|
|
|
|
|
|
The XM120 moisture analyzer meets the highest international quality standards. Precisa has developed an instrument which not only provides a high degree of precision, but also offers an outstanding array of additional options. XM120 will fit perfectly into your IT environment and has integrated connections to external PC’s and equipment.
Generous memory capacity, optimum control for measuring processes and state-of-the-art, user-friendly high-end weighing technology are its most impressive features. XM120 works according to the tried and tested infrared drying method, which is distinguished by a wide thermal radiation spectrum. This means that even heavy samples can be analysed accurately.
The XM60 moisture analyzer is the low-volume instrument for customers with low sample volumes and quantities. It is robust, perfectly accurate and simple to operate. Thanks to the high thermal values, it delivers quick and accurate results. Irrespective of your analysis criteria, the widest range of analysis options are at your disposal.
The XM66 delivers rapid moisture results for sewage and waste water treatment plants. The increased weighing range of 310g enables both the use of heavier tare vessels and greater specimen quantities. The moisture analyzer XM66 offers the option to store four weighing results which make it possible to calculate the ash residue after ashing of the specimen has been completed externally.
|
|
|
|
|
|
The MS-70, MX-50, MF-50 and the ML-50 are moisture analyzers that utilize the heating and drying method, which compares the weight of a sample before and after heating and drying. Compared with Karl Fischer analyzers, the MS/MX/MF/ML analyzers are much easier to operate and require a shorter time for measurements. At the same time, they maintain very high repeatability thanks to the incorporation of A&D¡'s Super Hybrid Sensor (SHS) as the weighing sensor.
The Windows Communication Tools, WinCT-Moisture, is provided as standard for the MS and MX (optional for MF and ML). With the RsFig, the MS/MX/MF/ML can display a graph on a PC showing changes in the moisture rate while performing measurements. Moreover, with RsTemp, it is possible to determine the most suitable heating conditions for a given sample in a very short time. Specifically, RsTemp automatically changes the heat applied based on set increments and interval times within a range of 30°C-200°C. Given changes in the moisture rate over time, it can determine the most suitable heating temperature.
Another unique feature is that the MS/MX/MF/ML come standard with Sodium Tartrate Dihydrate. Sodium Tartrate Dihydrate is a chemical material that has a stable moisture content of approx. 15.66%, and is therefore ideal to check for accuracy in order to maintain the reference value of the analyzer.
The moisture content resolution of the MS, MX, MF and the ML is 0.001%, 0.01%, 0.05% and 0.1% respectively. The MS-70 is the leading model and is capable of measurements as precise as those done by a Karl Fischer moisture analyzer.
Please see the Users Handbook for the MS/MX/MF/ML for further details.
|
|
|
Sartorius moisture analysis and systems for water content analysis deliver convincing performance thanks to their exceptionally fast measurement results and exceptional reliability. They offer all the features required for use in fields of application relevant to GLP, GMP and cGMP.
|
|
|
Manually operated chilled mirror devices that meet ASTM D1142. Often referred to as "Bureau of Mines Dew Point Testers" these units are used to measure water and hydrocarbon dew points.
|
|
|
The Promet EExd and Liquidew EExd are complete moisture measurement packages for critical process gas and liquid applications. They are designed with the needs of the customer in mind, providing simplicity of installation, total plant communication integration and high calibration integrity. Each offer single and dual channel moisture measurement with Michell’s exchangeable Ceramic Moisture Sensor technology. The analyser also includes integrated pressure compensation and a bright vacuum fluorescent display with touch screen controls; all within an ATEX and CSA certified flame proof housing, suitable for installation at the process measurement location. A comprehensive range of sample conditioning systems complement Promet EExd and Liquidew EExd, giving the user a complete analyser package that is ready to install and operate.
|
|
|
|
|
|
Condumax II is a fully self-contained hydrocarbon dew-point analyzer for natural gas processing and transmission applications to monitor this critical gas quality parameter. The Condumax II uses the proven "Dark Spot" hydrocarbon dew-point measurement principle taken from the highly successful Condumax instrument. The Condumax II combines a hydrocarbon dew-point cell and water dew-point measurement in the same compact, lightweight and explosion proof EExd enclosure. The Condumax II requires only mains power to operate and provides a continuous local indication of key measurements as well as analogue and digital outputs for remote monitoring.
The Condumax ll has a fully automatic online analysis feature and uses the fundamental cooled mirror principle to operate. It is CSA certified and ATEX approved to Ex II 2 G EExd IIB + H2 T4 for hazardous areas zones 1 and 2. It has a self-cleaning concept and no purge or cooling gas is needed, making it very easy to maintain. Condumax II is designed to be flexible and easy to connect with other equipment and it has a multi-function vacuum fluorescent display as standard. This display shows all the measurement parameters and allows adjustment of certain control parameters and the view of log data. In addition, Condumax II provides two 4-20mA outputs, configurable from the main unit user interface for any combination of measurement parameters.
|
|
For measurement of the water content in solid and pasty samples, the Sartorius Water Detection System 400 is the ideal alternative to classic Karl-Fisher titration. The WDS 400 combines three reference methods – oven drying, coulometry (Karl-Fisher titration) and phosphorous pentoxide into a highly accurate measurement technique. Yet the WDS 400 is also easy to operate without having to have special training and eliminates the need for working with detection reagents, many of which are toxic and expensive.
• Detects water quantities in the trace range
• Selective differentiation among surface and capillary water and water of crystallization
• Operating range from a few ppm to approx. 40% moisture
• 1 µg detection limit
• ± 2% reproducibility of the absolute water content
|
|
|
AMETEK's trace moisture analyzers use our unique quartz-crystal microbalance (QCM) technology or phosphorous pentoxide (P2O5) technology to provide accurate and fast moisture measurements in either ultra high purity semiconductor or industrial process gas streams. The analyzers are available in a variety of rack-mount, weatherproof, and explosion proof packages for monitoring ppmv or ppbv concentrations of moisture.
|
|
|
The IM series is an on-line multi IR wavelength analyzer utilizing the infrared absorption technology for measuring product constituent and/or thickness. Signal processing capabilities are built into the Compact All-In-One detector unit for easy installation and operation. A maximum of 99 calibration curves can be stored into the detector memory for numerous measurement applications. The detector can be used by itself or connected to a PC/plant control system, as both analog and digital outputs are provided. A remote setting display unit, connectable upto 9 detector units, can be used to setup various detector functions and also displays measured values.
|
|
Back-lit LCD graphic display with digit height 20 mm
2 halogen quartz glass heaters 500 W each
10 sample plates included
The last value measured remains on the display unt it is replaced by a new measurement
Application table. Various examples in the user manual
Balance contains memory for automatic sequence of 99 complete drying processes. Per memory location 12 free characters
Weighing in help to a defined target value [g] with adjustable tolerance range 1% - 25% of target value
User guidance step by step in the display. Selectable languages: German, English, Spanish
PC keyboard can be connected
|
|
The QMA2030 is a high-precision, fast responding, laboratory analyzer with automatic calibration, used for trace moisture measurement in high purity industrial gases. The process moisture analyzer is designed to give highly reliable, fast and accurate measurement of moisture content in many industrial pure gases. Using quartz crystal microbalance technology, the QMA2030 combines automatic calibration, using an internal wet reference source, with a touch screen control panel to provide easy operation.
The large LCD display allows live measurement data and system information to always be on view but the QMA 2030 also has a data logging capability that allows trend data to be downloaded to an external USB storage device. On-screen alarms can be set at user defined levels. Alarm contacts, and a 4-20mA analogue output are provided for connection to external monitoring systems.
|
|
|
|
|
|
The optimal hardware structure for varying applications is achieved by combining various standard mechanical and electronic modules. The measured values are available on two freely configurable and scaleable analogue outputs and on the serial RS232 interface.
Two freely configurable optional alarm outputs can be set by software. The measured data and the corresponding MIN/MAX values can be viewed on the optional LCD display. By selecting a suitable housing version the EE29/EE31 series can be used for the entire range of humidity measurement applications:
Model A: for wall mounting
Model B: for duct mounting
Model D: with remote sensing probe for measurements in the range of -40...180°C
Model E: with remote sensing probe for pressure tight applications between 0,01...15 bar
Model F: with rear cable outlet for wall mounting in clean room applications
Technical data
Measuring range: 0-100% RH; -40...180 °C
Outputs: 0-5V, 0-10V, 4-20mA, 0-20mA
Accuracy: +/-2% RH; +/-0.2 °C
Supply: 24V AC/DC
|
|
... for measuring the moisture content within a split second in a production run in progress thanks to the use of microwave resonance technology.
– Moisture analysis in less than 1 second
– Complete process monitoring
– Results independent of the color and surface structure of a sample
– Non-destructive measurements
– At-line measurements also possible
|
|
|
As the new Moisture Analyser for all purposes, the IR-35 offers a great performance especially matched to the daily needs in a laboratory. Its easy operational concept provides a large and clearly arranged display - that gives all important information at a glance, as well as an easy menue navigation - that directs the user with the help of easy to understand symbols from taring the sample pan to the beginning of the analysis in just three steps. Thanks to the fully self-controlled determination of the endpoint, no programming of a shutoff criteria is necessary. The moisture determination is monitored continously and the analysis is stopped once no further weight loss is detected.
|
|
|
|
|
|
Utilizing an Aluminum Oxide sensor 600 times more sensitive than conventional sensors
The 8800 series uses field proven aluminum oxide (Al2O3) sensing technology to accurately detect trace moisture on either a continuous or spot checking basis.
All Al2O3 sensors share the same basic operating principle: the capacitance measured between the sensor's aluminum core and gold film deposited on the oxide layer varies with the water content. However, the Series 8800 moisture sensor employs unique Hyper Thin Film (HTF) technology, which offers three major structural improvements in Al2O3 sensor design.
Versatile Design Options
The Series 8800 Single Point Trace Moisture Analyzers are provided in four compact, reliable designs with the ability to detect moisture from -100°C to ambient dewpoint levels of +20°C on either a continuous or spot checking basis.
- 8800A – Flush Mount DIN enclosure with connections made via a pluggable screw terminal block
- 8800B – Wall Mount N4X (IP65) enclosure with connections made 3 bottom watertight fittings
- 8800P – Portable battery operated design available in the Standard Version, I/O Version, and I/S Version (I/S version suitable for hazardous areas)
- 8800T – Low-cost, loop powered 4-20mA transmitter design with built-in LCD display
|
|
MIDAC's V-Series Moisture Analyzers provide unprecedented capability for detecting moisture and other impurities in corrosive gases. V-Series systems are the only complete, turnkey systems to give you all these features and capabilities:
- detection to less than 10ppb of H2O in many corrosive matrices, including Ammonia
- detection to 1.0 ppb in HCl
- complete immunity to the effects of atmospheric background moisture
- extremely fast response and equilibration times
- the ability to analyze multiple compounds in addition to moisture
- customized low volume sample cells electro-polished to eliminate moisture retention
- low internal power dissipation for durability under extended vacuum operation
- sensitive thermo-electrically cooled InAs detector
- short set-up time and easy transportability
- customized dedicated analytical and process software
- superior corrosion-resistant materials for extended service life
|
|
Designed to quickly, effectively and affordably measure moisture content, the Ohaus MB Series Moisture Analyzers incorporate state-of-the-art halogen heating with precision weighing technology to give a fast and accurate method for moisture content determination.
Perfect for applications in the pharmaceutical, chemical and research industries; versatile and rugged enough for continuous operation in food and beverage, quality control, environmental and many other applications.
|
|
Process Hygrometer Hygrophil® H 4230
Particularly suitable for cases where the air to be measured contains oil vapours, dust, water soluble gases, solvents, acids and aggressive chemicals.
Long-term stable psychrometer
Measurement range 0...100°C dewpoint
Profibus DP
Analogue outputs
System solution including gas withdrawal sensor, heated gas pipeline und measurement device
|
|
The METTLER TOLEDO family of moisture analyzers provides fast, precise and reliable moisture determination. Our solutions cover industries as diverse as pharmaceutical requiring compliance with regulations, plastics with the need for highest resolution or the food industry requiring robust and simple-to-use instruments for routine testing on the factory floor.
For more information, please click on the models listed below. To get support or a quote, please choose the appropriate button.
|
|
Designed to quickly, effectively and affordably measure moisture content, the Ohaus MB Series Moisture Analyzers incorporate state-of-the-art halogen heating with precision weighing technology to give a fast and accurate method for moisture content determination.
Perfect for applications in the pharmaceutical, chemical and research industries; versatile and rugged enough for continuous operation in food and beverage, quality control, environmental and many other applications.
|
|
|
|
|
|
The moisture measuring system IR 3000 consists of a non-contact working measuring head and a menu-driven interface for calibration and programming of the moisture measuring system.
The menu-driven interface is installed near to the measuring head and used as an external display near to the measuring position.
This allows reading of the measured moisture values at the sampling devices, for laboratory purposes.
With an Ethernet network or serial connection, measured values will be transferred from the menu-driven interface to a visualisation PC in the control room or to a process control system. Here, the central evaluation and display of all connected measuring systems will take place.
To achieve accurate measurement, a continuous flow of material is required. For operational areas, where a continuous material flow is not guaranteed, special sampling devices should be used. During this process, the material falls into an opening by the sampling device. Once measurement of a sample is complete, it is removed by compressed air so that the sampling device refills with material and the next measurement can take place.
|
|
|
|
|
|
|
The rugged Thermo Scientific MOLA is a state-of-the-art moisture on-line analyzer which uses patented neutron backscatter pulse mode ion chamber technology to non-intrusively measure the concentration of hydrogenous material in a process vessel. In iron and steel making, the MOLA is used to improve the operation of the blast furnace by accurately measuring the moisture content in metallurgical grade coke and/or iron ore pellets. The ion chamber in the MOLA acts as a hydrogen molecule detector and, based on the amount of hydrogen present, can determine the moisture in coke. Pulse mode technology allows for excellent stability and repeatability over a very wide temperature range without the need for high voltages or temperature stabilization of the circuitry. It has proven to help steel mills more effectively manage variability in coke size, harsh environmental conditions at the point of measurement and high coke volume. The MOLA is easy to install with no component exceeding 45 pounds. It also features a streamlined design that allows for rapid diagnostics and servicing of the unit.
|
|
|
The Spectra-QuadTM provides real-time information on moisture and other critical product parameters by monitoring product content. With the Spectra-Quad, you can control product quality and enhance process efficiency, which will improve your bottom line.
|
|
|
|
|
|
Speedy Moisture Tester for foundries and powders
The Standard Speedy 2000 series of moisture testers combines time proven dependability of the pressure test procedure with the convenience of an electric balance.
Moisture measurements are obtained by following a simple test procedure:
Prepare and weigh the material sample using the electronic balance.
Place the sample in the Speedy vessel.
Add the reagent to the recess in the Speedy cap and seal the vessel.
Shake the Speedy to mix the reagent with the sample.
Read the moisture content directly from the integral gauge.
Technical Information:
Standard Speedy vessel fitted with calibrated pressure gauge, electronic balance, heavy duty carry case with fitted foam inserts, cleaning brush and cloth, measuring scoop and instructions.
Nominal gross weight: 12.1lb (5.5Kg)
Nominal gross dimensions: 20 x 15 x 8" (510 x 380 x 200mm)
For 0 - 10% range: 12g
For 0 - 20% range: 6g
Maximum sample size: 0.4" (10mm)
Moisture measurement range expressed as a percentage of the wet weight of the sample: Model F-S2000C: 0 - 10%, Model F-S2000D:0 -20%
|
|
| ... products without technical information |
| |
|
|