simple check weighing, such as the checking of incoming goods , and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
|
|
|
|
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks.
RCS system
For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system. With the RCS an oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck.
The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
RCS PLUS system
The RCS PLUS is an accurate hydraulic weighing system for forklift trucks. On a forklift truck with a capacity of 2.500 kg the weight graduation is displayed in steps of 2 kg, with a 5 kg tolerance (+/- 0.2%). The RCS PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
|
|
The RCS-110-PLUS is an accurate hydraulic scale for counterbalanced trucks and reach trucks. On a forklift truck with a capacity of 5,000 lbs the weight is displayed in steps of 5 lbs, with a + 10 lbs tolerance. The RCS-110-PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
The RCS-110-PLUS is an excellent tool for weight checks on a forklift truck, for example at goods reception, when determining shipping weights, preventing overloads on freight trucks, stocktaking, stock control etcetera.
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks. For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system.
An oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck. The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
|
|
| ... products without technical information |
| |
Bruss hydraulic weighing system - model MHW
The Bruss MHW system is an oil pressure based weighing system which gives a cost effective way to weigh all your loads on your forks. You lift the load to a designated level and manullly lower the forks to a referance point - the MHW software takes and calculates the right weight and shows it in the display you can also use the system for overload protection - an optional warning buzzer stops the operator from handling the heavy load. With Bruss weighing on wheels you are a weigh ahead !!
|
|
Hydraulic fork lift truck weighing system MHW+
The Bruss MHW+ is an oil-based weighing system for fork lift trucks with superior accuracy combined with extreme ease of use. With this instrument you will no longer recieve incorrect values in your warehouse and your people can accuratly inform the transport company about the weight of the goods.
Dangerous heavy loads are spotted directly and can be dealt with accoordingly. Safety First!
The Return on investment is unique in the branche - ask your Material handling dealer for a quote. The MHW+ lowers the forks for 4 seconds and weighs the goods while in motion.
This ensure an accurate measurement of the oil pressure which are converted into kilograms.
With a Bruss MHW+ any weight is the right weight.
Bruss Weighing on Wheels
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks. For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system.
An oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck. The system is meant for simple check weighing, such as the checking of incoming goods , and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
|
|
|
|
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks.
RCS system
For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system. With the RCS an oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck.
The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
RCS PLUS system
The RCS PLUS is an accurate hydraulic weighing system for forklift trucks. On a forklift truck with a capacity of 2.500 kg the weight graduation is displayed in steps of 2 kg, with a 5 kg tolerance (+/- 0.2%). The RCS PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
|
|
The RCS-110-PLUS is an accurate hydraulic scale for counterbalanced trucks and reach trucks. On a forklift truck with a capacity of 5,000 lbs the weight is displayed in steps of 5 lbs, with a + 10 lbs tolerance. The RCS-110-PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
The RCS-110-PLUS is an excellent tool for weight checks on a forklift truck, for example at goods reception, when determining shipping weights, preventing overloads on freight trucks, stocktaking, stock control etcetera.
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks. For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system.
An oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck. The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
|
|
| ... products without technical information |
| |
ENR level controller
The ENR20 has one relay output (MIN/MAX contact). The ENR30 has also another independent contact .
Mounting on a 35 mm mounting rail
Dimensions : l=45 mm h=75mm p=105mm
ENR20
- level switching points : 2
- contacts : 1 changeover
- status indicators : 2 LEDs
- max. switched current : 6A
- switching delay : 0...10 s
- output voltage : 12...14V
- output current : 8mA
ENR30
- level switching points : 3
- contacts : 2 changeovers
- status indicators : 2 LEDs
- max. switched current : 6A
- switching delay : approx. 1 s
- output voltage : 12...14V
- output current : 8mA
|
|
SCOTC Oil tank to control
Description:
- Controller level/temperature.
- Tanks including opening of filling and air filter.
Advantages:
- Reduction of the obstruction of the tanks: 4 functions in 1!
- A simple adjustment of the points of commutation via the menu
- An analogical exit
- A protected control
- Reduction of the logistic costs, assembly and maintenance
Applications:
- Control of level/temperature of hydraulic tanks.
|
|
|
The gwk series teco tt has been designed especially for special require-ments of this type that arise in operation with such high temperatures. The specific heat surface loading is designed to be such that thermal decomposi-tion of the heat carrying oil can be prevented without fail at normal flow rates. Built-in flow monitoring ensures that an alarm is given if the flow rate becomes too low. It is necessary to prevent oxygen from entering into the system in order to avoid damage to the heat carrying oil from oxidation. The closed circuit of the teco tt units have a supply of cold oil in expansion vessel, which can also be equipped with a nitrogen covering supply device on request.
|
|
| ... products without technical information |
| |
|
|
|
|
These containers of recovery of waste oils of the SEMI type industrial Modhuile are equipped with a double tank of retention out of polyethylene, in conformity with standard XP-H-96618 and the decree of April 7th, 1997. Capacities: 600,1350 or 2500 liters. Broad funnel with boltable lid to pour waste oils. When the collector is full it is enough with the oil pick-up to remove the grid of filtration of the funnel and, to plunge its nozzle of aspiration to carry out draining. Finally it are equipped out of standard with a gauge with level and, of an electronic system of detection of escapes between the 2 tanks.
IN OPTION: Connection fireman DNN 50 if you do not want us that the oil pick-up uses the funnel of discharge to carry out draining collector as it is full.
This polyethylene collector answers perfectly a use in saline medium or corosifs. Simple of use, Their respective capacities of 600,1350, and 2500 liters meet the needs for each one. The gauge of level will enable you to know when the collector is full and will avoid any inopportune overflow. Its double tank of retention, in conformity with the regulations in force avoids any accidental pollution Enfin its system of detection ant-escape between the 2 walls will inform you in the event of escape of the receiving tank. Modhuile indistrielle of SEMI type fulfills the environmental requirements thus perfectly
|
|
|
|
|
|
Container of worn engine oil recovery standard M 1200 cd. This container is équipéd' a double tank of retention in conformity with standard XP-H-96618 and with the decree of the 4/7/1997, Its low part out of steel or stainless with an oil storage capacity of 1200 liters and its high part out of polyethylene has a receptacle for the storage of the empty cans of 750 liters. These other characteristics: measure level, counter of discharge of great capacity, connection of pumping DNN 50 standardized for the draining of the collector, ring of levage.FABRICATION FRENCH
This worn oil collector offers an excellent report/ratio QUALITE/PRIX. Its gauge of level will enable you to see when the collector is full and, that will avoid any inopportune overflow thus. Its under anti-corrosion layer and its completion in partly low painting polyurethane protects it from the bad weather and UV; Its high part out of polyethylene is appropriate perfectly for a use in saline medium. Finally its double tank of retention in conformity with standard XP-H-96618 and the decree of the 4/7/1997 avoids any inopportune pollution in the case or the receiving tank would be bored. He fulfills the environmental requirements thus perfectly
|
|
|
|
|
|
Container of worn engine oil recovery standard R1000 or R 1500. These containers entirely metal are equipped with a double tank of retention in conformity with standard XP-H-96618 and with the decree of the 4/7/1997, they have a respective oil storage capacity of 1250 or 1700 liters and 800 and 1250 liters for the storage of the empty cans. Another characteristics: measure level, counter of discharge of great capacity with shutter of protection and automatic system of locking per float when the collector is full, connection of pumping DNN 50 standardized for the draining of the collector. FRENCH MANUFACTURE
This worn oil collector, entirely metal, is robust and, an increased protection against the fire and vandalism offers. Its broad counter of discharge is equipped with a rain-proof shutter and an automatic system of locking when the collector is full: that avoids any inopportune overflow thus. Its under anti-corrosion layer and its completion in painting polyurethane protects it from the bad weather and of UV and, thus guarantees to him an optimal lifespan. Finally its double tank of retention in conformity with standard XP-H-96618 and the decree of the 4/7/1997 avoids any inopportune pollution in the case or the receiving tank would be bored. He fulfills the environmental requirements thus perfectly
|
|
Bunded Waste Oil Tanks
Tuffa 1400VBWOS
Capacity: 1400 litres / 300 gallons
Dimensions: 1576mm (DIA) x 1800mm (H)
Product Description - Complete with:
* Tundish
* Filter
* Vent
* Easy access yellow flip lid
A Tuffa Waste Oil Tank would benefit businesses in the motoring industry such as Garages, Bus Depots, Haulage companies etc. It will ensure that the waste oil is stored safely and securely at a reasonable price.
The Tuffa bunded waste oil tanks are designed with pollution control in mind and are manufactured to all appropriate current legislations with in the oil industry, pending correct installation. bunded waste oil tanks come in a range of sizes
|
|
|
|
|
|
This container of recovery of waste oils or the effluents (gray water or black water) with double tank of retention, out of polyethylene, is in conformity with standard XP-H-96118 and the decree of the 4/7/1997. With capacity 2500 and 5000 liters, it is equipped with an electric or manual pump and a nozzle of aspiration.
Other characteristics: trap door of access to the boltable pump, measures level, electronic system of detection of the escapes between the two walls, indicator digital of level with remote sensing, Raccord FIREMAN DNN 50.
It at summer especially conceived for the marinas.
it makes it possible to directly aspire waste oils or effluents to the source. Its great capacity makes it possible to space the draining of the collector. Its system of sensing remote when the collector is full allows to the person in charge of management waste not to systematically on the spot check the level of filling of the collector.
Its polyethilene structure protects it perfectly from the saline air and corrosion.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
