Molding machines

271 companies | 1164 industrial products

Companies per page

2 products Stork
Stork STORK E
Horizontal hydraulic injection STORK E Stork

The STORK E injection moulding machine is a full electric injection moulding machine. The clamping unit is constructed as a rigid and stable 5 point toggle mechanism. The STORK E is available at clamping...

Stork 1000 - 24 000 kN | STORK S+
Horizontal hydraulic tiebarless injection clamping force 1000 - 24 000 kN | STORK S+ Stork

The STORK S+ is the successor to the popular and reliable S series. The outstanding performance of the STORK S+ has been made possible by the development of a new modular drive system and through important...

DEKUMA Rubber and Plastic Technology Ltd. RVSe series
Vertical hydraulic injection for rubber applications RVSe series DEKUMA Rubber and Plastic Technology Ltd.

Product characteristics: Energy saving, Low operating cost The output of servo system is completely based on the required pressure and flow of machine, eliminating the reactive energy consumption,...

DEKUMA Rubber and Plastic Technology Ltd. 3 000 - 24 000 kN | RA series
Vertical hydraulic injection for rubber applications 3 000 - 24 000 kN | RA series DEKUMA Rubber and Plastic Technology Ltd.

Machine designed particularly for high voltage composite insulator applications. Precise components and high quality supporting parts extending service...

DEKUMA Rubber and Plastic Technology Ltd. 2 000 - 5 000 kN | RV series
Vertical hydraulic injection for rubber applications 2 000 - 5 000 kN | RV series DEKUMA Rubber and Plastic Technology Ltd.

Product characteristics High precision, high output. extended service life Precise components and high quality supporting...

DEKUMA Rubber and Plastic Technology Ltd. 25 - 80 t | RC series
Vertical hydraulic injection for rubber applications 25 - 80 t | RC series DEKUMA Rubber and Plastic Technology Ltd.

Product characteristics: Adopts plasticizing and injection completely separated, first-in-first-out...

DEKUMA Rubber and Plastic Technology Ltd. 900 - 2 800 t | RL series
Bimaterial horizontal hydraulic injection for rubber applications 900 - 2 800 t | RL series DEKUMA Rubber and Plastic Technology Ltd.

Product characteristics: Adopts the advanced German injection system and the mature two-platen clamping...

Rohwedder Microtech
Horizontal hydraulic injection Rohwedder Microtech

As a further specialty, Rohwedder Micro Assembly GmbH develops user-specific automation solutions for complete overmoulding...

2 products OiMA
OiMA STRATOS
Horizontal hydraulic injection STRATOS OiMA

The introduction of multi-material and multi-colour moulding techniques over the last few years has effectively revolutionised the entire product concept in various industries: automobiles, electronic,...

OiMA 1 860 - 22 000 kN | STRATOS HX
Horizontal hydraulic injection 1 860 - 22 000 kN | STRATOS HX OiMA

In the Stratos Hx series from 1,860 to 22,000 kN with hydro-mechanical clamping on the columns, mould dimensions and opening strokes are no longer a limit. The already-extensive geometric...

frigel firenze spa 90 °C | Thermogel TDM-TDD
Water operated temperature regulator for injection 90 °C | Thermogel TDM-TDD frigel firenze spa

Working fluid: Water Working temperature up to max.: 90°C Models: Single zone (M) Double zone (D) Configuration: Direct cooling, heating with electric heaters Applications: Injection...

frigel firenze spa 6 - 18 kW | Thermogel TRP
Water operated temperature regulator for injection 6 - 18 kW | Thermogel TRP frigel firenze spa

The TRP are equipped with sophisticated electronics and a particular hydraulic circuit which allow a high precision to be obtained in controlling the operating temperature (± 0.3°C). Heat exchanger...

Rondol Technology Ltd.  10 - 25 t | Kompress, LaboPress
Vertical hydraulic injection 10 - 25 t | Kompress, LaboPress Rondol Technology Ltd.

Auto Press - Rondol and Vogt automatic presses provide precise, durable and versatile performance. The Rondol benchtop Kompress and the Vogt floor-standing LaboPress range provide forces from 10 to 67...

video Rondol Technology Ltd.  50 - 120 kN | Medika
Electric micro injection 50 - 120 kN | Medika Rondol Technology Ltd.

Rondol Injection Moulding Machines are perfect for laboratory, batch and mass production of small medical components in a clean room environment. The Microject...

9 products Nordson Xaloy
Nordson Xaloy
Bimetallic injection molding barrel Nordson Xaloy

The structural shell of Xaloy bimetallic barrels consists of a microalloy steel that maintains high strength and straightness after casting of the wear-resistant alloy lining. Unlike some barrel manufacturers,...

Nordson Xaloy
Injection molding screw Nordson Xaloy

Fusion™ Screw. New barrier screw delivers higher throughput at lower melt temperatures than earlier barrier designs. Has proven its benefits in processing polyolefins, PET, ABS and PLA in various...

Nordson Xaloy Nano™ Mixer
Injection molding screw Nano™ Mixer Nordson Xaloy

Nano™ Mixer. In molding or extrusion of shear-tolerant polymers, the Nordson XALOY® Nano™ Mixer combines very intensive dispersionary mixing of colorants, fillers and additives with excellent...

Nordson Xaloy 1800 Kg/hr | WRP 12i
Die face water ring pelletizer 1800 Kg/hr | WRP 12i Nordson Xaloy

Xaloys water ring pelletizer connects directly to the end of the extruder, Xaloy Screen Changer or Melt Pump via a short coupled adapter allowing polymer to flow horizontally from the extruder to the...

Nordson Xaloy WRP-35s/36s
Die face water ring pelletizer WRP-35s/36s Nordson Xaloy

Nordson XALOY’s Water Ring Pelletizing Systems offer a modern, cost-effective method of pelletizing a wide range of unfilled and filled thermoplastic polymers. The Water Ring Hot Die Face ensures a consistent,...

Nordson Xaloy X-220
Bimetallic injection molding barrel X-220 Nordson Xaloy

Nordson XALOY Bimetallic barrels meet the needs for wear and corrosion resistance or more than 90% of all injection molding requirements. Strong and Straight The...

Bernex Bimetall AG
Bimetallic injection molding barrel Bernex Bimetall AG

The today’s processing of modern plastics with fillers and fibers...

2 products HOTSET
HOTSET BMD
Externally heated sprue nozzle for injection molding BMD HOTSET

For the plastic processing industry hotset offers with the hotspring® Machine Nozzle (type BMD - formally hotcone) the optimal possibility for...

HOTSET hotcast®
Sprue nozzle for injection molding hotcast® HOTSET

The heated sprue nozzle brings the point of thermal separation to the mold-parting surface and eliminates the major of the sprue excess material. Cycle times decrease up to 40 % and provide better...

5 products ASSO
ASSO FLEXO
Sprue nozzle for injection molding FLEXO ASSO

FLEXO asso The FLEXO nozzle stands out from the rest of the ASSO production because of its extreme flexibility and versatility. By simply substituting...

ASSO DPO
Sprue nozzle for injection molding DPO ASSO

Single DPO The Asso shutter nozzle is utilized for molding parts where maximum aesthetics is required at the point of injection. For this reason, the single...

ASSO DPV
Sprue nozzle for injection molding DPV ASSO

The free-flow DPV nozzle with an interchangeable tip. Very versatile, it is...

ASSO DD
Sprue nozzle for injection molding DD ASSO

DD The DD free-flow direct nozzle, useful for reduced spaces where...

ASSO 01-05-10
Sprue nozzle for injection molding 01-05-10 ASSO

01, 05 and 10 are torpedo nozzles appertaining to the economy range and are utilized for the production of low-cost molds and for molding...

1 products Herzog AG
Herzog AG W
Heat-conducting sprue nozzle for injection molding W Herzog AG

Heat conducting nozzles are increasingly used in the case of narrow mould recesses. They offer optimum heat distribution as far as the nozzle tip with minimum installation dimensions and do not require...

5 products Mauser
Mauser max. 50 p/h | BM 201
Extrusion blow max. 50 p/h | BM 201 Mauser

BM 201 Machine characteristics: * Single-station high performance extrusion blow molding machine * Single- and multi-layer technology available * For packaging from 60 to 250 liter...

Mauser max. 50 p/h | BM 201 Coex
Extrusion blow max. 50 p/h | BM 201 Coex Mauser

BM 201 Coex Machine characteristics: * Single-station high performance continuous extrusion blow molding machine * For packagings from 60 to 250 liters capacity * Process optimization * State-of-the-art...

Mauser max. 100 p/h | BM 202
Extrusion blow max. 100 p/h | BM 202 Mauser

BM 202 Machine characteristics: * Double-station high performance extrusion blow molding machine * For packagings from 60 to 250 liter capacity * Single- and multi-layer technology available *...

Mauser max. 30 p/h | BM 2001-150
Extrusion blow max. 30 p/h | BM 2001-150 Mauser

BM 2001-150 Product characteristics: * Single-station high performance extrusion blow molding machine * For containers from 500 to 1.500 liter capacity * Single, double...

Mauser max. 100 p/h | BM 20
Extrusion blow max. 100 p/h | BM 20 Mauser

BM 20 Machine characteristics: * Single and double-station high performance extrusion blow molding machines * Two machine types, for packaging up to 30 liter capacity, respectively 60 l capacity *...

video MAG-PLASTIC MACHINERY SA  SSB series
Stretch blow for plastic bottles SSB series MAG-PLASTIC MACHINERY SA

Designed for the production of standard and complex shaped PET containers, the SSB machines can handle packaging volumes from 40ml to 5L with output up to 6400 bp/h. Using linear 2 stage process, the...

video MAG-PLASTIC MACHINERY SA  LBM series
Stretch blow for plastic bottles LBM series MAG-PLASTIC MACHINERY SA

Magplastic’ LBM machines are combining the simplicity of linear machines (indexed – stationary mould clamping) with the production consistency of rotary machines (continuous preform heating). They are...

video MAG-PLASTIC MACHINERY SA  SLC series
Stretch blow for plastic bottles SLC series MAG-PLASTIC MACHINERY SA

The SLC models have been specifically developed for the production of large capacity single use or refillable PET containers – ranging from 11L to 26.5L (3 to 7 gallons) for nominal...

6 products Jomar
video Jomar Model 20
Injection blow Model 20 Jomar

Jomar Model 20 The Model 20 is the smallest in the Jomar line of machines. It was specifically engineered to process PET and to increase cavitation possibilities from the Model 15 without...

Jomar Model 40
Injection blow Model 40 Jomar

Jomar Model 40 The Model 40 is the perfect size for small to medium size pharmaceutical projects in terms of annual volume. The Model 40 has been popular with major converters who are...

Jomar Model 65
Injection blow Model 65 Jomar

Jomar Model 65 The Model 65 represents one the work-horses of the Jomar line of machines. It is is the most popular model for emerging...

Jomar Model 85S
Injection blow Model 85S Jomar

Jomar Model 85S Our most popular model, the Jomar 85S is the first machine to have proportional valves come standard. This reduces the wear on the machine without sacrificing...

Jomar Model 135
Injection blow Model 135 Jomar

Jomar Model 135 The Model 135 is where customers can really see the benefits of the small Jomar footprint. Capable of generating many millions of bottles per year, its hard to fin d a machine...

Jomar Model 175
Injection blow Model 175 Jomar

Jomar Model 175 The largest of Jomars regular line of products, the Jomar Model 175 is intended for projects with tremendous volume requirements. The size of the machine...

Useon (Nanjing) Extrusion Machinery CO., LTD
Die face water ring pelletizer Useon (Nanjing) Extrusion Machinery CO., LTD

Pelletizing system We have strand die, water ring, air cooling, and underwater...

HMG Extrusions GmbH
Die face water ring pelletizer HMG Extrusions GmbH

1 unit - Pelletizing Head with die face cutter made of German steel 1 set - Motor...

1 products Tecnova S.r.l.
Tecnova S.r.l. 700 - 1500 kg/h | TTC series
Air-cooled die face pelletizer 700 - 1500 kg/h | TTC series Tecnova S.r.l.

Neck for connection with the screenchanger. Vertical axle extrusion head with interchangeable horizontal die-chaser. Stainless steel circular cooling chamber....

video GS Manufacturing 2 gal/min, 4:1 | LWRTM
Resin transfer molding (RTM) unit 2 gal/min, 4:1 | LWRTM GS Manufacturing

LW RTM Systems Resin Transfer Molding System Meter-mix For Polyester - Vinylester Injection - Wet-out - Pouring * Wall Mounted Units For High Production * 5 Gallon Pail Mounted *...

GS Manufacturing 4:1 | LWRTM-LT
Resin transfer molding (RTM) unit 4:1 | LWRTM-LT GS Manufacturing

RTM Lite Systems Vacuum Assisted Lite Resin Transfer Unit * Portable or stationary units * Easy to operate * Low maintenance * Minimum purge * GS MEKP SLAVE PUMP * Optional timers, MEKP alarm *...

Filter by :
Refine the search
Molding machines
Extend the search
Search by manufacturer
Search by catalog
Associated Terms

molding systems, molding lines, casting units, molding devices, casting lines

With DirectIndustry you can find a nearby distributor, contact a manufacturer for an estimate or a price, or examine product characteristics and specifications.