|
|
| Logstrup can supply customised 19" rack solutions to suit all requirements. Heights, depths and widths are infinitely variable due to the three dimensional design of the Logstrup system. Racks can be designed in an open framework system to give total freedom of access or fitted with doors and plates to provide safety, security and a pleasing aesthetic finish. |
|
Eldon's Upgraded Floor Standing ElRack Patch and Server Rack Series
ElRack just got better! Not only is the "one-rack-solution" to providing a variety of different mounting possibilities a real winner with the industry, but now with the newly released accessories available, ElRack truly becomes a real trend setter! Whether you need 19", 23", 24" or ETSI (metric) requirements, the ElRack%uFFFD copes with all sizes, as standard.
Dimensions available:
H: height from 21U (1000mm) to 48U (2200mm),
W: width 600mm, 800mm and 900mm,
D: depth 600mm, 800mm, 900mm, 1000mm and 1200mm.
The Elbox wall mounting range
Boasting a fresh, appealing design, the new ElBox patch box comes in 400mm, 500mm and 600 mm deep versions. While both the 400mm and the 500mm will be supplied as knock-down or flat-pack versions, the 600 mm deep model will be delivered pre-mounted at the factory. |
|
Due to the hardness of the material, we recommend using metal multi-tooth screw
SZ 2486.300 for the interior installation.
Rittal Service:
TS stainless steel (1.4301) available in protection category NEMA 4x on request – please add extension .640 to the Model No.
Material / Surface finish
Material:
Stainless steel 1.4301:
Enclosure frame, roof, rear panel and gland plates: 1.5 mm
Door(s): 2.0 mm
Mounting plate: 3.0 mm sheet steel
Surface finish:
Enclosure frame and gland plates: Bare
Door, roof and rear panel: Brushed on the outside,
grain size 240
Mounting plate: Zinc-plated
Supply includes
Enclosure frame with door(s), mounting plate, gland plates, rear panel and roof, 2 support strips fitted in the enclosure depth (only with depth 600 mm).
Protection category
IP 55 to EN 60 529/10.91, NEMA 12 is met.
|
|
Eta offers a number of RACK solutions to satisfy a majority of applications including:
19" swinging frames
19" fixed frames
19" rails
Double Hinge Boxes (CR)
- Swinging frames with solid rotation hinges are manufactured from sheet steel and offer outstanding strength and versatility. The rotation direction is reversible (left-right) and the opening angle varies according to cabinet width.
- Fixed frames are applied directly on the cabinet framework. Only for cabinet with 600 width.
- CR Box (Double Hinge)
CR Boxes have two sections. The central section is used for mounting 19" components whilst the rear section with mounting plate, can be used for assembling standard components. The front with silk-screened security glass offers excellent visibility and aesthetic. Door can be mounted left or right. |
|
- Vertical masts, internal uprights and anchoring cross-beams in metal sheet steel, 2mm. thickness, upper and lower base 1,5mm. thickness, painted in RAL 7035 (smooth finishing)
- Tempered glass door according to UNI 7142 -(88) norm
- Rapidly removable side panels in pre-painted RAL 7035 sheet steel and protected by a key lock
- Ventilation flutes on both upper and lower areas
- Roof equipped to accept forced-air ventilation unit
- Possibility to install a second pair of 19" frames in the rear position
- Roof and base equipped with cable entry holes with sliding covers
- Ready for ground wiring
- IEC borings on 19" frame
- IP 20 protection degree according to EN 60529 norm |
|
| Logstrup can supply customised 19" rack solutions to suit all requirements. Heights, depths and widths are infinitely variable due to the three dimensional design of the Logstrup system. Racks can be designed in an open framework system to give total freedom of access or fitted with doors and plates to provide safety, security and a pleasing aesthetic finish. |
|
The Rosenberger-OSI „Data-Center-Rack“ has been developed especially for FO patch distributors in data centers. In data centers the requirement for highest density becomes increasingly more important than in other cabling areas. To lead the through the very high density emerging large cable volumes professional and appropriate away from the patch fields, new cable management solutions are needed.
Advantages:
- installation of single data racks
- module system
- variable side wall and rear wall doors concept
- cable management system
- accessories
|
|
Features:
* Pre-assembled structure in aluminium.
* Quick mounting with 8 ¼ turn bolts.
*Accessibility from 4 sides.
* Flat pack packaging that reduces the transportation and stock cost.
*Absolutely reversible structure.
* Springswivel system which allows fast an easy assembly/ disassembly and changing of the opening direction without any tool.
* Standard option to customise the rack using different corner cap colours.
* Vertical and horizontal stock options.
* Easy installation and assembly in places with difficult access. |
|
| The new Internorm Stil desktop enclosure system is the innovative enclosure solution for the 19" sector. All space-optimised versions are based on the Interzoll module mounting rack programme and offer excellent value for money. Different front elements give the Internorm Stil its own individual and functional design. The enclosure variant with integrated ventilation (2 x 1/2 U) provides increased heat dissipation and is one rack unit higher on the outside. All standard models offer good EMC screening, which can be increased even further by the use of additional components. |
|
Dimensions acc. to IEC 60297 or IEEE 1101.1, Aluminum or sheet steel versions, up to superior EMC level. Large selection of assembly options.
|
|
The RCK-606/608 6U Rackmount Chassis was specially designed for Computer Telephony Integration (CTI) and for fault tolerant server applications. The chassis provides two drive bays combination for different applications. RCK-606 supports four 5.25” + two 3.5” drive bays and RCK-608 supports two 5.25” + six 3.5” drive bays, suitable for RAID related applications. The combination of roomy space, separation of system boards and power supply plus three powerful 120mm fans ensures high reliability for any heat sensitive applications. Detachable card cage offer integrators the ease of installation and maintenance.
Features
• Standard 6U 19” Rackmount Chassis.
• Front Panel with Lockable Doors to Protect Drives
• Two drives combinations : (4) 5.25” & (2) 3.5” or (2) 5.25” & (6) 3.5” drive bays for different applications.
• Replaceable rear panel to support either backplane or ATX motherboard.
• Replaceable power supply bracket to support both standard PS/2, dual PS/2 redundant power supplies.
• Detachable card cage for easy installations and maintenance. |
|
EIA RS-310C 19" Rackmount Standard 4U height
Heavy Duty Steel with Ni plating
(10) 3.5" HDD and (3) 5.25" Drive Bays
Supports mini-redundant or PS/2 power supply
(1) 80mm and (3) 120mm high speed ball-bearing fans
|
|
Features
EIA RS-310C 19" Rackmount Standard
Heavy duty Ni-plated steel, Black or Beige
Supports Full or Half-Size SBC
PICMG Backplane with optional 2 or 4 PCI slots for Expansion
(1) 5.25"/(1) 3.5" FDD/(1) 3.5" HDD
Lockable Front Door and Replaceable Air Filter
(2) 80cm Replaceable High-speed Ball Bearing Fans for Better Ventilation
300W/400W ATX Auto-switch Power Supply
Specifications
Construction Heavy-Duty Steel with Ni Plating
Color Black or Beige
Board Support Full or Half Size PIII/PIV Single Board Computer
Drive Bays (1) 5.25" (1) 3.5" FDD (1) 3.5" HDD
Expansion PICMG butterfly backplane with optional 2 or 4 PCI slots
Power Supply 300W/400W PS/2 ATX power supply (PFC optional)
Cooling (2) 80cm Ball Bearing Fans and replaceable air filter
Keyboard/Mouse Ports (1) PS/2 Keyboard/Mouse Port on Front Panel
Switch On/Off Switch; Touch-Free Reset Switch
Dimensions 430 mm(W) x 450mm(D) x 88 mm(H) / 16.69 x 17.7 x 3.5
Gross Weight 12.5 kgs /27.5 lbs |
|
A complete offer of chassis will cover all needs:
Industrial Rack Mount Chassis 4, 8, 14 or 20 slots with different combinations ISA/PCI.
Industrial Rack Mount Chassis with different height: 1U, 2U, 4U, 5U, 6U or 8U. Available with LCD screen
POwer supply 150W in 500W AT / ATX / AT-
Function PFC - verbose power supply- Power supply " hot-swappable ",... Chassis with tolerance of breakdown,control of machines, control of temperature, indicators of states in front panel, management of aeration,...
|
|
europacPRO
- 19’’ subrack
- With high flexibility
- EMC shielding can be retrofitted
- Fully IEEE 1101.1 compatible
europac integral
- Subrack with integrated functions
- Simple assembly
- Cost effective alternative for high quantities
multipacPRO
- 19" chassis for horizontal board installation and non-standardized components
- Versions in aluminium or sheet steel
inpac
- 19" chassis with high mechanical stability
- Modular design for standardised board formats
- Front and rear frame Al die cast frame Al die cast
|
|
SYSTEM-90E base racks are designed as 19'' subracks for mounting various modules. All racks are suitable for wall mounting. They are powered by 24 VDC, which simplifies the use of SYSTEM-90E in different power-supply systems.
Base racks are available with 5 to 19 slots, thus ensuring a cost efficient solution for various applications |
|
| Investing in the best industrial PC makes no sense if the enclosure is not suitable for use in harsh industrial environments. The racks and enclosures shown on the following pages are optimized for the special conditions of industrial use and ensure the highest degree of safety against external interferences. Our twenty years of experience in developing and producing industrial electronics ensures that you will find the optimum solution for your application. |
|
| Allows quick, easy assembly to the rack, as well as optimum wiring distribution. The new design, attached to the rack with L-shaped pieces that are adjustable for depth, with built-in, take-out panel and distribution base, allows access to the interior of the unit without the need to remove the unit from the rack. |
|
Features:
* Tool-free assembly, accessibility and maintenance.
* Full access from all sides.
* Security. One lock secures all access.
* Internal and external installation helps.
* Design which combines aluminium, steel and thermo-plastics. |
|
With a depth of 1000 mm, these cabinets are suitable also for housing very large servers.
The side panels come with ventilation flutes.
Available for both width 640 and 800 mm.
It is advisable to make use of a front and/or rear door with holes, to ensure adequate heat dispersion.
NEW!
It’s now available the special dimention 600 x 850 - 42 units, specially made for servers and to be positionned on floating floors!
WE ARE LOOKING FOR DISTRIBUTORS AND AGENT IN FREE AREAS, IF YOU ARE INTERESTED CONTACT US |
|
Absolutely new , workable for small and medium offices where you cannot place a standard Server Rack 19" Cabinet due to space.
Dim. 600Lx1000Px650 12 Units
Code : MAGN1062 Colour Black Ral 9005
With this new solution you can solve all space problems in office , can contain also Servers with 800 depth.
This cabinet can be placed or under desk or in a corner of the office without be in the way , with a very nice styling .
Contact us for more information
We are also looking for Distributors and Agent for free areas, if you are interested contact us |
|
| The BackPack plugs into the rear of the Cage and connects the PC Blades to the User Ports and the network. BackPacks, in conjunction with ClearCube software, enable PC Blade sparing and IT administrative control. |
|
|
|
