|
|
|
|
|
|
The ToxiRAE 3 is a full-featured single-gas monitor that offers unequaled cost of ownership value. The ToxiRAE 3 is compatible with the AutoRAE Lite bump and calibration station, http://www.raesystems.com/products/autoraelite
STEL, TWA, low, and high alarms can also be recorded. The detector is warranted for 2 years and maintenance free with replaceable battery.
Overview:
— Lowest cost of ownership on the market.
— Rugged steel housing for harsh environments.
— Fastest instrument response time on the market for better protection and worker safety.
— Fastest bump station on the market with highest productivity, putting workers back to work quickly.
— Compact, low-cost bump and calibration station enables the ability to put the bump capability where it is needed.
Key Features:
- High-performance 3-electrode pinless micro sensor with the fastest response time
- 0.1 ppm H2S resolution, and high-range 1999 ppm CO available
- Large, easy-to-read display facilitates overview of gas concentration or days remaining (end-user adjustable)
- Event logging of up to 10 events
- Full activity records when used with AutoRAE Lite calibration station
- Intuitive, simple-to-operate user interface
- IP-67 water-proof and dust resistant
- Loud, 95 dB audible alarm, bright red flashing visible LEDs and internal vibration alarm
- Color-coded labels for gas type
- Extended operating temperature of -4° to 140° F (-20° to +60° C) with full T4 approval
- User-configurable bump/calibration reminders
Gas Range (ppm) Resolution (ppm)
Hydrogen Sulfide (H2S) 0-100 0.1
Carbon Monoxide (CO) 0-500 1
Carbon Monoxide (CO) 0-1999 1
|
|
|
|
|
|
AreaRAE Steel is the first ATEX certificated Wireless Monitor in Europe with up to 5 simultaneous gas sensors including Toxic Industrial Chemicals. It runs licence-free communication and RAE Systems can show over 2.500 installed base.
The AreaRAE Steel is housed in a welded stainless-steel enclosure, it is rugged, portable and weather-resistant, making it suitable for harsh environments. Ideal for hazardous materials and other emergency response monitoring applications, strategically placed AreaRAE Steel monitors can be used to quickly establish a perimeter, allowing first responders to back off to a safe position and monitor readings from up to 3 kilometers away.
The photoionization detector (PID) in the AreaRAE Steel can measure parts per million of volatile organic compounds (VOCs). In addition, it can be equipped with a lower explosive limit (LEL) sensor, an oxygen sensor, and one or two electrochemical toxic sensors for measuring specific substances such as hydrogen sulfide or chlorine.
An integrated wireless modem transmits real-time gas measurement data to a base station, which employs a standard Windows-based PC running ProRAE Remote software.
Key Features
- Up to five sensors (PID, LEL, O2 and two electrochemical toxic gas)
- Loud buzzer and large, extra-bright warning light
- Large LCD display and keypad
- Rugged, weather-resistant stainless-steel housing
- Built-in sampling pump
- Interchangeable Li-ion or alkaline battery pack
- Continuous operation via AC source
Applications
- HazMat and Emergency Response
- Refineries and Petrochemical Plants
- Power Plants
- Pulp and Paper Industry
- Marine and Offshore Wells
|
|
|
|
|
|
BW Technologies by Honeywell has raised the bar for maintenance-free detection with the new GasAlertClip Extreme. Providing two years of protection from H2S, SO2, CO or O2, the water-resistant GasAlertClip Extreme has a built-in concussion-proof boot and is ideal for offshore, marine, and other high-moisture environments.
Equipped with two alarm levels and an internal vibrator, the GasAlertClip Extreme now features four visual LEDs, and a high-output audible alarm. The large, alphanumeric display provides instant notification of gas alarms, test status, life remaining (months then days then hours) and peak (maximum) exposures encountered.
The GasAlertClip Extreme’s advanced microprocessor performs a full function self-test automatically on startup and on demand to verify sensor, circuit and battery integrity, as well as audible/visual alarm operation.
Generating a permanent record of gas alarm events has never been easier. The GasAlertClip Extreme allows for effortless transmission of stored event data to a cordless printer or a PC for review and analysis.
Despite being loaded with features, the GasAlertClip Extreme is compact and light, which makes it comfortable to wear. Clip it to your lapel, pocket, belt or hardhat for unequalled protection.
|
|
|
|
|
|
BW Technologies by Honeywell announces the arrival of the latest portable multi-gas solution – the GasAlertMax XT. Simultaneously monitoring for hydrogen sulfide (H2S) carbon monoxide (CO), oxygen (O2) and combustibles (%LEL), the GasAlertMax XT features a non-intrusive integrated sampling pump and SmartSample diaphragm pump technology. By offering one-button operation, the GasAlertMax XT provides ease of use and simple compliance to industry safety standards. Tamper-proof, user adjustable options enable the instrument to be customized to suit your specific application.
The GasAlertMax XT is ideally suited to a range of applications and customers including confined space entry, oil and gas, marine and shipping, utilities, wastewater treatment plants, power generation and municipal needs.
Powered by rechargeable batteries that provide enough power for an entire 13 hour shift, the compact GasAlertMax XT comes with standard event logging and datalogging. Calibration is simple with an automatic procedure. The GasAlertMax XT is compatible with the BW MicroDock II automatic test and calibration system. Multi-language support is available in English, French, German, Spanish and Portuguese.
For more information on the GasAlertMax XT, visit www.gasmonitors.com.
|
|
|
FirstCheck is the very first multi-gas to combine complete VOC and toxic gas detection from 1 ppb up to 10,000 ppm with traditional multi-gas sensors for oxygen, hydrogen sulfied, carbon monoxide and explosive gas detection.
|
|
Gasman
Intrinsically Safe Personal Gas Monitor
The new Gasman full function personal single gas monitor is compact and lightweight yet is fully ruggedised for the toughest of industrial environments. Featuring simple one button operation, it has a large easy to read display of gas concentration, and audible, visual and vibrating alarms.
* Versions available for flammable gas, oxygen and toxic gases
* Rechargeable versions for all gas types
* Non rechargeable versions for oxygen and toxic gases
* Ultra lightweight – just 80g for toxic versions
* Loud 95dBA audible alarm
* Dual colour visual alarm, red blue twin flashing LEDs
* Vibrating alarm
* IP65 and IP67 ingress protection
* Real time TWA and Peak display options
* Data and event logging as standard
|
|
The SafeLog 100 datalogging single gas monitor is designed for today’s demanding work environments.
It is rugged, lightweight, and features a large four digit display with backlighting and pulsating warning horn and visual alarms.
The SafeLog 100 is protected in an impact resistant ABS housing to take the punishments of real life work conditions.
The unit is powered by a user replaceable 9 volt battery that will supply 100 hours of continuous operation.
User flexibility is as simple as selecting from ten different interchangeable electrochemical sensors. The SafeLog 100 measures gas concentration at one sample per second. With an extended memory capacity, it datalogs 60 plus hours (continuous or multiple sessions) of 1 minute historical data.
|
|
The Rapidox 1100 offers fast and accurate oxygen analysis at an affordable price. This compact unit has a powerful diaphragm pump for continuous gas sampling and comes packed with features usually found only in larger and more costly devices. Windows data-logging software and programmable alarms are supplied as standard.
The choice of a high-performance zirconia or electrochemical cell provides high performance in almost every application. The 1000Z contains a fast and accurate zirconia sensor that is particularly accurate at very low oxygen concentrations and is compatible with acidic gases, for example CO2 and SO2.
The 1000E contains a long-life electrochemical sensor which is particularly accurate at high oxygen concentrations and can be used in a wide range of gases such as nitrogen, argon, helium, carbon dioxide and flammable gases. The sensor is not affected by the presence of hydrocarbons.
|
|
|
Single gas detectors for combustible gas are the economical way for measuring and monitoring flammable gases or vapors. They can be used for personal monitoring as well as for area monitoring. MSA offers the solution for your needs.
|
|
The Crowcon range of single and multigas detectors includes:
Eikon - Single gas disposable (O2, CO, H2S, NH3, Cl2)
Gasman - Full function, flammable, oxygen & toxic gas detector, incl exotics
Tetra:3 - Compact 4 gas detector (O2, H2S, CO, FL, O3, SO2, NH3, CO2)
Tetra - Multigas monitor with pump option, wide range of gases
TriplePlus+ - Flexible multigas monitor, wide variety of gases including IR sensors for detection of flammables in inert or purged atmospheres and pump option.
Detective - Transportable area monitor with linking capability. Wide variety of gases.
All models feature easy to use menus, tough construction and worldwide support, backed by nearly 40 years of experience.
|
|
GasCheck is conveniently calibrated against helium - the most commonly used tracer gas - and is particularly sensitive to ammonia, argon, butane, hydrogen, SF6 and refrigerants. The instrument range offers intrinsically safe versions for use in flammable areas and can also safely detect flammable gases.
GasCheck Features include:
- Detects even the smallest of leaks
- Repeatable readings
- Accurate leak measurement
- Intrinsically safe versions
- Data logging capability
- Hand held
- Large back lit display
- Choice of readings in ppm or ml/sec
Holds peak reading
|
|
In order to evaluate how much the human being is endangered by hazardous substances in the ambient air or explosive mixtures of gases and vapours in the air, appropriate measuring instruments can be used to recognize, measure and monitor dangerous concentrations.
|
|
The GasAlertMicro 5 IR, is a portable gas detector that simultaneously monitors atmospheric levels of up to five gases including carbon dioxide (CO2), oxygen (O2), hydrogen sulphide (H2S), combustibles (%LEL) and a range of toxic gases. Compact and lightweight, the GasAlertMicro 5 IR activates audible, visual and vibrating alarms in the event of a low, high, TWA or STEL alarm condition.
Utilizing a non-dispersive infrared (NDIR) CO2 sensor, the GasAlertMicro 5 IR offers premium accuracy and reliability. Suitable for personal protection in a wide range of applications, the GasAlertMicro 5 IR can dependably detect CO2 hazards in wineries and breweries, agriculture, food processing or any confined space entry application.
|
|
|
|
|
|
BW Technologies has set a new industry benchmark for performance, value and ease-of-use with the GasAlertMicro multi-gas detector. The ultra-compact and durable GasAlertMicro offers the most advanced features of any confined space gas detector on the market today, at the industry’s most economical purchase price.
Simultaneously displaying oxygen, hydrogen sulfide, carbon monoxide and combustibles present, GasAlertMicro delivers cutting-edge protection and is ideally suited to a wide range of applications, including hazmat response, confined space entry, search and rescue, and post-inspection fire safety.
GasAlertMicro’s features include high-output audible/visual/vibrator alarms; low, high, TWA and STEL alarm settings; a large, alphanumeric LCD; two LEL measuring units (0-100% LEL and 0-5% by volume methane); a built-in concussion-proof boot; and optional data-logging capabilities.
Field-selectable user options allow GasAlertMicro to be customized to virtually any environment. Calibration due-dates and alarm settings can be configured to meet specific industry requirements, and the pass code protect function ensures tamper-proof operation by preventing unauthorized users from accessing calibration options.
|
|
|
The MX4 iQuad™ can be configured to monitor from 1 to 4 gases including oxygen, combustible gas and a choice of two toxic gases including CO, H2S or NO2. The MX4 features an LCD readout of all gases, peak/hold function, STEL, TWA, datalogging and lithium-ion or alkaline battery operation. The small size and durable, lightweight construction make the MX4 ideally suited for personal monitoring needs. An optional hand pump is available for using the MX4 in remote sampling applications.
|
|
The MX6 iBrid™ is the new full featured multi-gas monitor from Industrial Scientific. The user-friendly design of the unit features a full-color liquid crystal display and 5-way navigation button to scroll through the menu-based operating system. Designed to meet a variety of monitoring applications, the MX6 iBrid™ can be set up to detect from 1 to 6 gases, including options for PID and infrared sensors for combustible gases and Carbon Dioxide. Configured with an internal sampling pump or for diffusion operation, it is ideal for applications from confined space entry to personal survey monitoring. The MX6 iBrid™ is compatible with the award winning DS2 Docking Station™ and iNet Instrument Network™ to further simplify and automate calibration, function (bump) testing and data management.
|
|
Built with the durability and simplicity found in every Industrial Scientific instrument, the M40 is a reliable, low cost gas monitoring solution for confined space or personal monitoring applications. The M40’s rugged composite case is immune to RFI, and houses four discrete sensors, a large LCD readout, and integral lithium-ion battery for up to 18 hours continuous runtime.
The M40 continuously monitors oxygen, combustible gases, carbon monoxide, and hydrogen sulfide in any combination, activating bright alarm light, 90-dB audible and internal vibrating alarms when gas concentrations exceed the preset limits. Additional standard features include Peak/Hold functions, STEL and TWA readings, a continuous loop datalogger and ‘Quick-Cal’ calibration.
|
|
The iTX Multi-Gas Monitor is the industry's most versatile portable gas detection instrument. Designed to grow with you as your monitoring needs change, the iTX can go from being a single gas unit to a six-gas monitor, or anything in between, with just a few simple user configurations and sensor changes. Featuring advanced "smart" sensor technology, the iTX is capable of recognizing and configuring a wide assortment of field replaceable, interchangeable sensors. Providing simplified, single-button operation and calibration functions, the iTX's special Quick-Cal feature quickly calibrates up to four sensors at once.
|
|
The Ntron Model PGA is a rugged, industrial 4-gas hand-held gas monitoring system. With up to four sensors per analyzer, it can be configured to detect flammable and toxic gases, as well as CO2 and Oxygen. Built-in audible and visible alarms include a 360-degree strobe and a 90dB horn.
The unit features an Intrinsically Safe design internal pump that contributes to the Model PGA’s Intrinsically Safe Certification.
Internal data logging can be downloaded through the PC interface facilitates to enable viewing or printing of data-logging info, instrument configuration, calibration (report printing), and programming. A convenient belt clip and hook is included, and rechargeable or dry battery packs are available.
|
|
|
|
|
|
Smaller and over 50% lighter than competitive instruments
Water-resistant design in an integral concussion-proof enclosure
Continuous LCD shows simultaneous gas concentrations for five gases
0 - 1000 ppm measurement of VOCs (Volatile Organic Compounds)
Integral motorized pump option for remote sampling
Two power options: AA alkaline or rechargeable hot-swappable battery pack
Provides 95 dB alarm tone and two bright wide-angled alarm bars
Equipped with internal vibrating alarm for high noise areas
Multi-language support in English, French, German, Spanish, and Portuguese
Three backlight options: standard- activates in low light (auto), in alarm (auto) and reactivates on-demand; alarm only- activates in alarm conditions and reactivates on-demand; stealth mode
Four alarm levels: instantaneous Low and High Alarm for all gases; TWA (time-weighted average) and STEL (short-term exposure limit) for VOCs and toxic gases
Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
Records TWA, STEL, and maximum exposures to gas and displays readings on command
User selectable field options include: PID correction factor, language selection, confidence beep, span level, set TWA/STEL calculation choice, set calibration due date, pass code protection, latching alarm, 'SAFE' display function, stealth mode, and selectable ppm resolution for some gases (e.g. SO2 0.1 ppm)
Full function self-test of: sensor, battery and circuit integrity; and audible/visual alarms
|
|
Built to Industrial Scientific’s highest quality and reliability standards, the full-featured GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. The instrument can be quickly adapted with interchangeable “smart” sensors to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the Docking Station™, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and logging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.
|
|
GasBadge Plus is a two-year, maintenance-free, single gas monitor ideal for personal protection from unsafe levels of oxygen, carbon monoxide, hydrogen sulfide, sulfur dioxide or nitrogen dioxide. The unit’s compact size and lightweight (2.5 oz. – 72 grams) allow it to be worn comfortably with a variety of clip attachments, and the top-mounted sensor provides continuous and unobstructed protection even when placed in a shirt pocket. The rugged enclosure is extremely durable and resistant to water and radio frequency interference. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. The large LCD display features a graphical interface and can be set up to show both gas type and direct gas readings (actual ppm or % by volume readout), or just the gas type (Go/No Go display mode). The instrument’s two-button operation allows for easy navigation and setup, which can be password-protected for added security.
|
|
INFICON offers the only man-portable, gas chromatograph/mass spectrometers (GC/MS) proven to provide verifiable data for critical life and death decisions. HAPSITE Smart Chemical Identification Systems deliver fast, dependable on-site analysis of VOCs in air, water, and soil for emergency response, environmental, hazardous waste, industrial hygiene, process monitoring, and medical applications. The HAPSITE Headspace Sampling System supports the HAPSITE Smart Chemical Identification System in detecting and identifying VOCs in water or soil on-site or from another location.
Features at a Glance:
- Results when and where you need them
- Loop or microtrap injection for low detection limits
- Temperature-programmable GC for a wide range of detectable analytes and short analysis times
- Results directly comparable to laboratory analysis
|
|
|
|
|
|
BW Technologies has set a new industry benchmark for a rugged, weatherproof single gas monitor in the new GasAlert Extreme. Starting at $395, the detector provides protection from H2S, SO2, Cl2, CO, HCN, NO2, O2, NH3 or PH3. Ultra-compact and durable, the GasAlert Extreme with an IP66/67 rating offers the most advanced features of any single gas detector on the market today.
GasAlert Extreme features: high-output audible/visual/vibrator alarms; low, high, TWA and STEL alarm settings; a large, alphanumeric LCD with real-time display; auto backlight: “run silent mode” and a built-in concussion-proof boot.
Field-selectable user options enable GasAlert Extreme to be customized to virtually any environment. Calibration due-dates and alarm settings can be configured to meet specific industry requirements. The pass code protect function ensures tamper-proof operation by preventing unauthorized users from accessing calibration options.
Optional data logging, event logging and multiple language options provides more enhanced flexibility. BW Technologies’ MicroDock calibration and test station, currently available for GasAlertMicro multi-gas detectors, will soon be compatible with the GasAlert Extreme for automated calibration, bump testing and record storage.
|
|
|
TAPI manufactures a complete line of ozone analyzers ranging from the sub-ppb level to the lower explosive limit. The 400 Series of analyzers use UV absorption to provide ultra-stable measurements in a wide variety of applications. TAPI also manufactures a complete line of generation devices and photometers for demanding ozone calibrations.
|
|
The Rapidox 4100 electrochemical cell oxygen gas analyser remotely samples oxygen via a high-performance pump. The choice of 4 galvanic cells gives the Rapidox4100 an exceptional dynamic range and provides optimum performance across a diverse range of applications. Versions are available suitable for operating in the presence of high concentrations of hydrogen, helium, hydrogen sulphide and carbon dioxide.
The Rapidox 4100 incorporates a powerful and silent linear piston pump for remote sampling of gas via flexible tubing to the front panel, and a flow gauge allows the user to control the rate of flow. The Rapidox 4100 is fully portable and easy to calibrate using a single point gas.
- Exceptional dynamic range with 4 sensor options
- Measurement range 0.1ppm to 100% oxygen
- Suitable for hydrogen, helium and mild acidic gases
- Full sample control with panel-mounted flow gauge
- Two fully-programmable alarms
|
|
|
|
|
|
The Argweld® Weld Purge Monitor.
Keeps waiting time to a minimum:
The monitor can tell the operator exactly when the oxygen level is low enough to commence welding. No estimating or guesswork is involved, so no time is wasted waiting for the correct level to be reached.
Measures the content of oxygen in the purge gas to indicate when it is safe to carry out a weld.
Saves on excessive use of inert gas:
The exact oxygen content is given, so no more inert gas than necessary has to be used to ensure that the weld will be free of oxidation.
Prevents weld failures:
Premature starts on welds are avoided, high quality is ensured.
Highly portable:
Its small size makes is easy and very convenient to use in all purging situations.
Titanium / Duplex / Stainess Steel:
The MKV monitor can be used to weld Titanium, Duplex and Stainless Steels.
Low cost:
The monitor is available at low relative cost and is a perfect accessory for use with any pipe purging system or argon welding enclosure.
Continuous monitoring of oxygen levels:
A continuous read out of the oxygen level is given, even when welding is taking place. This can avoid unforeseen purge problems that could cause quality failures after the weld has been started.
Calibration and Certification:
Our instrument is supplied calibrated and certificates for Industry Standards are included. Re-calibration is available to operators at any time. Continuous calibration on the front of the instrument is provided.
Extra range:
The MKV monitor indicates Oxygen levels down to 100 parts per million (PPM) 0.01% and measures accurately down to 0.1%.
|
|
|
|
|
|
The Argweld® Titanium Purge Monitor has been specifically designed for indicating oxygen levels in Argon gas for weld purging.
It is believed to be the worlds first purpose designed and built Titanium Weld Purge Monitor.
It measures and clearly indicates actual oxygen levels in parts per million (or percent) down to 10 parts per million, (0.001%), on an alpha-numeric display.
The unit is menu driven by four buttons on the front panel and has an internal alarm with high and low oxygen levels which can be set on the front panel.
A unique new low cost sensor is used which has very little maintenance requirement and tests have shown that is should have up to a five year life.
An optional software package is available to allow a computer to be used to store and print results and graphs etc for quality control purposes.
Titanium Purge Monitor Features:
Small, light, portable and inexpensive.
Automatic fault finding diagnostics.
Measures and indicates down to 10 ppm (0.001%)
Unique fast response sensor with expected 5 year life.
Optional PurgeLog 2000 Software for data acquisition.
Specifically developed for weld purging of titanium.
Low repair, refurbishment and recalibration costs.
Operation with any welding equipment as well as orbital welding equipment and welding enclosures.
Ideal for welding stainless steel in ultra clean applications.
Internal Alarm and security pin code facilities.
Push Button operated menu.
No pump needed and no moving parts to go wrong.
Weld Start/Stop Facility.
|
|
GasCal 1100 Gas Dilution Calibrator
The Ecotech GasCal 1100 Gas Dilution Calibrator performs precise
gas dilution calibrations, ozone analyser precision checks and gas
phase titrations using an optional internal ozone generator. It is
ideal for stand alone use or incorporation into ambient air or emissions
monitoring systems.
• Single and multipoint calibrations can be performed using precise mass flow controllers
• Perform gas phase titrations (U.S. EPA Method) and ozone precision checks using an internal ozone generator (option)
• Parameter setup and output via inbuilt LCD and keypad or an external PC
• External remote control possible via data acquisition system or suitable gas analyser
• Mass flow controller zero stability drift less than 0.6 % full scale per year
• Optional Carry case allowing the GasCal-1100 to be securely carried from location to location
• Optional purge facilitates flushing of calibration gas lines
|
|
Features
- Easy to use hand held 4 or 5 gas analyser
- Declaration of conformity to OIML R99 Class 1
- Certificate of calibration supplied Ideal for emissions diagnostics, tuning and regulated testing
- Measures CO, HC, O2 , CO2 , and Lambda (or AFR)
- Easily upgradeable to NOx or can be ordered as 5 gas analyser AUTO5-1
- Fast warm up time and fast response time with higher output pump
- Internal rechargeable battery; can be charge from AC or vehicle's own 12v supply
- RPM and oil temperature measurements plus accessories
- Prints via optional Infra-red printer
- PC compatible via RS232 for uploading stored data to PC for spreadsheet or graphical analysis and printing
- Complete with protective rubber sleeve, water trap and filter, lap-top style carry case, mains adapter/battery charger, 12v adapter cable, high temperature probe, RPM clamp, oil probe and manual
|
|
|
|
