|
|
| mageba earthquake bearings RESTON®POT Type HDPB (High Damping Pot Bearing) combine the advantage of a pot bearing with the shock absorbing qualities of hydraulic buffers. The design of the maintenance free hydraulic buffers corresponds to the most advanced specifications regarding anti-seismic behaviour of bridges. Under normal conditions, the bearing acts as normal pot bearing. |
|
| ... products without technical information |
| |
| SENCITY®LINK operates at a frequency of 60 Ghz with a net data rate of 100 Mbps full duplex over a distance of up to 800 m (2600 ft). Measuring only 16x16 cm (6.3"x 6.3"), its compact size is due to deep integration of its active and passive components. The SENCITY® Link system is unique in its small unobtrusive size and ease of installation which is facilitated by the simplicity of an optical pointing and alignment bracket. Extensive trials and customer installations have proven that this HUBER+SUHNER solution mitigates expensive civil works and minimizes visual impact. |
|
The 9160 G2 is our newest and most advanced Wireless Gateway. This long range wireless access point enables you to mix and match RF technologies to best suit your requirements. The 9160 G2 offers support for dual 802.11 radios for a range of wireless applications. The 9160 G2 delivers robust security, with the ability to scale from basic WEP all the way up to 802.11i with AES encryption.
Industrial housing for demanding environments
Dual radio, 2.4 and 5 Ghz multi-band access point supporting 802.11 a/b/g/ radio standards
Enhanced real-time diagnostics and configurations via SNMP, HTTP, Telnet or serial console
Scaleable security
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
The Modular System for Engineering Structures
PERI engineers have created ideal project and connecting method combinations from known tunnel, bridge and construction engineering load combinations, and developed this to form a versatile construction kit. This means load-optimized and geometrically-adapted supporting formwork can be built from a large selection of system components.
VARIOKIT, the engineering construction kit with rentable, standardized components, is the solution for numerous requirements in civil engineering:
- fast
- safe
- cost-effective
In the process, PERI provides technical information for each project e.g. operating instructions and assembly drawings. Static calculations and assembly support are also integral elements such as the constant support given to contractors and help provided with new tasks for current projects. For all construction projects, PERI can provide everything from one source. |
|
Solartron Metrology produces a range of versatile electronic conditioning units for their range of LVDT and Half Bridge transducers.
Unit shown is the OD2
• True two wire transmitter
• 4 to 20mA output
• Power and signal on same wires
• Environmentally sealed (IP65)
• Ideal for remote measurements
• Wired in connectors
• Power Supply 13 to 48V dc, 30mA
|
|
Rigid toothed belt axes in 2 sizes. Select and attach drives freely or even with integrated drive and control for easiest initial start-up and wiring. Control directly from SPS(I/O) or over fieldbus.
|
|
The basis of the system program consists of portal-, vertical- and telescopic axis of the line AXS. These modules from the system program can be combined any way or with the line AXC to create optimally construed multi linear axis systems.
• Custom- made solutions by using components which are individually harmonised with the application: Linear axis with rack and pinion drive are especially suitable for applications with great stroke length - up to 12 m self- supporting, as butt joint version theoretic unlimited stroke length.
• Z- axis for taking vertical loads up to 1000 kg.
Optimally construed multi linear axis systems harmonised with the focal points of the customers requirements: Portal axis, Z- axis and telescopic axis from the system program can be combined any way.
|
|
High rigidity and flexible fitting by highst precision in manufacturing. Flexibly expanding intermediate positions increase the possibility of applications.
|
|
Two Axes of Motion in One Housing!
Rigid Design Holds Guide Shafts at Both Ends
Deflection Under Heavy Loads is Greatly Reduced
Air Cushions Standard on 1" & 1.5" Bore Sizes
Precision Mounting Surfaces with Tooling Holes for Grippers and Tooling. Custom Faceplates are Available
Heavy Wall Cylinders Built Into Housing
Case Hardened Shafting
Composite Bushings or High Precision Linear Ball Bearings Provide Accurate and Repeatable Motion
Floating Couplers
Pre-Mounted Cable Carriers
Adjustable Shock Absorbers
Optional Threaded Stop Collars for Fine Stroke Adjustment
Dovetail Sensors with Optional "Quick Disconnect" |
|
an electric linear module for Gantries with linear Axes
example: Gantries and systems multi axes |
|
| ... products without technical information |
| |
| Small, step motor driven stages for light weight (1-15 kg) payload scanning and positioning. Travel ranges from 5 cm to 75 cm. Includes stages, motors and programmable motor controller. |
|
The gantries isel are composed of linear advances and guidance of precision, are regulated without play with drive by engines step by step or, in option, by Servo-moteurs. The precision of repeatability is about + 0,02mm.
The gantries have a whole a very large surface of fastening, with a flatness < 0,05mm. The rigidity of the machines is ensured by 16 linear stages for only axis Y.
The advances are protected from dust and the chips, by Teflon joints with lips.
units of advances of precision
advances regulated without play with drive by engine step by step
reproducibility (in position) ±0,02mm
plane milled surfaces, flatness < 0,05mm
great load rigidity and capacity raised thanks to the 16 linear stages
covering with rubber lips coated with Teflon
precision of the position extremes and reference < 0,0125 mm for a step of 5mm
options: no the screw different
|
|
| ... products without technical information |
| |
cNC double column planer type
PSGP - CNC TYPE
Longitudinal Hydraulic
Cross CNC controlled
Vertical CNC controlled
Controller FANUC
Cross Slideways Flat-Dovetail Gibbed Ways
Longitudinal Slideways Double Vee-Ways
Straightness of table movement in longitudinal direction 0.02mm/m.
Straightness of table movement in transverse direction 0.02mm/m.
Vertical travel of wheelhead square with table in transverse plane 0.01mm/100mm.
Hydraulic table speed (60Hz) 2 - 25 (1 - 25)m/min
Hydraulic motor 7.5kW/10HP
Clearance between the columns 1200mm
Intermittent cross feed (Electro-Mechanical) approx. 0.1 - 35mm/feed
Continuous cross feed (Electro-Mechanical) approx. 3m/min
1 revolution on cross handwheel 10mm
1 division on cross handwheel 0.05mm
Rapid vertical traverse(approx.) (50Hz) 240mm/min
1 revolution on vertical handwheel 0.25mm
1 division on vertical handwheel 0.002mm
Wheel dimension (O.D x W x I.D) 500x100x203.2mm
Horizontal head spindle motor 11 (15,18.5) kW/15 (20,25)HP
Vertical head spindle motor 7.5kW/10HP
Wheel speed 50/60Hz 1150 r.p.m. |
|
Features:
The compact surface grinder to grind the wide work such as large metal mold, large plate and ceramics plate.
Universal head equipped for grinding the slide-ways of machine tools or industrial machines, jigs and the component of general precision machines.
Large box design castings are made of high quality ribbed cast iron.
X-axis table with Turcite-B lining, Y &Z axes are box ways with AC servo drive.
The large spindle is support by CP4 precision angular contact ball bearings. 20HP motor ensures powerful accurate cutting.
The overhead dresser is integrated into an automatic wheel compensation system.
An independent control box with an ergonomically designed panel offers a comfortable and convenient operation environment.
Modern 10.4" color LCD touch screen panel, simply touch the screen to set the grinding variables.
Manual Pulse Generator (MPG) is also provided for user's convenience for both down feed and cross feed.
Sizes available from ( 1500~2500 )mm by ( 2400~8000)mm.
|
|
Ideal for small to medium size applications due to a variety of station designs; material delivery to automatic saw(s)
-Heights from 3 to 8 m
-Up to 24 picks/hour
-Loads up to 1,2 tons/cassette
-Utilization of customer’s own cassettes (option)
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
