|
|
|
|
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks.
RCS system
For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system. With the RCS an oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck.
The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
RCS PLUS system
The RCS PLUS is an accurate hydraulic weighing system for forklift trucks. On a forklift truck with a capacity of 2.500 kg the weight graduation is displayed in steps of 2 kg, with a 5 kg tolerance (+/- 0.2%). The RCS PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks. For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system.
An oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck. The system is meant for simple check weighing, such as the checking of incoming goods , and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
|
|
Bruss hydraulic weighing system - model MHW
The Bruss MHW system is an oil pressure based weighing system which gives a cost effective way to weigh all your loads on your forks. You lift the load to a designated level and manullly lower the forks to a referance point - the MHW software takes and calculates the right weight and shows it in the display you can also use the system for overload protection - an optional warning buzzer stops the operator from handling the heavy load. With Bruss weighing on wheels you are a weigh ahead !!
|
|
Hydraulic fork lift truck weighing system MHW+
The Bruss MHW+ is an oil-based weighing system for fork lift trucks with superior accuracy combined with extreme ease of use. With this instrument you will no longer recieve incorrect values in your warehouse and your people can accuratly inform the transport company about the weight of the goods.
Dangerous heavy loads are spotted directly and can be dealt with accoordingly. Safety First!
The Return on investment is unique in the branche - ask your Material handling dealer for a quote. The MHW+ lowers the forks for 4 seconds and weighs the goods while in motion.
This ensure an accurate measurement of the oil pressure which are converted into kilograms.
With a Bruss MHW+ any weight is the right weight.
Bruss Weighing on Wheels
|
|
RAVAS supplies a complete range of scales for mounting on forklift trucks. For simple check weighing, where a high accuracy is not required, there is the RCS hydraulic load indication system.
An oil pressure sensor is installed onto the hydraulic circuit of the forklift by means of a T-coupling. The indicator in the cabin translates the measurement into a weight indication of the load on the forks. The RCS has a limited accuracy, with a possible error of maximum 2% of the lifting capacity of the truck. The system is meant for simple check weighing, such as the checking of incoming goods, and for avoiding the overloading of lorries, warehouse racking and the forklift truck itself.
|
|
The RCS-110-PLUS is an accurate hydraulic scale for counterbalanced trucks and reach trucks. On a forklift truck with a capacity of 5,000 lbs the weight is displayed in steps of 5 lbs, with a + 10 lbs tolerance. The RCS-110-PLUS weighs by measuring the pressure in the hydraulic lifting system of the forklift truck, via a temperature compensated sensor on a valve block.
During a controlled descent of the mast the pressure in the hydraulic system is measured repeatedly, the software translates these measurements into an accurate weight indication of the load on the forks.
The RCS-110-PLUS is an excellent tool for weight checks on a forklift truck, for example at goods reception, when determining shipping weights, preventing overloads on freight trucks, stocktaking, stock control etcetera.
|
|
APPLICATIONS
Model TPC weighing stacker has been designed to satisfy all needs of industrial weighing market.
It does perform the ideal solution for many weighing operation both automatic and manual, such as:
- Container filling
- Production test
- Pallets weighing
MAIN FEATURES :
- Heavy construction
- Four load cell weighing system
- No levers nor moving parts
- Stainless steel or nickel plated shafts
- Hydraulic lifting pump with three position control handle on the steering beam and downward control valve
- "Continental" rubber Wheels plus polyurethane rollers on top of forks allow easy movements with a minimum of vibrations
- Several weighing functions including weight totalization, preset tare and printing
- High battery life
|
|
Mobile Weight Cart
- Small and compact electronics specially developed fo mobile wighing.
- Highest level of water and humidity resistance.
- Smaller housing is more robust and withstands impacts and vibration better.
- One electornic board without connectors means reliability for many years in the hardest applications.
- Lower weight of the scale is self;122kg,means easier handling of the scale.
- More reliability for the hardest applications and environments.
- Lower power consumptions makes scale more user friendly.New batteries are only needed one time per year when weighting 10 pallets per day.
- 4penlight batteries can be changed without any effort.
- Auto shut off prevents the batteries to be discharged when client forgets to trun the in dicator off.
- Summation of weights with sequence numberallows verification if the total load has been weighed.
|
|
|
The truck mounted weighing system enables you to weigh goods on site. This not only saves time but also eliminates the risk of damage during transport to a fixed weighing platform. The system has been specifically designed to check the weight of incoming, outgoing goods, quantity, count components and for dosing purposes.
|
|
All brands of electric pallet trucks and order picking trucks can be equipped with the RPW EL scale. The fork construction of the truck is mechanically modified, in order to mount the scale components with only 5 mm of added fork height.
A scale indicator of your choice shows the weight on the forks and communicates with a truck terminal or warehouse management system if desired. Every load lifted is instantly weighed.
For checking incoming goods while offloading lorries, for preventing errors in order picking, for determining shipping weights, and for preventing the overloading of lorries.
Optional ATEX
|
|
Weighing forklift truck forks of Bruss
The GZW RF-B weighing forks are an autonomous weighing system functioning independent of the truck. The weighing forks can be quickly installed on the carriage plate and are easy to exchange between trucks: signal transmission between the forks and the indicator within reach in the cabin is via radio frequency transmission, there is no cabling. With the Bruss GZW RF-B you can weigh pallets and containers during transport, right where the handling takes place. You save time in checking incoming and outgoing goods, in determining expedition weights and in filling big bags in production. The exchangeable battery module guarantees a continuous use of up to 12 hours.
|
|
RPW-EL
All brands of walkie pallet trucks, rider pallet trucks and order picking trucks can be equipped with a RAVAS RPW EL scale. The fork construction of the truck is mechanically modified in order to mount the scale components, with only 0.25 inch of added fork height. The 110 or 310 indicator shows the weight on the forks and can communicate this weight with a truck terminal or warehouse management system. For checking incoming goods, avoiding picking errors, or avoiding overloads on freight trucks.
|
|
The RAVAS-2100 EXi is an explosion proof hand pallet truck scale fully equipped for use in hazardous environments. This pallet trucks scale is ATEX certified and standard equipped with stainless steel fork shoes.
The RAVAS-2100 EXi is suitable for applications like filling, mixing and dosing in EX environments. The scale is ATEX certified and standard equipped with:
- stainless steel fork shoes;
- a rotating indicator (readable from all angles during dosing processes) and
- large push buttons (for use when wearing gloves).
|
|
The RAVAS-1 is the ideal entry model for anyone who wants to experience the advantages of mobile weighing. At 575 EUR (advisory list price) the RAVAS-1 offers a weight indication in 5 kg steps, with a tolerance of + 20 kg.
The RAVAS-1 is based on a completely new, patented technical concept. There are no changes at all to the pallet truck forks, which retain their original dimensions. This guarantees easy entrance into low or closed pallets.
The RAVAS-1 is meant for general check weighing, at goods reception, when determining shipping weights, for preventing overloads and for safety checks. Since there are no components installed in the forks, the pallet truck scale is virtually indestructible. This also makes it suitable for very rough applications, e.g. in production areas or on board lorries.
|
|
RAVAS-1100: weighing pallet truck for a reasonable accuracy
The RAVAS-1100 is the cost-conscious solution for checking weights a few times a day, e.g. at goods reception or when filling out transport documents. Weights are shown in 1kg steps.
Thanks to the robust chassis and the power supply by four standard AA-batteries, this pallet truck scale combines an attractive price level with a reasonable accuracy. The display is able to show both gross and net weights. For checking incoming goods, avoiding overloads and determining shipping weights.
|
|
Multi-range graduations
The RAVAS-2100 is a hand pallet truck with all basic scale functions. Suitable for all accurate check weighing.
Gross/net weighing, zero correction and an adding memory for calculating the total weight per shipment or order. If a printer is installed, both separate weights and total weight are printed on the ticket.
|
|
|
|
|
|
iForks, the world first completely wireless scale forks for forklift trucks, reach trucks and narrow aisle trucks. Since all components are fully integrated in the forks, the iForks have no external cabling whatsoever and the weighing system can be installed onto any forklift truck in a matter of minutes: plug & weigh! From that moment on, every load lifted by the truck is instantly and accurately weighed.
iFORKS IS RESISTANT FOR ROUGH USE AND EXTREMELY COMPACT
Each scale fork communicates the weight lifted with the weight indicator in the cabin via Bluetooth. The weighing system is powered by robust, exchangeable battery modules. All electronics and power components are exclusively developed by RAVAS for the iForks concept. Which is why they are resistant to rough use and also extremely compact, fork dimensions (w x h = 133 x 58 mm) very close to those of standard lift truck forks.
iFORKS: EASY TO USE AND LOW COSTS
The iForks weight indicator in the cabin shows the weight of the load on the forks and offers a complete range of weighing functions: gross/net weighing, total weight per shipment, code entry, date/time registration, and piece counting. The indicator can provide weight data transfer to a printer, a data terminal, or directly to a WMS or ERP system, via RS232, Bluetooth or WiFi. The display is equipped with backlight, making it perfectly readable even in the darkest corners of a warehouse or production environment. iForks offers Digital Calibration Technology: via the keys of the indicator the scale can be digitally adjusted, quickly and accurately. Which makes for a very maintenance friendly weighing system and low cost of ownership.
|
|
Electrical pallet trucks with integrated weighing system
The EGW – B weighing system can be installed on any brand of electrical pallet truck. The weighing system has a high accuracy and is available in legal for trade version. The construction consists of two parts. The forks of the electrical pallet truck are modified and fitted out with four or six load cells of 1000 kg. A pair of fork shoes are fixed rigidly onto the load cells. This construction without moving parts guarantees a very robust build of the weighing system. The weight indicator and any peripheral equipment are mounted in such a way as to achieve optimal visibility without obstructing a proper operation of the truck.
|
|
Explosion proof weighing hand pallet truck model HGW-BX
The HGW-BX combines the controlling function of a very accurate weighing system with the mobility and the flexible availability of a hand pallet truck. With the Bruss HGW-BX you weigh pallets and containers during transport, at the place of handling. You save time when checking incoming and outgoing goods and during the dosing and filling process. The HGW-BX is developed for use in EX-zones. The system is equipped as standard with rotating indicator, large pushbuttons and stainless steel forks. The exchangeable battery module provides a use of 100 hours, and can be exchanged within the EX-zone.
|
|
|
|
|
|
Fork-lift with integrated weighing system for use in Ex-zones
For flexible use in Ex-zones, such as dosing or filling, this concept offers numerous individual possibilities.
Flexible work though swivelling backlit terminal.
Manual tare input via alphanumerical keyboard.
With serial weighing-cell impact protection.
Easily exchanged rechargeable battery in Ex-zones via housing door.
For use in Ex-zones:
Zones 1, 2, 21 and 22
Ex-classes:
II 2G IIC T4
II 2D T50°C
-10°C Ta + 40°C
VL 3000 EX: entirely in stainless steel 1.4301
with rapid-lift hydraulics and soft lowering.
SL 3000 EX: in powder-coated steel
with electropolished electronic housing
with steel lift-hydraulics and soft lowering
Dimensions: 1190 x 540 x 1200 mm
Underclearance: 90 mm
Lift height: 110 mm
Weighing range: 10-2000 kg
Resolution: 0.5 kg
Duration of charge, rechargeable battery: approx. 140 h continuous operation
Charging device: multi-level with charge conservation (only to be charged in non-EX-zones)
Castor wheels: in polyamide or polyurethane, as required
Load rollers: optional polyamide or polyurethane tandem rollers
Weight: approx. 195 kg
|
|
IU Pallet Scales
…from 10 g to 1,500 kg allow exceptionally flexible use.
• 1 x 3,000e | 2 x 3,000e (for legal metrology); class III
• High resolution can be set
• High protection rating: IP68
• Hot-galvanized or stainless steel version
• Can be used Zones 1, 2, 21, 22
|
|
Bruss weighing hand pallet truck model Xtra-B
The Xtra-B combines the controlling function of a very accurate weighing system with the mobility and the flexible availability of a hand pallet truck. With the Bruss Xtra-B you weigh pallets and containers during transport, at the place of handling. You save time when checking incoming and outgoing goods and during dosing and filling processes. The Xtra-B is developed for industrial applications and is protected against water, dust and shocks. The exchangeable battery module provides for 35 hours of use.
|
|
Bruss weighing hand pallet truck model HGW-M
The HGW-M combines the controlling function of a very accurate weighing system with the mobility and the flexible availability of a hand pallet truck. With the Bruss HGW-M you weigh pallets and containers during transport, at the place of handling. You save time while checking incoming and outgoing goods, and during dosing and filling processes, and when doing piece counts. The HGW-M is developed for industrial applications and is protected against water, dust and shocks. The exchangeable battery module provides use for 8 hours.
|
|
The RAVAS-110 is the cost-conscious solution for checking weights a few times a day, e.g. at goods reception or when filling out transport documents. Weights are shown in 2 lbs steps.
Thanks to the robust chassis and the power supply by four standard AA-batteries, this pallet truck scale combines an attractive price level with a good accuracy. The display is able to show both gross and net weights and calculate total weight per shipment. For checking incoming goods, avoiding overloads and determining shipping weights
|
|
|
|
|
|
The true weighing experts from SCHNEIDER:
weighing, counting, dosing, prescriptions, filling, order picking, documentation.
With its highly accurate constructions and technical konw-how, SCHNEIDER is in a position to offer a verfiable, multi range and interval scale.
Multi-range and multi-interval capability
(e.g. 4-600 kg / -1500 kg; 0.2 kg / 0.5 kg)
The high resolution multi interval scale features a measuring range that consits of several partitions with differing sclae gradations. When there's an in- or decrease of load, the maesuring range is automatically determined by total load. Due to its partitioned measuring range, the scale allows for more work flexibility for the end user than a multi rangs scale. Switching to a lower partition after tarring by using a given pre load value is possible.
The multiple range of the scale are each treated as a single range scale. Switching between different weigh areas while being loaded is only permissible with increasing calibratin value.
SCHNEIDER weigh-trucks:
- Repeat accuracy weighing
- Floated mounting of load-cells
- Maintenance-free and fail-safe
- No grease nippleEx-protection and GMP-compliant
- GMP hygiene standards
- Compatible with any renown manufacturer of weighing technology
|
|
Bruss weighing hand pallet truck model Bruss Basic
Hand pallet truck scale for all your daily check weighing throughout your company. This robust and tested system is ideal for the cost conscious user. The compact LCD indicator of the Bruss Basic shows the weight in steps of 1 kg and works on four AA batteries (each 1.5V). The Bruss Basic is very suitable for performing weight checks of incoming and outgoing goods. Designed for mobile use! No moving parts inside. The leader in the branch.
|
|
The RAVAS-310 is an advanced hand pallet truck scale with extended scale functions, such as a piece counting program and the possibility of adding an article or client number to each weight. The RAVAS-310 has a built-in printer and is standard NTEP approved legal-for-trade.
In addition to basic weighing functions, the RAVAS-310 offers a piece-counting program with manual entry or sampling of the piece weight, and has the possibility of entering a client or article number that is printed with date and time by the integrated printer. This makes the RAVAS-310 suitable for counting parts, (automatic) mixing and dosing, invoicing and for communicating weight data to a PC or wireless network.
|
|
|
|
|
|
iForks, the world's first completely wireless scale forks for forklift trucks, reach trucks and narrow aisle trucks. Since all components are fully integrated in the forks, the iForks have no external cabling whatsoever and the weighing system can be installed onto any forklift truck in a matter of minutes: plug & weigh! From that moment on, every load lifted by the truck is instantly and accurately weighed.
Each scale fork communicates the weight lifted with the weight indicator in the cabin via Bluetooth. The weighing system is powered by robust, exchangeable battery modules. All electronics and power components are exclusively developed by RAVAS for the iForks concept. Which is why they are not only resistant to rough use, but also extremely compact, keeping the fork dimensions (w x h = 5.2 x 2.1 inch) very close to those of standard lift truck forks and making sure that the user does not loose any handling performance.
iForks are suitable for accurate check weighing: checking incoming goods, determining shipping weights, filling big bags. The legal for trade version with NTEP-approval will be available soon.
|
|
Features
The Portable Pallet Scale 2815 can weigh directly on the loading ramp. This reduces loading and unloading times and frees up personnel. It's not the pallets that have to go to the scale, it's the other way round. The front has a handle for carrying, and castors are attached to the fork ends as standard.
Design
- Industry-standard steel construction, painted light grey, also in
stainless steel 1.4301; load cells also made of stainless steel, Protection
Class IP 68.
- 6m measuring cable to connect the pallet scale to the indicator.
- Function for counting mass parts of identical weights
- Program Terminal 3030, Indicator 2761 and our Indicator 2790 are
equipped with piece count function as standard.
- With lighter parts, it is recommended to connect an additional scale
(reference scale) with a smaller weighing range.
- Scale with 6m measuring cable (other cable lengths possible).
|
|
Capacity: Kg 2000
Total Lift Height: mm 200
Lowered Height: mm 85
Fork Length: mm 1150
Fork Width : mm 540 / 705
Raised Height: mm 200mm
Truck Weight: Kg 100 - 110
OPTIONS: Single or Tandem Rollers
Also available with Printer Option
|
|
|
|
