|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks. For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system.
An oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck. The system is meant for simple check weighing, such as the checking of incoming goods , and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
|
|
|
|
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks.
RCS system
For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system. With the RCS an oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck.
The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
RCS PLUS system
The RCS PLUS is an accurate hydraulic weighing system for forklift trucks. On a forklift truck with a capacity of 2.500 kg the weight graduation is displayed in steps of 2 kg, with a 5 kg tolerance (+/- 0.2%). The RCS PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
|
|
Carriage scale for lift trucks
The RVL weighing carriage plate allows weighing in combination with attachments, like clamps or rotators: the carriage plate scale is mounted between the original carriage plate of the trucks and the attachment, via standard Class 2 or 3 fittings.
The 110 weight indicator is mounted in the cabin of the truck. Signal transfer from carriage plate scale to indicator is by Bluetooth connection.
Since the combination of carriage plate scale and attachment causes a displacement of the center of gravity of the load on the forks, it is advised to recalculate the residual lifting capacity of the truck.
|
|
Hydraulic fork lift truck weighing system MHW+
The Bruss MHW+ is an oil-based weighing system for fork lift trucks with superior accuracy combined with extreme ease of use. With this instrument you will no longer recieve incorrect values in your warehouse and your people can accuratly inform the transport company about the weight of the goods.
Dangerous heavy loads are spotted directly and can be dealt with accoordingly. Safety First!
The Return on investment is unique in the branche - ask your Material handling dealer for a quote. The MHW+ lowers the forks for 4 seconds and weighs the goods while in motion.
This ensure an accurate measurement of the oil pressure which are converted into kilograms.
With a Bruss MHW+ any weight is the right weight.
Bruss Weighing on Wheels
|
|
Bruss hydraulic weighing system - model MHW
The Bruss MHW system is an oil pressure based weighing system which gives a cost effective way to weigh all your loads on your forks. You lift the load to a designated level and manullly lower the forks to a referance point - the MHW software takes and calculates the right weight and shows it in the display you can also use the system for overload protection - an optional warning buzzer stops the operator from handling the heavy load. With Bruss weighing on wheels you are a weigh ahead !!
|
|
The RCS-110-PLUS is an accurate hydraulic scale for counterbalanced trucks and reach trucks. On a forklift truck with a capacity of 5,000 lbs the weight is displayed in steps of 5 lbs, with a + 10 lbs tolerance. The RCS-110-PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
The RCS-110-PLUS is an excellent tool for weight checks on a forklift truck, for example at goods reception, when determining shipping weights, preventing overloads on freight trucks, stocktaking, stock control etcetera.
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks. For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system.
An oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck. The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
|
|
Lifter PX 20 20S4 1185x555
Main features
Nominal load capacity : 2000 kg
Frame material : Painted steel
Fork length : 1185 mm
Fork width : 180 mm
Accuracy : 0,1 %
Division : 1 kg
Scale Series
The Scale Series is available in two different models, both with an intelligent weighing device with several options. Suitable for lifting and carrying heavy loads, this Series is not designed for "official" weighing but is extremely helpful for internal use.
|
|
| ... products without technical information |
| |
Portable vibration measuring device for checking the vibrations caused by the tool, toolholder and spindle assembly with local correction of the unbalance.
The device is a carry-on unit which can be used to balance any rotating body – such as grinding wheels, pulleys, fans, rotors, etc. –in the workshop.
Features:
- Measures vibrations and unbalance.
- Availability of different unbalance correction methods.
- User-friendly, step by step driven unbalance procedure.
- Connectable to the bench unit BEST BALANCE 2000 Plus thus obtaining a complete manual tool and toolholder balancing machine.
- Rugged and ease to use
Advantages:
Helps to keep the vibrations within preset limits achieving:
- Longer tool life
- Better surface finishing
- Longer life of the spindle and bearings of the spindle
- Noise reduction
- Breakages prevention
|
|
SmartBalancer2 – Avoid unbalance in your business
Over 50% of all problems, faults and breakdowns of machinery are directly or indirectly attributable to unbalance of rotors. This causes premature wear of the bearings, fatigue fractures and catastrophic failure or to shaft deformation. This puts your operating personnel at risk, and can result in unexpected breakdowns of machinery and systems.
Profit from the complete field balancing package
The SmartBalancer2 is a practical aid, which thanks to its comprehensive diagnosis tools, quickly gives you an overview of the state of balance of your machinery and systems. This handy, battery operated device enables rotors to be balanced quickly, cost effectively and accurately in the installed condition – in one and two planes, i.e. statically and dynamically.
|
|
|
The Adash 4201 instrument is a portable, fully digital balancing and vibration analyser with the possibility of on-line measurements and data storing. It is intended for identification of bearing condition, lubrication and mechanical defects of the whole machine. It enables to apply diagnostics at the level of measurement overall values, FFT analyses and time signal measurement. Its equipment enables not only detection of occurring defects but also their detailed analysis and precise specification. It can also be used for single and two plane machine balancing and for run-up and run-out measurements. The analyser is characteristic by its very easy operation. If used with the DDS 2007 database and expert system, it is suitable for both experienced users and beginners. Also is possible to use simple A4000Download software. If used with the MDS 5.00 user software, it enables to evaluation the machine deflection shapes.
|
|
Vibrometers / Balancing Instruments
MinIbalancer MI 2100
The MinIbalancer MI 2100 by Hofmann is the state-of-the-art field balancing instrument for balancing rotating machinery in one or two planes under operating conditions.
Features:
Designed for field balancing in one or two planes
Best balancing results thanks to simple, clearly structured operation
Additional measurement of overall vibrations in order to detect unbalance problems
Measurement of the condition value of rolling bearings (option)
Balancing protocol directly to external printer (option)
Handy instrument body with fold-out stand
Application:
Field balancing on site
Balancing in production and assembly under field conditions
Measuring vibrations on bearings and machine housings
Determine overall or unbalance vibrations
Monitoring rolling bearing condition
Measuring rotational speed
|
|
Grinding Wheel Balancing Device
Easybalancer EB 3100
EB 3100 is a device for balancing grinding wheels under operating conditions in the grinding machine. The unbalance correction can be performed using two or three sliding weights.
Features:
Specially adapted to the balancing of grinding wheels
Simple operation for best balancing results and quiet running
Applications:
Field balancing of grinding wheels
Measurement of spindle vibrations
Measurement of spindle speed
|
|
|
The 795M is an economical portable single channel multi-function data collector and 1600 lines FFT spectrum analyzer. It is versatile for overall values measurement, bearing condition diagnostic, spectrum diagnosis and in-situ multi-plane balancing of rotating machinery (up to 8 planes of correction, up to 16 point to check vibration). It is a simple and useful device that allows for easy condition monitoring and unbalance correction of any rotating equipment found almost in every process industries. With the Windows based “ConSpect” software, it creates an easy to use, cost effective, scalable solution that meets the needs of the novice as well as advanced user. The small, rugged, and light weight IP65 design makes it ideal for any harsh industrial environments.
|
|
USB BALANCER
The solution for the detection and the correction of the unbalancing of rotatory elements. Directly linked to the USB port of the PC the USB Balancer allows in a few minutes the automatic identification of the rotary speed, the determination of unbalancing quantity and the instructions for the correct balancing. The absence of photocells and of any additional electronics guarantees the extreme handling of the product at very low costs. Furthermore, the USB Balancer allows:
- no need to do a periodical calibration
- quick installation
- triaxial acceleration reading with selection of unbalancing plane
- automatic reports at the end of measurements
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
