|
|
MasterGuard
MasterGuard is an accident prevention mesh wall that is in a class of its own in terms of quality, safety and design. The entire system has been designed to create as safe a workplace as possible, even in the toughest environments. The basic element is a closely spaced mesh where we, in the latest version, have further increased safety by reducing the holes in the mesh to cc 51 x 21 mm. The required safety distance is 120 mm, which facilitates assembly in close proximity to moving parts, something that also saves expensive production areas.
MasterGuard is available in height 2200 mm and can be combined with all our other accident prevention systems, even with plastic and sheet metal walls. MasterGuard is available in several different standard sizes and is delivered wrapped on special pallets directly from our stores in Hillerstorp, Sweden.
|
|
|
|
|
|
FlexiGuard
Build new, modify or expand. And do so simply, safely and economically with Axelent FlexiGuard – the accident prevention mesh wall that offers almost unlimited potential in the way that the elements can be combined and used. With a mesh aperture of cc 51 x 31 mm, FlexiGuard not only provides very safe shielding, but also means that you can reduce the safety distance to moving parts to as little as 200 mm, thereby saving space. The FlexiGuard panels are available in three heights (1300, 1900 and 2200 mm) and numerous widths.
We also offer a cutting package so you can ensure that your mesh walls suit precisely your particular needs, both horizontally and vertically. And if you require special plastic or sheet metal panels we have these as well.
Simply add the appropriate door package, lock and accessories to FlexiGuard. The result is a very flexible and highly practical accident prevention mesh wall. Similarly to our other products, FlexiGuard is delivered wrapped on specially-adapted pallets direct from our stores in Hillerstorp, Sweden.
|
|
EasyGuard+
EasyGuard+ is the right choice when you are looking for a cost effective system that is easy to assemble.
This system is compatible with Axelent’s other guarding and storage ranges. The standard doors for EasyGuard+ are sliding door with maximum width 1400 and 2900 mm, hinge door and double hinge door. These can be used with X-Lock or Snap lock. Remaining FlexiGuard doors can be used together with EasyGuard+. In these cases you have to use 50x50 mm posts at the sides of the door, together with FlexiGuard door section (20x30 mm frame).
EasyGuard+ offers easier assembly of the foot, compared to other systems. When assembling, three different posts can be used (300, 1200 or 2300 mm), these will be mounted behind the panels. You can achieve a cheaper solution by mixing high and low posts. It is not recommended only to use the low posts (300 mm).
|
|
|
Corrugated Mesh and Steel Mesh are particularly suitable for guards, enclosures and partitioning in conjunction with Clamp Profiles.
|
|
|
|
|
|
FlexiStore
Divide off or enclose. Build new, modify or expand. The needs can differ in your industry or in your warehouse. However, if you choose Axelent FlexiStore you can rest assured since this warehouse partitioning system offers almost unlimited potential in the way the various elements can be combined and used. At the same time, you gain a versatile, safe and economical system, characteristics that apply to all Axelent products.
The FlexiStore panels are available in three heights and numerous widths. Using feet, uprights and extensions, you can then adapt your warehouse partitioning system to suit your particular needs. If you require a special solution, then we can also offer a cutting service to tailor your industrial or storeroom mesh walls to fit precise horizontal or vertical dimensions. You can also combine FlexiStore with any of our door packages. If you want a special colour adapted to other fittings, we can of course arrange this. However, in this case, the same delivery time as for our standard colours is not applicable. Naturally, we supply everything on specially-adapted pallets direct from our own warehouse in Hillerstorp, Sweden.
|
|
In industry, it is advisable to make safe production zones described as dangerous.
AE&T provides the protection of safety zones using robust latticed panels standard and adjusted then with the good dimension, by panels to measure.
Doors sliding hinges or protected by locking mechanisms or n-key rollovers associated with relays with safety supplement the unit.
AE&T offers a wide range of components of safety for these latticed guards:
- switches of safety to pins, levers or magnetic for the machines without inertia
- n-key rollovers with key or by electromagnet for the machines with inertia
- relay of safety category 2,3 or 4 for the monitoring of the emergency stops, the n-key rollover and locking mechanisms.
Latticed guards AE&T, equipped with components of safety are very easy to install and allow to delimit all types of danger zones in periphery of the machines presenting a body risk for the workers: cells of robotization, palletizers, machines of cutting or folding, conveyers...
|
|
|
The PD19 ® brand of wire deck is the only wire deck manufactured in the USA by a leading pallet rack manufacturer, Husky ® Corp. This means you get a wire deck engineered to fit right and meet the performance demands of professional material handlers. Made from six gauge steel using stringent quality control procedures, PD19 ® is the solution for both new and existing pallet rack systems. Numerous designs are available for a variety of capacity and application needs that cover all aspects of both manufacturing and distribution. Installs quickly with no tools and is an excellent choice for facilities with sprinkler systems. Meets all fire and safety regulations. When buying Husky ® rack, save time and money by leveraging the installation advantages of all of your rack system arriving on the same truck under one freight bill. Buy PD19 ®, the quality name in wire deck.
|
|
Monobloc full mesh panel
Modules of 500, 1000, 1500
Stabilising base dowelled to the floor
Delivered as kit or installed by us
|
|
| ... products without technical information |
| |
Heli-Coil® inserts are precision formed screw thread coils of stainless steel wire having a diamond shaped cross section.
When they are installed into Heli-Coil® tapped holes, they provide permanent conventional 60' internal screw threads that accommodate any standard bolt or screw.
All related tooling such as STI Taps, hand and power installation tools, gages and tang break-off tools are also available. Typical Applications would include: Automotive,Communication, Aerospace, Military and the Defense industries
|
|
This self-locking series corresponds in all points to the conventional series, the screw threads being locked by polygonal deformation of one or more turns of the thread.
This deformation results in a powerful locking on the sides of the screw thread and counteracts the unscrewing effects of dynamic stresses, vibrations and thermal loads. The locking torques obtained are comparable with the values indicated in standard ISO 2320.
The stainless steel self-locking thread insert is recognised by its red colour.
|
|
Because of its optimal dimensions, the SR series keeps all the characteristics of the conventional series while offering additional advantages for installation and use:
- Easier and safer installation for higher productivity,
- 100% compatible with the existing tools of the conventional series, it allows adopting this new series without changing the habits of buyers and users,
- More economical to buy, the SR installation tool has new user-friendly features which make it quicker to use and allows a self-check.
|
|
Recoil strip feed inserts provide many advantages such as:
Minimised handling costs
Faster, more economical assembly
Positive inventory control
Recoil 'Strip-Feed' inserts are available in most common thread diameters and lengths in addition to the various surface finishes which are available on standard Recoil bulk inserts
|
|
|
|
|
|
SR series: additional advantages
Because of its optimal dimensions, the SR series keeps all the characteristics of the conventional series while offering additional advantages for installation and use:
Easier and safer installation for higher productivity,
100% compatible with the existing tools of the conventional series, it allows adopting this new series without changing the habits of buyers and users,
More economical to buy, the SR installation tool has new user-friendly features which make it quicker to use and allows a self-check.
Amecoil locking thread inserts
This self-locking series corresponds in all points to the conventional series, the screw threads being locked by polygonal deformation of one or more turns of the thread.
This deformation results in a powerful locking on the sides of the screw thread and counteracts the unscrewing effects of dynamic stresses, vibrations and thermal loads. The locking torques obtained are comparable with the values indicated in standard ISO 2320.
The stainless steel self-locking thread insert is recognised by its red colour.
|
|
|
Because of its optimal dimensions, the SR series keeps all the characteristics of the conventional series while offering additional advantages for installation and use: Easier and safer installation for higher productivity; 100% compatible with the existing tools of the conventional series, it allows adopting this new series without changing the habits of buyers and users ; More economical to buy, the SR installation tool has new user-friendly features which make it quicker to use and allows a self-check.
|
|
Thread technology for HELICOIL® plus, HELICOIL® tangless, KOBSERT® and QUICKSERT®
For metals with low shear resistance, Böllhoff offers an outstanding solution for thread reinforcement: HELICOIL® plus and HELICOIL® tangless thread inserts ensure high-strength, non-wearing, thermally loadable, high-precision threads.
These thread inserts are also suitable for waste recycling and repair of inside threads.
Böllhoff offers corresponding fitting solutions, from handheld fitting tools to fully automatic fitting machines for mass production.
Supplemental to this, there are QUICKSERT® threaded bushings for expansion anchoring and KOBSERT® threaded bushing that is specially tailored to air (gas) and water-tight connections.
|
|
The Recoil system consists of precision inserts, quality HSS STI taps, cost effective repair kits and easy to use installation tools which are used for repairing damaged screw threads or creating strong new threads. Available in free running, locking and strip-feed configuration, they are generally manufactured in 304 stainless steel, but also available in Inconel, Nimonic 90, Nitronic 60, Phosphor Bronze, type 316 Stainless steel or with lubrificants and specific coatings and colors.
They are available in all Metric and Imperial sizes, including UNC, UNF, BSC, BSW, BSP, BSF, BA, NPT and ISO.
|
|
Range supplements thread inserts at Norelem.
These thread inserts of Norelem are average a rapid, effective and economic to restore tappings torn off, damaged or seized up. The quality of completion makes it possible to guarantee a high gripping force of the screws. The versions stainless and chromium-nickel are corrosion resistant in moist environment and acid. Practical, the assembly of the thread inserts is fast and easy because apart from the tool for assembly, no special tool is necessary; the keys are used as brake in rotation during the assembly. They are available of M8 to M24, (starting from M4 for references 07661 and 07664).
|
|
| ... products without technical information |
| |
... see all the products in the category
Inserts
|
|
|
see the results for the following category : 
