|
|
INTERTEC cabinets and shelters are designed as sandwich constructions with inner and outer skins made from very strong GRP skins - or other materials such as aluminium sheet or stainless steel - and a core of closed cell light weight and insulating PU foam. This construction ensures high strength and rigidity and is unaffected by environmental influences.
The design spectrum covers nearly every application case, from an insulated cable distribution cabinet through Analyser House or Radar Equipment Shelter to a complete - even multi-storey - utility building with attached office. Whether in aggressive industrial atmosphere or extreme environmental conditions of the arctic or the desert - there are nearly no limits.
|
|
|
|
|
|
FlexiStore
Divide off or enclose. Build new, modify or expand. The needs can differ in your industry or in your warehouse. However, if you choose Axelent FlexiStore you can rest assured since this warehouse partitioning system offers almost unlimited potential in the way the various elements can be combined and used. At the same time, you gain a versatile, safe and economical system, characteristics that apply to all Axelent products.
The FlexiStore panels are available in three heights and numerous widths. Using feet, uprights and extensions, you can then adapt your warehouse partitioning system to suit your particular needs. If you require a special solution, then we can also offer a cutting service to tailor your industrial or storeroom mesh walls to fit precise horizontal or vertical dimensions. You can also combine FlexiStore with any of our door packages. If you want a special colour adapted to other fittings, we can of course arrange this. However, in this case, the same delivery time as for our standard colours is not applicable. Naturally, we supply everything on specially-adapted pallets direct from our own warehouse in Hillerstorp, Sweden.
|
|
|
Mesh and steel industrial partitioning and office partitioning to create working areas throughout your business.
|
|
|
TMI, LLC (Trading & Manufacturing Industries) headquartered in Pittsburgh, Pennsylvania has a Save-T partition to fix any need; protection of employees and goods from adverse environmental conditions such as noise, heat, cold, humidity, dust, and drafts. TMI has the largest stock of different sizes and thicknesses of flexible PVC in the United States to chose from to construct your partition; safety orange, blackout, weld screen, low-temperature, ribbed, insulated, anti-static, and standard clear, to name a few. A variety of configurations are possible between curtains and stand alone partitions. Curtains can be wall mounted, ceiling mounted, chain mounted, threaded rod mounted, pipe staff mounted. Modular enclosure partitions can be 2, 3, or 4 sided. The hardware comes standard in galvanized but stainless steel is also available. Each project is custom made to your specifications. Our design experts can help you with your problem area. We also manufacture custom strip doors.
|
|
FlexiStore Plastic & Sheet metal
Axelent’s plastic and sheet metal system also belongs to the FlexiStore group of products. The versatility of our systems means that you can combine plastic, sheet metal and mesh according to your particular requirements. To avoid gaps between the different panels, we recommend that you use our specially adapted sheet metal strip.
This is a system that is easy to assemble and which gives you the possibility to use the same posts and door packages as for our other mesh wall products. The plastic and sheet metal panels are available in two heights: 1100 and 2200 mm, as well as in four standard widths. Axelent’s FlexiStore plastic and sheet metal systems ideally suit warehouses that require versatile view protection or, for example, around an aerosol warehouse. Everything is delivered carefully wrapped on specially-adapted pallets direct from our own warehouse in Hillerstorp, Sweden.
|
|
|
The PD19 ® brand of wire deck is the only wire deck manufactured in the USA by a leading pallet rack manufacturer, Husky ® Corp. This means you get a wire deck engineered to fit right and meet the performance demands of professional material handlers. Made from six gauge steel using stringent quality control procedures, PD19 ® is the solution for both new and existing pallet rack systems. Numerous designs are available for a variety of capacity and application needs that cover all aspects of both manufacturing and distribution. Installs quickly with no tools and is an excellent choice for facilities with sprinkler systems. Meets all fire and safety regulations. When buying Husky ® rack, save time and money by leveraging the installation advantages of all of your rack system arriving on the same truck under one freight bill. Buy PD19 ®, the quality name in wire deck.
|
|
Monobloc full mesh panel
Modules of 500, 1000, 1500
Stabilising base dowelled to the floor
Delivered as kit or installed by us
|
|
Monobloc panel: solid, mesh or glazed factory panel
Modules of 1000 and 1200 allowing positioning of preferred door
Assembled by wedged keying system
Stabilising base dowelled to the floor
Easy installation
Delivered as kit or installed by us
Available colours: Panel and door: RAL 9016
Upright and stiffener: as per SIC colour chart
|
|
| ... products without technical information |
| |
|
|
|
|
Mapei's products, adhesives and chemical products for building contribute to the quality of life of whoever chooses the Mapei brand, enhancing the aesthetic beauty, the comfort and the safety of the environment in which we live. In fact, Mapei's products are everywhere in our homes, underneath our floors, in concrete pillars or in historic buildings, reinforcements which are often invisible, but nevertheless inseparable from the elements which they bind together with their adhesive strength. As well as solidity and stability, the vast range of performance characteristics and colours which many of the products offer are potentially a source of assistance and inspiration for architects and project planners as they seek to create ever more attractive and more secure structures.
Mapei's product portfolio is divided into the following categories: Adhesives for floors, ceramics and natural stoneware ; Grouts and elastic sealants ; Adhesives for resilient, wood and textile floor and wall coverings ; Products for the preparation of all substrates for building ; Special hydraulic binders ; Pre-blended mortars and special products for the recovery of concrete structures ; Mortars and binders for the recovery of stone masonry ; Additives for mortars and concretes ; Waterproofing compounds and anti-humidity agents ; Soundproofing systems ; Smoothing agents and protective compounds for outside walls ; Polystyrene foam heat insulation systems.
|
|
|
|
|
|
Our cabling systems may be divided into two groups according to their field of application:
Systems for building installation:
ecobus power 5x10 mm²
The system for building automation. Both power current lines 5x2,5 mm² and bus lines 2x1,5 mm² with twin shielding are combined in one sheath. This means that the bus lines must not be interrupted any more for connecting devices - a principle, that was only used for power current lines until now. Thanks to ecobus combi, the bus installation requires a minimum of wiring works. Due to the decentralized repartition of the bus devices, the structure of the installation suits perfectly every type of requirements.
ecobus combi 5x2,5 mm² 2x1,5 mm²
ecobus power 5x2,5 mm²
ecobus data 2x1.5 mm²
multibus 4x1,5 mm²
ecoline-p3 3x2,5 mm²
Systems for industrial application:
ecofil i 5x16 mm²
ecofil i 7x2,5 mm²
Industrial appliances nowadays reach a high flexibility thanks to bus systems and control devices. To allow easy implementation and maintenance works, the applicances often have a modular structure which has already been determined during planning. The ecofil i 7x2.5 system perfectly suits appliances which have to be easy to modify and where power current and weak current have to be supplied in an easy and secure way. Thanks to this system, the T-pieces which are commonly liable to breakdowns and which are usually necessary for the branching of round cables can be avoided.
|
|
|
|
|
|
EE16 transmitters are the ideal solution for accurate measurement of relative humidity and temperature at a reasonable price in HVAC applications.The well proven E+E humidity sensor in combination with the new designed electronics guarantees excellent long term stability and resistance against chemical pollutants. EE16 transmitters are available as wall or duct mounted, with current or voltage output signals.
Technical data
Measuring range: 10-95% RH; 0...50 °C
Outputs: 0-10V or 4-20mA
Accuracy: +/-3% RH; +/-0.5 °C
Supply: 24V AC/DC
Transmitters of the EE21 series have been developed for high-precision measurement of relative humidity and temperature. EE21 transmitters are available for wall and duct mounting with or without the very useful
snap in-mounting kit, which allows a quick and easy exchange of the transmitter.
Outputs can be selected between voltage and current. An optional radiation shield providing a forced ventilation is recommended for use in outdoor applications.
Special protection coating for the sensing element permits the permanent use in very pollutedenvironments.
Technical data
Measuring range: 0...100% RH; -20...60 °C
Outputs: 0...1/5/10V or 4...20mA
Accuracy: +/-2% RH; +/-0.3 °C
Supply: 24V AC/DC
|
|
The small drive with the great advantages.
A light, convenient beginner drive with 14kW power.
-Ergonomic: clearly laid out, arranged operator elements.
-Super easy to manage: motor removable for transport.
-Also for 16 A current: change over button.
-Simple handling.
-Can be operated on 16A and 32A current.
|
|
INFLATABLE SHELTERS
For intensive traffic applications with vehicles
of different sizes.
MECHANICAL DOCK SHELTERS
For quite intensive traffic applications with vehicles
of varying sizes and models.
CUSHION SEAL
For quite intensive traffic applications with vehicles
of similar sizes.
|
|
In order to effectively compensate for the difference in size between the loading bay door and the vehicle, Loading Systems supplies the PowerShelter dock shelters.
When the PowerShelter dock shelter is used variations in internal climate are reduced, which is in the interest of the stored goods. Furthermore, employees are protected from draught or extreme temperature fluctuations. The PowerShelter dock shelters have the ability to reduce the energy consumption in warehouses and to limit the absence of employees through illness.
|
|
Tretight® is an inflatable dock seal that is used between a vehicle and a building to protect the interior environment from external contamination. Tretight® creates a better working environment, saves energy and protects against dust and dirt.
Tretight Dock sealsThe design does not involve metal cladding, which can be damaged by the vehicle, and consequently, Tretight® has a long life span.
|
|
Dock Shelter
EP Dock shelter DET-F with fixed frame
This type is manufactured with galvanized framing, providing improved durability. It can accornmodate a wide variety of trailer sizes while providing full, unimpeded access to the back of the trailer.
FEATURES
- The top panel has a slope for drainage
- Roll-formed galvanized steel framing
- High-visibility guide stripes assist drivers with proper positioning of trailer
- Steel supports protect frame from off-center trailers
|
|
TrellTent® is a versatile and rapidly deployable inflatable tent and shelter system. It is perfect for rescue and medical services when sheltered premises are needed for treating injured people.
TrellTent® is light weight, takes up little space when not in use and it takes only a few minutes to raise.
The various TrellTent® versions are adapted to specific needs, both military and civil operations. The standard version can be connected together to form larger units, such as a field hospital.
|
|
Ground Isothermal Portal
The model KDT ground isothermal portal is recommended in particular to seal off ground-level loading bays equipped or not with elevator platforms, with limited maneuver space and requiring the removal of the structure to allow for the transit of vehicles.
This portal is provided in all its versions with a canvas front reinforced with harmonic steel springs and single-piece PVC plates and, if the loading bay is equipped with an external elevator platform, the portal can be built with a length suitable to contain this equipment thus making it possible to work with any type of weather.These structural features reflect our stringent quality standards: retractable hot-galvanized steel structure to prevent damage by the vehicle and class 2 self-extinguishing PVC/polyester canvas.
|
|
|
Built with Frommelt's signature quality, Genisys™ GDS dock seals provide a tight seal for high energy efficiency and a more comfortable working environment.
|
|
Recommended in particular for the sealing of the loading entrances of refrigerated warehouses because the inflatable pads fit perfectly to the edges of the vehicle being loaded thus preventing costly heat exchange between the warehouse and the outside environment.
Thanks to its intrinsic features, it is suitable for a wide array of vehicles of all sizes.This portal does not convey the thrust of the vehicle being loaded against the warehouse structure.
|
|
| ... products without technical information |
| |
|
|