|
|
|
|
|
|
The DT9837A is a highly accurate USB data acquisition module that is ideally suited for portable noise and vibration measurement and analysis. Four 24-bit IEPE (ICP) sensor inputs are synchronized with a tachometer input to provide data streams that are matched in time for field or laboratory use. A read-back channel from the analog output guarantees perfect correlation of all signals in the input stream, the output stream, and the tachometer.
This rugged small module is self powered via the USB connection to a PC or laptop, no external power supply is needed. This makes it ideal for portable measurement applications. Additionally, two modules can be triggered simultaneously for perfectly synched measurements over eight inputs.
The DT9837A ships with a software applet to get you up and running right out-of-the-box. This applet supports basic operation of the module and can be easily modified for more advanced capabilities using Measure Foundry®, our popular rapid application builder software.
|
|
|
|
|
|
600 Series
Dynamic Signal Analyzer (DSA)
Vibration data acquisition, analysis, and monitoring has never been easier than with the new IOtech 600 Series of dynamic signal analyzers and eZ-Series software. More than 30 years of engineering experience in vibration measurements have gone into the design of the 600 Series of DSAs.
Key Highlights
• Analysis frequency ranges are software programmable from 20 Hz to 40 kHz
• 24-bit Sigma Delta ADC per analog input
• Spurious-free dynamic range of 108 dB (typical)
• AC/DC coupling, software selectable per channel
• TEDS support for accelerometers
• Pseudo-differential input
• Total harmonic distortion of -100 dB (typical)
• Channel-to-channel phase matching of <0.12 degrees at 1 kHz
• 8-bit digital IO port
• USB 2.0 high-speed
640 Models
• 4 analog inputs, ±10V input range (±60V max without damage)
• 2.1 mA IEPE current source per channel (20V compliance)
• 1.0 Hz AC Coupling HPF
• 24-bit Sigma Delta DAC analog output
• Analog outputs: sine, swept sine, random, burst, arbitrary
• Analog output signal-to-noise ratio: 100 dB (typical)
650 Models
• 5 analog inputs, ±40V input range (±60V max without damage)
• 2.1 mA IEPE current source per channels 1-4 (20V compliance)
• 0.1 Hz AC coupling HPF
|
|
|
|
|
|
Vibrocontrol 1500
The new high-performance, budget-friendly solution for simultaneous measurement and monitoring of
• Bearing / casing vibrations
• Rolling-element bearing condition
• Temperature
at 2 measuring points on a machine.
Monitoring of bearing/casing vibration is done in accordance with ISO-Standard 10816. The actual measured values are displayed at the monitoring instrument. Any violation of preset limit values is visually displayed at the monitoring instrument and also signaled via the built-in relays for Alert and Danger alarms.
For determination of the cause of the vibrations, VIBROCONTROL 1500 has the functions
• FFT Analysis of bearing/casing vibrations
• FFT Analysis of the rolling-element bearing condition
Up to 63 VIBROCONTROL 1500 instruments can be networked. Setting of the instruments’ parameters, visualization and assessment is possible both locally and through the Internet.
The condition of the machine can also be interrogated online via www from any PC. Naturally observation of the vibration Trend or Vibration analysis is also possible through this connection.
|
|
Portable online monitoring system
With the OneProd-VMS portable system, all monitoring and diagnosis tools required for rotating machines are available in a suitcase suited for industrial settings. OneProd VMS integrates the OneProd MVX multichannel online monitoring system (see specific data sheet), a set of quick connections and non-interruptible power supply. Also, the system can accommodate a 15” pre-programmed laptop computer, as well as many accessories.
The OneProd VMS system is the ideal tool when a machine that is monitored on a periodic basis only reaches degradation phases that need to be closely followed up and understood.
OneProd VMS is also suited to the characterisation of temporary phenomena related to specific events or operating modes.
Quick to install, the OneProd VMS system is operational at once for complete maintenance diagnoses.
|
|
Adash A4300-VA3 is portable very modern construction one or two channel datacollector and analyser, 1 or 2 plane field balancer. Main features are small dimensions and weight (970 g), large LCD display with high resolution and powerful processor which provides fast data analysis.
Adash A4300-VA3 is determined for bearing condition analysis, lubrication analysis and analyses of mechanical defects of machines unbalance, misalignment, resonance, looseness. Enables to perform any of the FFT, order or time signal analyses. Instrument memory enables archiving of large amount of data. The most important feature is possibility of firmware upgrade via interface RS232. Instrument can work as datacollector or analyser and the switching between these modes is by one button push. There are implemented special methods for measurement of bearing condition, where is low speed bearing included. With software system DDS 2007 is A4300-VA3 instrument very powerful weapon in predictive maintenance.
|
|
Complete Your Monitoring Program With a Reliable Portable
GE's Bently Nevada line features numerous portable instruments designed to measure and collect vibration and other machinery information as part of a predictive maintenance program, for field diagnostics, and for test stand use.
|
|
The T30 is a handheld multimeter for systematic machine condition monitoring as well as for fast spot checks on any rotating part. You can choose the price/performance combination most suitable for your requirements and upgrade at any time.
With the Basic version, measuring results are manually recorded. You measure:
rolling bearing condition (SPM®Method)
vibration severity (ISO recommended)
temperature and rotational speed
The Logger has the same measuring functions plus data logging in connection with the software Condmaster®. It also has a function for continuous recording, up to 50 hours with three transducers simultaneously. You can store comments and manually input any reading from other measuring devices.
In addition, the Expert version provides a powerful vibration analysis with FFT spectrum, fault symptom evaluation and individual presentation of five vibration condition parameters (EVAM®Method).
|
|
Bearing Checker - bearing condition at your fingertips
Small and lightweight, Bearing Checker is a unique instrument designed for swift, on-site condition monitoring of all kinds of ball and roller bearings.
By means of evaluated measurement results, maintenance technicians and mechanics can assess bearing condition and identify sources of potential machine problems without specialized training.
Bearing Checker makes a proactive approach to maintenance economically feasible for everyone. Provide your maintenance personnel with an easy-to-use, cost effective instrument for bearing monitoring.
|
|
|
|
|
|
TopMessage and TopLab are similar devices and differ only in construction design. TopMessage is designed as a rail mounted device. Signals are connected via clamps.
Message devices can be easily integrated into existing company networks via its Ethernet interface. This means anybody within the network can have access to measurement data using their existing PCs.
Delphin's modular Message devices enables the acquisition of any physical values (e.g. temperatures, pressures, flows, vibration data). Measurement values are stored in the devices already scaled and lineated (e.g. bar, liter/sec, m/min, °C etc.). The scaling of thermocouples and RTD sensors are pre-configured.
A device comprises of 1 or 2 I/O modules which can be combined in any way required. Extension devices can be connected to the basic device, each also having 2 I/O modules. This means Message devices are suitable for both small and large applications.
Each analog input can be separately connected with RTD, thermocouple, volt or 20 mA signals. Expensive measuring transducers are no longer required and potential isolation means there is no need for isolating amplifiers. All I/O module analog inputs are set up as differential inputs.
|
|
The Ultraprobe 9000 Kit Complete is a digital ultrasonic inspection, information storage and retrieval system that is so versatile, so easy (most operators are able to use the Ultraprobe 9000 within 15 minutes) and so much fun to operate, you'll be looking for opportunities to use it every day.
Open Platform Software
Interchangeable Modules
Frequency Tuning
Spin and ClickTM Technology
120 dB Dynamic Range
400 Memory Locations record: dB, Frequency, Time, Date, Text, Operation Mode & More
Acoustic Isolating Headphones
Environmentally Friendly Rechargeable Batteries
Superior Application Support
Easy interface for most Vibration Analyzers including: SKF, ENTEK, DLI, CSI, DI
Developed by the Industry Leader in Airborne Ultrasound
|
|
|
Snapshot IS provides intrinsically safe data collection / analysis in a convenient, palm-sized package weighing just 1.5 lbs. (680 grams). With both a phase input and a dynamic signal input, it is the industry's only data collector in this size/weight range that boasts both intrinsically safe operation and the ability to capture not just static readings but waveforms, vectors (for balancing and diagnostics), phase information, and spectra. The instrument uses the Microsoft* Windows* CE operating system, is fully compatible with our System 1® software, and features a user interface consistent with that of its larger 2-channel counterpart, Snapshot CE.
|
|
|
FastTracer is an innovative portable triaxial vibration measurement and analysis solution, ideal to be used in different fields of applications such as predictive and routine maintenance, testing, structural analysis, support to research and development, diagnostics, technical assistance and didactics.
|
|
CF-4220Z - Personal FFT Analyzer
A user friendly instrument that brings the power of FFT analysis within easy reach.
Features:
- Compact, ergonomic design and light weight.
- Easy to read 6.4" LCD
- 20 kHz real-time rate.
- Frequency zoom analysis.
- Built-in sensor power.
- Built-in 3.5" disk drive.
Specifications:
- Number of Input Channels: 1
- Frequency Range: 1 to 40 kHz
- A/D Converter: 16-Bit
- Dynamic Range: 85 dB
- Current Sensor Power: 2 mA
- Operating Temperature: 0 to 40º C
- Dimensions: 200 mm (W) x 292 mm (H) x 396 mm (D)
- Weight: Approximately 5.2 kg
|
|
The most complete and reliable solution for the full spectrum of tightness testing, leak detection and predictive maintenance.
The SDT 170 encompasses our company's vast experience in the fields of ultrasonic leak detection, tightness testing and predictive maintenance. It is robust, lightweight, user friendly and ergonomically designed. It provides a totally efficient, and simple response to proper and effective equipment maintenance and product quality.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
