The CS-EM is an economical energy flow monitor intended for applications in energy transfer and heating/cooling systems where energy use requires measurement.
In heat exchange loops the CS-EM internally calculates the energy gained or lost by the heat exchanger. The energy is calculated based on the the mass volume of liquid passing through ...
The DN-EM is an economical energy flow monitor intended for applications in energy transfer and heating/ cooling systems where energy use requires measurement.
In heat exchange loops the DN-EM internally calculates the energy gained or lost by the heat exchanger. The energy is calculated based on the the mass volume rate and the ...
The model DS15 flow meters work according to the proven variable area principle. The float is moved upward in a tapered tube by the flowing medium and its upper edge indicates the flow rate by means of a scale ...
The UltraTEV Alarm™ is a Partial Discharge (PD) system that combines all the benefits of EA Technology's award winning PD detection and monitoring, in one simple to install, automatic set up. It can monitor over 100 assets simultaneously and raise the alarm if one or more reaches critical PD levels.
*Constantly monitors all your HV/MV assets
*Warns of faults before they lead to ...
The ultimate system in EA Technology's PD instrument range, the UltraTEV Monitor™ is much more than a fault detection and alarm system. It is the most powerful tool ever developed for collecting and recording information on the condition of large numbers of assets. It detects and locates, measures and monitors, records and analyses all the data from all your substation equipment, including cables, ...
The Polarity Test Kit™ is a simple and effective way to detect live conductors accurately and safely. Compact and easy to use it comes complete with a Test Pen Checker to ensure this vital safety tool is working correctly.
*Safe and easy to use
*Lightweight with pocket ...
Water Vapor Permeation Instrument is applicable in water vapor permeation test for plastic films, laminated films, sheets, solar energy back sheets, high barrier materials, foils, OLED, water-proof membranes and bottles, pouches, jars, boxes made of plastic, rubber, paper, glass and metal, as well as medical devices, etc.
With water vapor permeation testing, controlling and adjustment of ...
MFY-01 leak tester is professionally applicable to the leakage tests of packages for food, ...
LSSD-01 leak and seal strength detector is professionally applicable to the quantitative ...
The FS10A is a universal flow monitor and switch specifically designed for gas and liquid process analyzer sampling systems. The FS10A is a fast responding, highly repeatable sensor which installs easily into a standard tube tee fitting or new SP76 (NeSSI) modular manifold.
The FS10A utilizes proven thermal dispersion flow measurement technology with FCI proprietary equal mass sensing to ...
The MPD 600 is a highly developed device for measuring partial discharges (PD). With excellent tools, even the smallest PD pulses are separated from interference and analyzed. The MPD 600 is suitable for many different PD measurement applications.
With ...
 Excellent performance
 Real time carbon monoxide detection and alarm
 Temperature and humidity detection and display optional
 Three-color backlit LCD indicates three CO ranges
 Buzzer alarm for a preset CO level
 Provide 1 x on/off output to control a ventilator
 Modbus RS485 interface optional
 Wall ...
 Real time detect and indicate ambiance carbon monoxide level
 Featured 6 LED indicator lights indicates different CO levels
 More than five years lifetime
 Provide 1x dry contact output to control a ventilator or an alarm
 Provide RS485 communication interface to be connected with a PC or a DDC/PLC
 The ...
Real time detecting environment ozone gas
�� Temperature & Humidity detection
�� Wall mount with LCD display
�� Provide one on/off dry contact relay output to control an ozone generator or a fan
�� Provide an analog ...
Reference M2041A
Type DH96WG
Description earth leakage ...
Reference P32011
Type ...
Reference P32010
...
Continuous on-line analysis often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure ...
The advanced electronics of the SiteGard detect the signal and present it to the operator using a modulating LED at the local sensor and an LCD display on the MonoGard processor. ...
The DCEM1000 Opacity Monitor is a single-pass optical device which uses visible light to measure the opacity and dust concentration within the flue gas. ...
Fuse monitors serve to monitor all types and versions of melting fuses that cannot be equipped with a fault signal contact. This ...
Fault Signaling Units
Overview
Fault signaling units are used in small plants where the installation of complex fault signaling systems would be too cost and laborintensive. In the event of a fault, they enable fast fault localization of all monitoring devices and limit monitors from a central location. This increases plant ...
Light indicators are used to signal switching states or faults in systems.
They are available as single, double or triple light indicators.
The triple light indicators are used as phase or signal indicators.
Benefits
- Pilot lights and caps can also be safely replaced ...
EGE's inline sensor SDN 552/4 can control heavy flows up to 100 l/min. The model complements the sensor expert's series of space-saving one-device solutions for monitoring flow rates and medium temperatures. The flow meter is designed for monitoring water flows. Features include one analog output ...
The separate remote control and display SDD was especially developed for the versatile SDI 853 inline flow meters. It allows you to read and adjust the devices even without direct access to the sensor. This ...
The compact models TN 552 GPP and TN 552/1 GPP have two independent adjustable switching points. The compact models TN 552 GAPP and TN 552/1 GAPP have one independent adjustable switching point and one scalable ...
Series 9000 cross stack infrared, in-situ carbon monoxide monitors provide high accuracy and reliability, coupled with straightforward installation and setup and is suitable for a wide range of industrial combustion efficiency monitoring applications. This carbon monoxide monitor is designed to provide the operator ...
Turbine Sentry - System Overview
An overview of the complete system and how this system is of benefit to gas turbine operators.
A typical system comprises three parts:
Blade Sentry - Measurement ...
The Model 4200 is a compact smoke, dust and particulate monitor ...
Real time flow measurement allows for active flow control
Differential pressure technology
< 10 ms response time
Flow ranges up to 250 SCFM & as low as 20 SCFH
Calibration to variety ...
Real time flow measurement allows for active flow control
Differential pressure technology
< 10 ms response time
Flow ranges up to 250 SCFM & as low as 20 SCFH
Calibration ...
3-1/2 digit display
LCD ...
Series 9000 cross stack infrared, in situ carbon monoxide monitors provide high accuracy and reliability, ...
The Land Model 4500 MkIII has reset the industry standard on compliance opacity and dust concentration measurement. Combining the unique features of three patented technologies, the 4500 MkIII achieves ...
Western Research Model 241CE monitors the hydrocarbon dew point of pipeline quality natural gas. Hydrocarbon ...
