|
|
TMCL-IDE
Description
Integrated Developement Environment for TMCL (PC-Software)
The TMCL-IDE is an integrated development environment for developing stand-alone TMCL applications and for configuring TMCM modules. The built-in editor with TMCL syntax highlighting allows comfortable editing of TMCL programs. TMCL programs can be assembled and downloaded into the module using all possible interfaces (RS232, RS485, USB, CAN or IIC). It is also possible to read back TMCL programs from a module for analyzing and modifying them. These features make it easy to develop and test even large TMCL applications. The TMCL-IDE also contains other powerful tools that make it possible to easily find the best parameters for StallGuard and to calculate velocity and acceleration parameters.
The TMCL-IDE comes free of charge with all Trinamic TMCM modules.
|
|
|
|
|
|
GalilTools is Galil's set of software tools for current Galil controllers. It is highly recommended for all first-time purchases of Galil controllers as it provides easy set-up, tuning and analysis. GalilTools replaces the WSDK Tuning software with an improved user-interface, real-time scopes and communications utilities.
The Galil Tools set contains the following tools: Scope, Editor, Terminal, Watch and Tuner, and a Communication Library for development with Galil Controllers.
The powerful Scope Tool is ideal for system analysis as it captures numerous types of data for each axis in real-time. Up to eight channels of data can be displayed at once, and additional real-time data can be viewed by changing the scope settings. This allows literally hundreds of parameters to be analyzed during a single data capture sequence. A rising or falling edge trigger feature is also included for precise synchronization of data.
The Program Editor Tool allows for easy writing of application programs and multiple editors to be open simultaneously.
The Terminal Tool provides a window for sending and receiving Galil commands and responses.
The Watch Tool displays controller parameters in a tabular format and includes units and scale factors for easy viewing.
The Tuning Tool helps select PID parameters for optimal servo performance.
The Communication Library provides function calls for communicating to Galil Controllers with C++ (Windows and Linux) and COM enabled languages such as VB or C# (Windows only).
GalilTools runs on Windows and Linux platforms as standard with other platforms available on request.
|
|
Ingenia servo drive controllers can be configured and operated through their registers. To do this, it is necessary to establish a communication channel with the controller and to activate the desired registers. Such configuration and operations can be tedious due to the need to use low level syntax and to know communication protocols, etc.
So that you don’t have to worry about these tasks, Ingenia has developed Motion Control Library (MCLib).
MCLib brings together a series of functions and components that provide an application programming interface (API) in C/C++ for Ingenia Servo Drive controllers.
All of this means that MCLib releases the integrator from register programming and protocol management tasks, allowing them to concentrate on final application development.
|
|
What is Motion Perfect?
Motion Perfect 2 is designed to be used in conjunction with Trio Motion Technology's Motion Coordinator range of multi-tasking motion controllers.
It provides the user with an easy to use Windows based interface for rapid application development, controller configuration and monitoring of processes running on the controller.
|
|
Delta's powerful motion control software packages allow you to set up, display, troubleshoot, configure and control all features of Delta's motion controllers.
The motion control software is shipped with the motion controllers and is available for free download.
The software packages are controller-specific. Use the chart below to determine which software you need.
|
|
From now on there is a new Epson robot control software available. The new Epson RC version is not only a new relaes of Epson powerful robot control software, but comes along with a bulk of new and helpful features.
One of the mostimportant improvements is, that the new software supports a french GUI. Beside German and english the new software now supports all major languages in Europe.
Also the connectivity has been improved by an important part. Beside the numerous existing interfaces, Standard I/O, Ethernet I/O, RS232, Centronics and USB, now Fieldbusses are supported %u2013 concrete Profibus and Devicenet.
Also the new Epson ProSix robot series can be equipped now with the powerful Epson vision system.
|
|
Speeder-one® is the extremely intuitive and user-friendly software interface that controls all of our digital drives.
- Easy to use.
- Install utilizing Windows ‘98, Windows 2000 or Windows XP software.
- Allows configuration of all motor and drive parameters.
- Allows positioning profile parameter configuration.
- Can be used for monitoring drive motor functioning.
- Allows testing of various drive operation modes.
- Procedures for auto-phasing and analog input.
- Analog I/O management.
- Digital I/O management.
- Allows saving and loading of configuration files for motor/drive coupling and integrated positioning system.
- Under development:
oscilloscope tools
additional language
file confrontation tool
|
|
|
WinMotion combines soft motion, soft PLC, and HMI in a single, scaleable software application that provides single or multi-axis control across a full range of general motion applications including: material handling systems, semiconductor manufacturing equipment, printed circuit board manufacturing equipment, gantries, packaging machines, and test and measurement equipment.
|
|
|
PMC provides a comprehensive suite of software and programming tools that are compatible across our range motion control cards - and included at no extra charge.
|
|
SMP general motion controllers provide high-end motion control (up to 32 axes), an industry-standard PLC, and a Windows-based GUI, in a single software package. These controllers are truly PC-based, providing all-software motion and machine control solutions that require no motion control/PLC boards.
This SMP series of multi-axis, high-speed controllers is ideal for motion control applications in many industries: packaging, materials handling, pick and place, converting, food processing, laser cutting/engraving, plasma cutting, wood-working, semiconductor and more.
|
|
|
|
|
|
M-SMC Software Motion Control
* Software module for the regulation of speed and/or positioning of motion axes
* Combined open loop/closed loop mode possible
* Master/slave operation for synchronous motions
* Convenient start-up via monitor
* Library for IEC 61131-3 PLC programs
M-CNC Three-dimensional motion
* Motion for cartesian 3-axis system
* Profile specification to DIN 66025 (program design for numerically controlled axes)
* Interfaces (analog, incremental, fieldbus, etc.)
* Configuration and diagnostic via Device Manager
* Start-up interface (CNC monitor)
* Library for IEC 61131-3 PLC programs
M-SHAFT Virtual Shaft Controller
* Software module that simulates a virtual shaft (0° to 360°)
* Cyclical and synchronous control with 32 axes
* Rotational speed of shaft can be changed during operation
* Independent master operation or can be synchronized as slave
* Convenient axis start-up via monitor (individual axes and total system)
M-HVC Speed and Positioning Regulator
* Software module for the regulation of speed and/or positioning of motion axes
* Configuration as speed or position controller or as cascade controller
* Combined open loop/closed loop mode possible
|
|
MotionDesk
ORMEC's MotionDesk Development Kit provides a complete motion programming environment on any IBM-PC or compatible computer running Windows 95, 98, NT, 2000 or XP (Windows Vista is not currently supported, MotionDesk can run in a virtual Windows 95/98/NT/2000/XP machine within Vista). The MotionDesk Development Kit provides software tools to simplify the configuration, development and maintenance of ORMEC motion control systems.
MotionDesk is a fully integrated, Windows-oriented "desktop" for motion control. It utilizes drop-down menus, toolbars and dialog boxes and presents a graphical user interface (GUI) to ORION controllers that is both intuitive and powerful.
|
|
|
|
|
|
SMNC is a G-Code based Servo Motion Control System that delivers multi-axis contouring without an expensive control panel and without a cabinet full of controls. With a suite of features, SMNC can convert CAD-dxf files into motion control g and m codes. With SMNC Software, one can deliver 3 axes of CNC at a cost comparable to a single annual service call for a traditional machine.
SMNC features a main screen similar in appearance to a traditional CNC system.
Along with a host of features comparable to a CNC system, SMNC includes:
* Linear and Circular motion control of multiple axes
* Configure Motors across multiple Serial ports
* Ability to set up on axis to mimic or copy another for gantry systems
* Smooth control of accel/decel for sensitive curvilinear motion
* Large Numerical display
* DXF input available
* 6 axis of control (includes axes mimic and Spindle)
* RS232 and/or RS-485 communication
* User definable M-Codes
* Each axis is configurable to match your hardware
* Side-screen displays your source code as it is executed
|
|
| ... products without technical information |
| |
An index table can be controlled in many different ways. We have developed this universal controller to provide our customers with a user-friendly tool for operating Motion Index Drives rotary table requiring minimal effort on the operator's part.
- Cycle time optimization is a result of stopping the index drive exactly at the end of the dwell phase. The machine control receives teh "enable" signal for the extrenal processes as soon as the dwell phase begins. Elimination of time losses typically caused by mechanical contactors and variable PLC cycle times.
- Fast, friction free braking for emergency stop conditions
- Gentle restart from intermediate positions or from an emergency stop
- Oscillating or change in direction of rotation possible without additional hardware.
- Speed can easily be changed
- When the TIC is used the rotary index table requires no maintenance
|
|
| ... products without technical information |
| |
Our resourcefulnesses `identification ID allow a sure and fast identification of parts. The head D `writing/reading (SLK) offers a connection by various interfaces: multi-poles, bus -I, drank Profibus-DP,...
The mobile supports of data (MDT) have a nonvolatile EEPROM (a safeguard by pile N `is not necessary) with a capacity going until 8k bits of memory. Moreover, the data carriers can not only be gone up on the top of the pallet part holders, but also in lower part see being integrated completely in the pallets part holders.
The ID allow a dynamic transmission of the data until a speed of transport reaching 20 m/min.
|
|
Our resourcefulnesses `identification ID allow a sure and fast identification of parts. The head D `writing/reading (SLK) offers a connection by various interfaces: multi-poles, bus -I, drank Profibus-DP,...
The mobile supports of data (MDT) have a nonvolatile EEPROM (a safeguard by pile N `is not necessary) with a capacity going until 8k bits of memory. Moreover, the data carriers can not only be gone up on the top of the pallet part holders, but also in lower part see being integrated completely in the pallets part holders.
The ID allow a dynamic transmission of the data until a speed of transport reaching 20 m/min.
|
|
Our resourcefulnesses `identification ID allow a sure and fast identification of parts. The head D `writing/reading (SLK) offers a connection by various interfaces: multi-poles, bus -I, drank Profibus-DP,...
The mobile supports of data (MDT) have a nonvolatile EEPROM (a safeguard by pile N `is not necessary) with a capacity going until 8k bits of memory. Moreover, the data carriers can not only be gone up on the top of the pallet part holders, but also in lower part see being integrated completely in the pallets part holders.
The ID allow a dynamic transmission of the data until a speed of transport reaching 20 m/min.
|
|
Our resourcefulnesses `identification ID allow a sure and fast identification of parts. The head D `writing/reading (SLK) offers a connection by various interfaces: multi-poles, bus -I, drank Profibus-DP,...
The mobile supports of data (MDT) have a nonvolatile EEPROM (a safeguard by pile N `is not necessary) with a capacity going until 8k bits of memory. Moreover, the data carriers can not only be gone up on the top of the pallet part holders, but also in lower part see being integrated completely in the pallets part holders.
The ID allow a dynamic transmission of the data until a speed of transport reaching 20 m/min.
|
|
|
|
|
|
FRL's - 50 Series
High flow capacity FRL line - Filters, Regulators and Lubricators.
Features:
High Flow
High Pressure
T Handle Adjustment Regulator
Pilot Regulators to 2-1/2 NPT
Rugged Design
Metal Bowls with Sight Glass
1/4 to 1-1/2 NPT Size Range
Assemblies Available
FRL's - FlexiBlok FRL 14/22/32/42 Series
The Numatics 14, 22, 32, and 42 Series FlexiBlok¨ line is a series of high performance air preparation products. Introduced in 1997, the FlexiBlok¨ line is made from sturdy but light weight aluminum; perfect for applications such as robotic arms which cannot afford extra weight and less expensive to ship than zinc. The block head design with integrated mounting holes eliminates costly mounting plates and adapters, making the product easier to use and install. Private labeling is easy thanks to the special templates which snap securely in the front and back of the heads. These templates can be customized with names and/or logos; perfect for OEM applications.
The 14,22,32 series conforms to ISO 1179-1 and 228-1 requirements.
The 42 series will soon also conform to these requirements.
|
|
|
|
|
|
Drying Systems - LFT/LFE/LFA Series
Ultra Air Heatless Regenerative Dryers delivers a -40 F PDP, a dewpoint lower than that required by the Instrument Society of America. In colder climates, weather can negatively affect productivity by literally freezing and completely blocking outdoor air lines. Instrument air requires a quality of air that only a Regenerative type dryer can deliver. Therefore, whenever lower dewpoints are required for outdoor piping, instrument air, process air or gas drying, the Ultra Air Regenerative Dryings are the perfect solution.
Features:
Generous quantities of activated alumina desiccant
Centrally mounted pressure gauge and relief valves on each tower
ASME inspected and stamped and CRN registered pressure vessels (100 CFM and above)
Purge air mufflers to reduce exhaust noise
115-160, NEMA 4x electrical
Repressurization of regenerating tower before it goes on drying cycle to prevent desiccant dusting.
-40º F pressure dewpoint (lower dewpoint available)
Control air filter
Low pressure drops (3PSID maximum)
Fail safe mode
Dryer sequence lights
Reliable and proven inlet air control valves and purge valves assure years of reliable shifting of towers and proper dryer operation (Lifetime Warranty) LF Series 25-620 CFM.
1 year warranty
NEMA 4x
|
|
|
|
|
|
FRL's - Delta 901 Series Premium Filters
The Numatics Delta Series%u2122 offers premium filtration for applications which require high flows. The standard aluminum end caps on every element, premium manual drain, seals made of Viton®, and available 3 micron internal pleated prefilter sets the Delta Series%u2122 apart from other competitors.
Features:
Inner core - Prevents element from collapsing in backflow conditions
Optional internal pleated prefilter - 3.0 micron media protects the fine borosilicate fibers from large particles, extending the life of the coalescing media
Inner media wrap - Allows crossflow of gas which initiates the coalescing process
Media - Three coalescing media choices for best performance. Proprietary glass fiber blend combines low differential pressures and high efficiencies with maximum holding capacity (3 micron particulate and adsorbing grade also available)
Outer media wrap - Allows crossflow of gas and improves performance
Metal retainers - Supports the media both inside and outside during pressure spikes or high differential pressures
Drain layer - Large pore fibers allow the large coalesced liquids to drain to the bottom of the bowl
End caps - Aluminum end caps provide sturdiness and durability. The design of the bottom caps make inserting a new filter element easy.
|
|
Drying Systems - 201 Series
The Ultra Air 201 Series Refrigerated Dryer provides just that: a competitively priced dryer with consistent pressure dew points (33°F - 39°F), delivered quickly and backed by a five-year warranty.
Every dryer is designed with energy savings in mind. All components are properly sized to assure that no energy is wasted. Ample inside cabinet space and easy access components make for simple future maintenance and adjustments. Since only top quality components are utilized, the 201 Series will give the customer years of uninterrupted service.
Standard Specifications:
Maximum Pressure: 225 PSIG (16 BAR)
Minimum Pressure: 29 PSIG (2 BAR)
Maximum Temperature: 158 F
Voltage: 115/1/60, 208-230/1/60, 220-240/1/50
Power Consumption: 12 Watt Max
Pre-filter Rating: 0.3 Micron (Coalescer)
Afterfilter Rating: 3.0 Micron (Particulate)
Cycle Time: 4 Minutes
Purge Loss: 12%
Air Outlet Conditions: Dry air down to -40 F Dew Point
Power Cord: Standard 8 ft
|
|
Ultra ISC Tension Load Cell : Web Tension Control
The Ultra ISC is a tension transducer that directly outputs a +/- 10 VDC signal. CMC offers an ISC version for all models of our Ultra tension transducers. All Ultra ISC transducers include an Integrated Signal Conditioner (ISC) that is embedded directly in the "Ultra" type tension load cells. This is accomplished by extending the connector housing one inch and inserting a proprietary integrated amplifier designed by CMC.
|
|
 see the results for the following category : Brake units |
|
|
