|
|
|
|
|
|
Hydro-Probe II (HP02)
Digital sensor for accurate measurement of moisture in flowing materials such as concrete, sand and aggregates in bins, chutes or conveyor belts
Hydro-Probe II Moisture Sensor for Bins, Chutes and Conveyor Belts
The Hydro-Probe II (HP02) was the first moisture sensor to use the digital microwave moisture measurement technique. It has integral signal processing which provides a linear output (both digital and analogue) and it can easily be connected to any control system. Typical applications include sand, cement, concrete, asphalt and aggregates, but the Hydro-Probe II has also been successfully installed in processing plants for grain, cereal, animal feed and aqua feed.
Designed for use in processing plants which use bins (silos), chutes and conveyor or feed belts, the sensor is positioned into the flow of material. Measurements are taken 25 times per second as the material passes over or around the sensor head, meaning that the sensor can rapidly detect changes in moisture levels. Real time adjustments to the moisture content of the material can then be made during processing if required. This ensures that the manufacturer can continually produce a consistent, quality product and reduce costs by limiting the amount of wasted or spoilt materials.
The sensor can be installed in a variety of locations where there is a flow of material. Some typical examples can be found on our installations page. A range of accessories are available including extension mounting sleeves and clamp rings to assist with fitting.
|
|
|
|
|
|
Hydro-Probe Orbiter - Moisture Sensor for Rotating Pan, Static & Planetary Mixers
The World's first rotating microwave sensor for measurement of moisture and temperature in rotating pan, static and planetary mixers.
The Hydro-Probe Orbiter is the world's first rotating digital microwave sensor designed specifically to measure moisture and temperature in the mixer. With a choice of mounting options for static, rotating pan and planetary mixers the sensing head slices easily through the mix providing accurate moisture measurement of the material in real time.
Originally supplied to the concrete industry, the Hydro-Probe Orbiter can also be mounted as a static sensor underneath a bin or above a belt conveyor and is therefore easily adaptable for use in other industries such as sand, aggregates, cereal, animal feed and fish meal.
The Hydro-Probe Orbiter comprises of 2 parts - the head unit which houses the electronics and connections and the sensing arm with a hard wearing ceramic head. Both the sensing arm and the head unit can be easily changed eliminating the need to replace the entire sensor. To extend the life of the Hydro-Probe Orbiter, the Orbiter should always be fitted with wear protection sleeves.
|
|
The MS100 offers a compact solution for permanent control in real time of the level of contamination of water in the hydraulic systems and of lubrication used in all industry.
* For the systems using of synthetic oils of oil/, hydraulic and of lubrication.
* Versions with the phosphate ester can also be specified.
* Be only 106 mm long and 50 mms in diameter.
* Conceived for a maximum operational pressure of 420 bar.
Advantages: A useful measurement which offers a method of calculation simple and quantitative of the contents of moisture in the hydraulic systems or lubrication.
* Provides results in real-time, precis and repetitive in the form of percentage of saturation out of water.
* Utmost precision of detection.
* Allows to carry out a preventive maintenance in real time and to take corrective measures.
Applications: Industry of paper, systems hydraulic in the shipbuildings, transmission and distribution of power, recycling of oil, hydraulic systems industrial.
|
|
· 4 models: Standard, High Speed, Mark Detection and Moisture Detection.
· Unique "Moisture Sensing Type" BIF-W series senses the presence of moisture in a product.
· High Speed type (50 micro sec) and Green
LED type for Mark Sensing.
|
|
|
|
|
|
Protimeter Aquant Non-Invasive Moisture Meter
The Aquant has a digital display that is synchronized with a color-coded LED scale. The display shows the relative moisture level of the material under investigation on a scale of 0-999 and the color coded LED scale indicates the material%u2019s moisture condition. To use, the Aquant is simply held against the surface of the material under investigation. The relative moisture level is measured by radio frequency to a nominal depth of 10-20mm. There are no needles to mark the surface and the Aquant is not adversely affected by moisture.
Range 0 - 999 Relative
Display 12 - Digital LCD
Display 2 - 60 LED%u2019s
Hold Reading Feature
Depth of measurement-Up to ¾"
Case-Pouch with belt loop.
Power-9v (supplied)
Warranty-1 Year parts and labor
Features & Benefits:
Detects moisture directly in materials and below wall and floor coverings such as tile, wood and vinyl.
Reset reading for sensitivity adjustment
Not adversely affected by surface moisture such as condensation.
Dual Display LCD and LED.
Color changing LED's to show moisture condition.
|
|
Integrated moisture and temperature measurement.
The Protimeter Grainmaster i is a highly versatile instrument to measure the moisture and temperature of crops. The meter is pre-programmed with 15 crop calibrations, each of which can be adjusted individually, if required, for matching with respect to commercially used instruments.
It is supplied with an integrated grinder-compressor unit that enables the user to take moisture readings in ground samples very quickly and simply. There is also a range of optional probes for measuring temperature in stored grain (GRN6046) and moisture levels in baled hay and straw (GRN6138).
The Grainmaster i is supplied in a pouch with grinder-compressor unit, grain cup, sample spoon, brush and 'Quickcheck'. In addition to the 0-100 relative scale, the 15 pre-programmed calibrations include: Wheat, Barley, Oats, Oilseed Rape, Canola, Linseed, Peas, Corn, Sunflower, Coffee, Soya, Rice, Sorghum, Paddy and Beans
|
|
|
|
|
|
Speedy Moisture Tester for foundries and powders
The Standard Speedy 2000 series of moisture testers combines time proven dependability of the pressure test procedure with the convenience of an electric balance.
Moisture measurements are obtained by following a simple test procedure:
Prepare and weigh the material sample using the electronic balance.
Place the sample in the Speedy vessel.
Add the reagent to the recess in the Speedy cap and seal the vessel.
Shake the Speedy to mix the reagent with the sample.
Read the moisture content directly from the integral gauge.
Technical Information:
Standard Speedy vessel fitted with calibrated pressure gauge, electronic balance, heavy duty carry case with fitted foam inserts, cleaning brush and cloth, measuring scoop and instructions.
Nominal gross weight: 12.1lb (5.5Kg)
Nominal gross dimensions: 20 x 15 x 8" (510 x 380 x 200mm)
For 0 - 10% range: 12g
For 0 - 20% range: 6g
Maximum sample size: 0.4" (10mm)
Moisture measurement range expressed as a percentage of the wet weight of the sample: Model F-S2000C: 0 - 10%, Model F-S2000D:0 -20%
|
|
Surveymaster
Surveymaster is a moisture meter that displays the moisture level values on a digital display along side a scale of color-coded lights. This digital moisture meter helps in accurate building material moisture measurement [mini]. This combined presentation of moisture measurement helps the user to map the extent of problems and monitor changes in condition precisely and reliably.
Features & Benefits:
Surveymaster moisture meter is supplied with pouch, moisture probe, deep wall probes, calibration check device and wood calibration table.
|
|
| ... products without technical information |
| |
|
|
|
|
HUMLOG 10
Data logger for humidity and temperature
HUMLOG 10 series humidity/temperature data loggers permit the exact and professional recording of humidity and temperature values. Low power consumption and large memory size enable long-term data capture for a wide range of applications.
HUMLOG 10 / HUMLOG 10TSE:
The elegant 2-part housing, which consists of a display module and a plug-in sensor module, enables easy installation and a fast exchange of the sensor unit when service is required.
The current measurement data on the large display is easy to read even from a distance of several metres.
HUMLOG 10THC:
The compact HUMLOG 10THC version does not have a display and is equipped with internal H/T sensors.
Measurement Data - Evaluation & Configuration:
Measurement data evaluation and instrument configuration can be conveniently performed via the serial RS232 interface with a PC or notebook computer by means of the Smartgraph TM 2 software, which runs under MS Windows TM.
Smartgraph TM 2 can display the recorded measurement data in graphical form or as a table. The layout of the display can be individually configured by the user.
|
|
The HOBO U12 Stainless Temperature Data Logger is ideal for food, pharmaceutical, autoclave, and other applications where high-accuracy temperature data is critical. With its broad temperature range (-40 to 125C) and food-grade stainless steel housing, the U12 Stainless Temperature Data Logger withstands process conditions from pasteurization to flash freezing and washdown. The U12 Stainless is also ideal for high-temperature or deep underwater applications.
Features:
- Food-grade 316L stainless Temperature data loggers
- High-accuracy, extended temperature range
- Suitable for high pressure applications to 2200psi
- Fast readout via direct USB interface
|
|
ShockWatch temperature recorders give you the ability to monitor and record temperature and humidity to ensure acceptable environmental conditions for your sensitive goods.
The DataScribe RH52s device monitors and records temperature and humidity through a linear dual channel. Its small size and built-in sensors allow it to go where no other logger can, which enables it to be easily concealed for added security. Despite the small size, this device is accurate, reliable, and has a large memory capacity. Accuracy is an impressive +/- 1 degree F and +/- 3% RH guaranteed. The quality of the RH sensor is unaffected by condensation, immune to most reagent vapors, has a fast response time, and has excellent long-term stability. The large memory and long battery life make this device ideal for remote applications. It records up to 16 months of hourly readings in protected memory, ensuring that you don't lose your data if the battery is removed.
|
|
8-channel, Web-enabled temperature measurement modules :
- WEB-TEMP supports J, K, R, S, T, N, E,
& B type thermocouples, 2-, 3-, or 4-wire RTDs and thermistors,
and semiconductor temperature devices
- WEB-TC supports thermocouples only
- Built-in ambient CJC temperature sensor
- Independent temperature inputs
- Built-in Web server/Web page
|
|
|
|
|
|
UR C30 Controller System
Digital Controller for Bay Control and Substation Automation
Protection and Control:
User-definable protection functions
Programmable logic, timers, counters
Distributed logic, remote I/O expansion
Up to 96 digital input and 64 digital outputs)
Transducer I/Os (RTD, dcmA)
Monitoring and Metering:
Oscillography - 64 samples/cycle, up to 64 records
Event Recorder - 1024 time tagged events, 1 microsecond
resolution
DataLogger - Up to 16 channels with user selectable
sampling rate:
User Interface and Programming
Front panel display and keypad for local access; RS232 port for local PC access
User programmable local display, LEDs and pushbuttons
Customize protection and control functions with FlexLogic,
FlexCurves, and FlexElements:
Includes EnerVista LaunchPad - Simplified relay setup and programming
Multi-language - French, Chinese, Russian option
Communications:
Networking options - Ethernet-fiber (optional redundancy), RS422, RS485, G.703, C37.94
Multiple protocols - IEC 61850, UCA 2.0, DNP 3.0, Modbus, IEC-104, Ethernet Global Data (EGD)
Direct I/O - exchange of binary data between URs
|
|
Protimeter HygroTrac
The Protimeter HygroTrac is a simple and cost-effective system for remote environmental monitoring in buildings. Data can be viewed live over the internet showing parameters such as moisture content relative humidity and temperature.
Set threshold alarms
Receive alarm warning via email and text message
Comprehensive site reports
Reduce costly site visits
Wireless Sensors
Transmit data at user-selected intervals to data acquisition gateway.
%RH
Temperature
Moisture content in materials
Data Acquisition Gateway
Data collection point receives and stores data from all wireless measurement sensors. Information is then sent to a secure web server. Data can also be stored directly on the gateway if an internet connection is not available.
Applications:
Permanent installation into a wide range of building environments where moisture and subsequent mold growth is a concern.
Monitor storage facilities where moisture sensitive products are held such as paper and timbe
|
|
| ... products without technical information |
| |
Applications: Reprography, HVAC Controller
Industries: Medical, General Industry, Consumer Goods
Description: Based on the rugged HS1101LF humidity sensor, HTM1735LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module's humidity linear voltage and direct NTC outputs. HTM1735LF is designed for an optimized board to board connection.
Features:
- Suitable for direct board assembly
- Product free from Lead, Cr (6+), Cd and Hg
- Humidity calibrated within ±2% RH @ 55% RH
- Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5V DC supply
- Temperature measurement through NTC 10kOhm ±3% direct output
- Full interchangeability
- High reliability and long term stability
- Not affected by repeated condensations
- Ratiometric to voltage supply within the specified range
|
|
|
|
|
|
Applications: Industrial, Process control, Hygrostat, Data logger
Industries: Medical, Aerospace and Military, Test and Measurement, Transportation, General Industry, Consumer Goods
Description: Based on the rugged HTS2010 humidity / temperature sensor, HTM2500 is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed. Direct interface with a micro-controller is made possible with the module's humidity linear voltage output.
Features:
- Hermetic Housing
- Humidity calibrated within ±2% @55%RH
- Temperature measurement through NTC 10kOhm ±3% direct output
- Small size product
- Typical 1 to 4 Volt DC output for 0 to 100%RH at 5Vdc
- Full interchangeability
- High reliability and long term stability
- Not affected by water immersion
- Ratiometric to voltage supply
- Suitable for 3 to 10 Vdc supply voltage
Humidity Sensor Specific Features:
- Instantaneous de-saturation after long periods in saturation phase
- Fast response time
- High resistance to chemicals
- Patented solid polymer structure
Temperature Sensor Specific Features:
- Stable
- High sensitivity
|
|
HumiTracTM features a NIST traceable, field-replaceable sensor tip module that allows the end user to replace the sensor on-site and maintain ±2% RH accuracy and NIST traceability. This virtually eliminates the need for time consuming and costly factory calibration, while reducing downtime during service intervals to near zero. HumiTracTM is designed to be highly configurable in the field - by minimizing the necessary number of orderable configurations, GE reduces distributor inventory costs and provides maximum flexibility to the installer. All versions feature field-selectable outputs (0-5V, 0-10V, 4-20mA) and passive temperature versions incorporate both a 3K and 10K O thermistors. Signal-conditioned temperature versions are available scaled from 0 to 50°C or -40 to 60°C. HumiTrac is available in humidity accuracies of ±2% or ±5%, and offered in wall mount, duct mount and outdoor air configurations.
|
|
|
|