|
|
PC 4650.000 with keyboard drawer
- Lock insert, lock no. 3524 E
- Swing-down front for handrest
- Mousepad support (also suitable for IP 67 mouse), may optionally be used on the left or right
- Hinged cable support
PC 4650.704 with desk section
- Cover plate top and bottom
- Designer strip made from plastic approved for use with foodstuffs
Material:
Stainless steel 1.4301
Enclosure: 10-fold profiled, 1.8 mm
Rear door: 2.0 mm
Gland plates: 1.5 mm
Monitor field with single-pane safety glass for screen diagonal 482.6 mm (19).
Surface finish:
Brushed, grain 240
Protection category
IP 55 to EN 60 529, NEMA 12 is met.
|
|
The WMC-1004 is a full-length shoe-box wallmount industrial chassis for both SBC's (8-10 slot backplanes) and micro ATX motherboard. Its two-story modular design allows convenient installation of CPU boards and drivers while keeping the size of the chassis compact. Within its heavy-duty steel construction, it is equipped with two 5.25", one external 3.5" and one internal 3.5" drive bays for basic system requirements. To further enhance the unique design of the WMC-1004, (2) 9cm ball-bearing fans have been allocated especially for the CPU board to maintain the integrity of the higher speed processors. The WMC-1004 offers an ideal solution for computers in public areas or mobile computers where size is one of the main concerns.
Features:
Heavy duty steel construction shoebox industrial chassis can be mounted vertically or horizontally.
Two 5.25" and two 3.5" drive bays (one hidden).
Two 9 cm ball bearing fans with replaceable air-filter and one 8cm ball bearing fan.
Supports 8-10 slot backplane or micro-ATX
motherboard.
Supports PS/2 power supply
|
|
|
The range PAC is intended for difficult environments. This range can accept up to 8 cards (short or long) ISA, PCI, or PCIe. Products of this range have a systeme of blockage for every card and a filter with removable air for easy maintenance.Thanks to conectors, this PC could be defined according to your needs.
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
Stainless steel cabinets are used in both corrosive and food processing environments. ARETA has been manufactured in stainless steel without changing its design structure or its accessories, thus providing all the benefits offered by the standard painted version.
The clean external finish gives the product an aesthetically very pleasant and highly professional appearance.
|
|
CID 200 OUTDOOR CABINET - PREMIUM QUALITY PRODUCT
Frame made of extruided aluminium profile. Modular design and manufacturing. Protection level up to IP55, High capacity of heat dissipation. Versatility. High quality and technologi proved and supplied during several years.
Applications: Cabinets for fixed telephone and ADSL; to host active equipment with system of autodissipation heat; to host security control systems equipment; for Energy, solution systems, for mobile phone network.
|
|
NEMO 300: UNDERGROUND CONTAINER FOR ACTIVE EQUIPMENT
PATENTED SYSTEM. Adequate to host active electronic and telecommunicatioN equipment. Strong construction. Cover according to UNE-124 D400. Installed equipment security guaranteed. IP-67. Easy access to the equipment from all the container. Heat evacuation through ground conducts.
|
|
MicroTCA is complementary to PICMG3.0 ATCA. Where AdvancedTCA is optimized for very high capacity and high performance applications, MicroTCA is designed to address cost sensitive and physically smaller applications with lower capacity, performance, and perhaps less stringent availability requirements. MicroTCA preserves many of the important philosophies of AdvancedTCA, including basic interconnect topologies and management structure.
|
|
The new dimension at the interface between man and machine for enhanced
- workspace
- safety
- ergonomics.
Industrial Workstations are more than just combinations of individual components. Individual customer requirements are achieved cost-effectively and to perfection.
Examples include compact solutions for scanner or laboratory workstations, individual worktops, combinations with the AP console system or Command Panel - there are virtually no limits to your creativity.
The concept is convincing because it is so simple: IW modules are equipped with climate control and electronic components, centralised security controlling, plus an extensive range of accessories, for a complete solution.
Perfect solutions from a single source. We develop and manufacture according to the principles of ergonomics and safety engineering.
|
|
Standard PCs are increasingly used as control systems for machines, complex plants and installations. Protecting the main PC unit and the peripherals, e.g. printer and keyboard, from illegitimate access and from sources of pollution is the purpose of the PC Enclosure range. These systems conform to common safety requirements and provide the standard of easy and comfortable operation that has come to be expected. They also feature a range of concepts for heat dissipation.
- powder coated RAL 7032, front doors painted 7023
- robust industrial design
- complete pre-installation (ready for use upon delivery)
- front with three compartments, full-size door on back
- roof plate screwed tight (optionally raised, meeting IP 23)
- two-part bottom gland plate, 1/3 and 2/3, with patented rubber profiles for cable entry
- two mounted device carrier plates included in standard supply
- one pair of side panels also pre-installed
- multiple cable entry options
- appealing design
|
|
Intel Server Chassis are designed and validated for easy, cost-effective integration with Intel Server Boards. A full line-up of pedestal and rack-optimized chassis are available to meet your customers' diverse needs.
Intel Server Chassis SR1500 is a performance 1U rack-mount chassis. Feature set supports the high-density server market
with: improved serviceability, accessory kits allowing
for configuration options and Intel Cable Reduction Technology that simplifies server infrastructure by eliminating cables to support up to three hot-swappable SAS (Serial Attach-SCSI) or SATA (Serial ATA) hard drives and one slim-line optical device.
The Intel Server Chassis SR2500 features integrated manageability with upgrade options including flexible drive configurations - up to 6 SAS or SATA HDDs or 5 drives plus tape and SAS RAID options which increases data protection and HDD I/O performance. Intel Server Chassis SR2500 is designed for increased uptime and tool free serviceability.
The Intel Server Chassis SC5400 offers an ideal solution for a variety of business environments. With great reliability, wide-ranging scalability, strong manageability, the SC5400 is a solid, cost-effective solution for a range of environments, from small businesses to database servers. The SC5400 chassis family supports SAS, SATA and SCSI drives for configuration and application flexibility. Applications needing maximum reliability, serviceability and uptime can benefit from the SC5400LXI SKU, which integrates fully redundant hot-swap power supplies and fans, and support for 6-drive hot-swap SAS/SATA drives.
|
|
Are you looking for a file cabinet that offers greater flexibility? Are you thinking of a lateral file cabinet for extra storage space? What would you say about a file cabinet that offers even more? The multi-purpose cabinet is your solution.
Montel offers a complete range of storage and file cabinets for all types of material. The cabinets include accessories making various configurations possible, sure to satisfy your most particular needs.
The cabinet may be purchased with a lock providing a secure storage solution for your personal items or confidential documents (client files, patient records, accounting statements, etc.).
Ideal for office, institutional and industrial applications, Montels multi-purpose cabinets are indeed multi-purpose and practical.
|
|
The handling and conservation of rolls of textiles require flexible, large capacity storage systems.
The cantilever shelving system from Montel is designed to store various lengths of rolls, maximize the use of available space and facilitate handling.
Montel can also provide cabinets that recreate the microclimate needed for storing fragile items and valuable collections (ventilation slots, trays and windows on the doors).
|
|
CARDMASTER range is ideal for packaging instrumentation, measurement, monitoring and process control equipment. It provides two compartments - one for circuit boards and sensors with slots for printed circuit board insertion, and another one for terminal and wiring. All sizes are available in both polycarbonate and ABS.
Dimensions range from 166*160*80 mm to 390*316*167 mm.
PC: IP 65; IK 07/08; NEMA Type 1, 4, 4X, 12 and 13; UL 94-5V; UL 508
ABS: IP 65; IK 07; NEMA Type 1, 4, 4X, 12 and 13; UL 94-HB
|
|
Geotest's offers a large selection of PC, 3U and 6U PXI instrumentation chassis allowing test engineers to design system configurations specifically for automatic test equipment (ATE) systems, data acquisition, process control applications, and other industrial applications that require PC-based and PXI-based instrumentation.
|
|
|
A 3U-high chassis which houses up to eight PC Blades. Each Cage is a self-contained unit that provides all of the Ethernet connections, airflow management, and power required by the Blades. Up to 14 Cages (112 Blades) can be mounted in a standard 6' rack. A BackPack connects directly to the back of each Cage, and PC Blades slide in the front.
|
|
Logstrup can provide a full customisation service to customer specification in painted or stainless steel.
The design departments in Denmark and Ireland have the ability to take a project from a concept stage to 3-D model, prototype and full production in a very short period of time.
This is facilitated by the use of the latest 3-D technology for drafting and modelling. Full CAD-CAM links to punching and bending work centres ensures fast reliable production of prototypes and volume production.
The company is currently a major supplier of marine bridge desks for primary navigation and ship management. These have been installed in some of the biggest commercial and private ships in the world.
|
|
Highlights
1Gb PICMG 2.16 platforms
Easier integration - bring solutions to market faster
Comprehensive shelf management throughout platforms
Flexibility and scalability, maximizing reuse
Targeted at high availability and standard applications
Wide range of interoperable blade functionality
- Single Board Computers
- I/O & Communication
- Media & Voice Processing
- Storage
- Embedded SS7 & SS7/IP
- Carrier Blades
|
|
| ... products without technical information |
| |
|
|