|
|
|
High-speed accuracy with user friendly set-up and diagnostics. State-of-the-art DSP controlled digital vector commutation optimizes bus voltage for improved speed/torque curves. Flux vector current control improves motor efficiency by providing more torque over the full speed range than is possible with traditional sine drives. Available in 10, 20 or 30 Amp peak ratings (3 sec). Convenient pluggable screw terminal connectors for fast, easy set-up and installation. Set-up software employs a straightforward "control-panel" approach, making it easy to get up and running fast.
|
|
The servo amplifier series ECOVARIO covers a peak power range between 1.4 kW and 7.0 kW. ECOVARIO is suitable for operation of 2- or 3-phase synchronous servo motors, DC motors and EC motors. ECOVARIO offers a large variety of interfaces and functionality. Standardized field bus options such as EtherCAT, CANopen (also interpolated), or Profibus DP ensure a fast system integration. Customer specific enhancements are possible.
New: 2-axes servo amplifier ECOVARIO MiniDual, the cost-optimized PCB solution with a peak power of 2 x 0.45 kW.
|
|
|
|
|
|
IPS210 Intelligent DC / Step Minidrive (2x12 W)
IPS110 Intelligent Control Plug-in Module (25 W)
Embed motion control, drive and PLC functionalities in small units (25 x 50 x 12 mm - IPS110) and (62 x 42 x 20 mm - IPS210). They are easy to integrate in motion control applications where space is critical. IPS110 is the pluggable version of the IPS210.
The IPS digital drives control DC and step motors up to 25 W (45 V, 0.5 A) with very low inductance, in open or closed loop modes. Operable in different stepper control modes, from open loop to closed loop stepless operation with encoder feedback, the drives work in either single-axis, multi-axis or stand-alone configurations.
Key Features:
- Fully digital 0.5 A stepper / 1 A DC brush amplifiers
- Motion controller, drive and PLC functionalities in one unit
- 5 V logic, 12-45 V motor power supply for IPS110
- 8-24 V logic and motor power supply for IPS210
- Programmable digital inputs/ outputs, analog inputs
- Quadrature encoder
- RS-232 and CAN / CANopen
|
|
|
|
|
|
IBL2401 Intelligent Servo Drive
PIM2401 Intelligent Control Plug-in Module
High-performance digital servo drives with embedded intelligence, specially designed for motion control applications where space is dramatically limited.
Based on the latest MotionChip(TM) DSP technology, IBL2401 is a flexible, cost-effective, compact minidrive that controls motors with powers up to 25W.
PIM2401 is the pluggable version of the IBL2401. The plug-in design reduces the time needed to assemble or replace it.
IBL2401 / PIM2401 hardware structures integrate all the basic motor control functions and motion control functionalities on a single module. A series of I/O signals are available for easy interfacing with the application.
Key Features:
- Suitable for brushless, DC brush and step motors
- Motion controller, drive and PLC functionalities in one unit
- 6-24 V logic and motor power supply
- 1 A continuous, 3 A peak current
- Programmable digital inputs / outputs, analog inputs
- Quadrature encoder, Hall sensors or linear Halls
- RS-232 and CAN / CANopen
- Compact design (60 x 44 x 16 mm) for IBL2401
- Plug-in design (49 x 44 x 14 mm) for PIM2401
|
|
Modern systems are often designed in such a way that products can be replaced quickly and without complication. If a high degree of response and accuracy are also required, Lenze%u2019s servo drive systems offer the necessary flexibility. Combined drive controller and servo motor packages featuring perfectly matched components provide solutions for a wide variety of requirements. Compared to mechanical and pneumatic solutions, servo technology is not only more responsive and accurate, but also better value for money and more wear resistant.
|
|
Combines high-speed accuracy with user friendly set-up and diagnostics. State-of-the-art DSP controlled digital vector commutation optimizes bus voltage for improved speed/torque curves. Flux vector current control improves motor efficiency by providing more torque over the full speed range than is possible with traditional sine drives. Set-up software employs a straightforward "control-panel" approach.
|
|
|
|
|
|
IDM240 Intelligent Servo Drive (240 W)
IDM640 Intelligent Servo Drive (640 W)
IDM680 Intelligent Servo Drive (640 W)
The IDMs are fully digital high-precision servo drives with embedded intelligence and a built-in 240 W (IDM240) or 640 W (IDM640 and IDM680) power amplifier. Used to control brushless DC, brushless AC (vector control), DC brush, or 2/3-phase stepping motors, these high-performance intelligent servo drives combine motion controller, power amplifier and PLC functionality in a single, compact unit.
The on-board CAN-bus interface allows these drives to be used as the intelligent axis in a distributed-intelligence, multiple-axis network (up to 256 axes).
Key Features:
- Suitable for brushless, DC brush and step motors
- Motion controller, drive and PLC functionalities in one unit
- 12-48 V logic and 48 V (IDM240) / 80 V (IDM640 & IDM680) motor power supply
- 5 A (IDM240) / 8 A (IDM640 & IDM680) continuous, 16 A peak current
- Opto-isolated programmable digital inputs / outputs and analog inputs
- High resolution up to 256 microsteps / full step
- Quadrature or SSI encoder, digital and linear Hall sensors
- Optional resolver, Sin/Cos encoder (IDM680)
- RS-232 or RS-485 and CAN / CANopen
- Compact design: 136 x 95 x 26 mm
|
|
Servo inverters with four different technology variants and matched synchronous and asynchronous servo motors ensure an ideal solution for every application.
9400 Servo Drives :
- power range 0.37 to 370 kW
- 3 x 400 ... 500 V
- HighLine
- high modularity
- drive-based safety
9300 servo inverters :
- Servo inverters in the power range from 0.37 to 75.0 kW;
- 3 x 400/480 V; 4 technology functions: servo inverter; position controller; cam profiler; register controller
|
|
The Geo Brick Drive brings together the intelligence and capability of the Turbo PMAC2 motion controller with the latest IGBT-based drive technology in a compact, smart 4/6/8 axis servo drive package.
The flexible nature of the Turbo PMAC2 enables the Geo Brick Drive to drive brush, brushless or AC induction motors with unsurpassed pure digital DSP performance. The absence of analog signals— required for typical motion controller/drive interfacing—enables higher gains, better overall performance and tighter integration, while significantly driving costs and setup time down.
|
|
Together with BSH servo motors, Lexium 05 servo drives are compact and dynamic servo drives for machines with various power ranges and diverse supply voltages.
Lexium 05 servo drives:
100…120 V single phase, from 0.4 to 1.4 kW
200…240 V single phase, from 0.75 to 2.5 kW
200…240 V 3-phase, from 0.75 to 3.2 kW
380…480 V 3-phase, from 1.4 to 6 kW
BSH servo motor:
Nominal torque: from 0.5 to 36 Nm
Nominal speed: from 1500 to 8000 rpm
|
|
AC Servo DrivesConfigure Product Selector Documents 3D Models
Our AC servo drives are designed to compliment our wide range of rotary and linear three phase brushless servomotors and offer the broadest connectivity available in the global marketplace today. These drives bring you advanced control technology along with compact packaging and simplified commissioning.
Standard models are available from 300 watts to 58 kW continuous with input voltage ranges from 20 VDC to 480 VAC
|
|
Digital servo controller for three-phase synchronous servo motors with permanent magnets.
- Compact devices for mounting in control cabinets
- Integrated safety technology
- Comprehensive technical functions
- High dynamics and quality of control
- Choice of field bus interfaces: Profibus DP, CANopen, EtherCAT
- Analog and digital inputs and outputs
- Integrated mains filter and ballast circuit
- Direct connection to 230 V or 3 x 400/480 V
|
|
|
|
|
|
As the technology of microprocessor unit becomes more advanced and much further, the development and cost effectivity of permanent magnet manufacturing technology for servo motor and high power and high performance semiconductor power devices is improved continuously. Therefore, AC servo motor and AC servo control system have become the basic techniques for accomplishing automation control technology in current industry field.
Delta servo system is an omnibearing integrated servo system which is based on Delta's strength in industrial and electronic technology and developed for different customers' requirements of various application machine tools. All ASDA series servo drives are provided with a superior digital signal processor (DSP) which represents a high-speed performance of the control circuit loop. Besides, the other features of Delta ASDA series, including gain tuning, smooth motor operation and software analysis / monitor function, also provide high-speed and high-precision motion control for a wide range of industrial automation applications.
|
|
Servo/Motion
MELSERVO - Servo technology that does more
Mitsubishi Electric offers a variety of Servo and Motion system products providing solutions for applications as simple as a single axis point-to-point system through to fully synchonised 96 axis systems.
With both standard pulse type output modules and SSCNET bus modules specific application needs are easy to meet.
The Super Series of Servo motors and amplifiers takes Mitsubishi Motion Control to new levels of precision with a wide range of motors (all fitted with a standard 131,072 absolute encoder) and wide amplifier range (up to 55kW).
All Mitsubishi Servo and Motion system hardware is complimented by a range of software packages allowing easy programming and set-up of the units.
|
|
MELSERVO - Servo technology that does more
Servo Amplifiers: MR-J2S-A, MR-J2S-B und MR-J2S-CL
Mitsubishi offer a wide range of Servo amplifiers to meet the demands of all types of applications. From standard digital pulse and analogue controlled amplifier through to dedicated SSCNET bus type amplifiers, there is a product for all circumstances.
• Real-time autotuning
• Compact design
• Communications capability with RS232/RS485
• Automatic motor type recognition
• Multiple operation mudes (MR-J2S-A)
• Built-in positioning control (MR-J2S-CL)
• 4 different motor types available
Servo Motors: HC-KFS/ HC-MFS/ HC-SFS/ HC-RFS
Mitsubishi Servo Motors are made to high standards and offer a wide range of power, speed and inertia ratings providing a motor for all applications. Ranging from 50W through to 55kW and with specialist type motors available (flat “pancake”motors) the new Super Series Servo Motors complete the line-up of products offered by Mitsubishi Electric.
|
|
AC Servo Motors
Today machines require servo systems that can fully utilise the machin's potential. In response to this Yaskawa has released the Sigma Series, the servo drive product, which completely realises our concept of "compact, quick and simple"
|
|
Shortest cycle time – highest throughput
Better product quality
Less machine wear
Shortest initial set-up time
Lowest lifecycle cost
|
|
|
|
|
|
The main characteristics of SANYO DENKI AC servoamplifiers RS1 are the following:
200VAC to 230VAC Power Supply [+10%; –15%], single-phase or three-phase (configurable by the user), with power sections kept separated for logic/signal and power electronics.
Closed-loop integrated system with Position, Speed and Torque control mode.
Switching Control Mode: it allows a mixed use of digital and analog signals with possibility of “on fly” change: position + speed; position + torque; speed + torque.
Control: with pulse train (clock + direction; forward + backward pulse; 90° phase shift) or with analog signal (proportional to Speed or Torque).
Optically coupled digital control I/O.3 inputs and 2 outputs with user-defined functions.
Integrated management of overtravel signals.
External regenerative resistor provided with sensing for maximum temperature alarm (optional).
Integrated dynamic braking automatic circuit in case of alarm or power off.
Setting time is reduced compared with previous Q Series.
Built-in protection circuits against any overload, input overvoltage and any motor connection error (wrong encoder wiring, phase-phase and phase-ground short-circuit).
|
|
BRUSHLESS SERVODRIVES
MINI MAGNUM 400® (New)
Bushless small package digital servodrive, 380-480 Vac power supply. Driving motor ranges up to 7.5 Nm. Motion controller with CAN BUS fieldbus interface.
MAGNUM 400 ® (New)
Bushless small package digital servodrive, 380-480 Vac power supply. Driving motor ranges up to 32 Nm. Motion controller with CAN BUS fieldbus interface.
MICRO B NET DIGITAL ® (New)
Brushless super-compact digital servodrive, 100-230 Vac power supply. Driving motor ranges up to 7.5 Nm.
MICRO B NET ®
Brushless super-compact, cost effective, analog servodrive. 110-230 Vac power supply. Driving motor ranges up to 7.5 Nm.
MICRO B PLUS ®
Brushless panel mount analog servodrive, 140÷200 VDC power supply . Driving motor range up to 8 Nm.
MICRO B ®
Brushless panel mount analog servoDrive, 60 VDC powersupply. Driving motor range up to 1.5 Nm.
B17 BOX ®
Brushless Standalone digital Servodrive
B17 ®
Brushless Eurocard Servodrive
|
|
DC SERVODRIVES
CD180 ®
Stand alone traditional transistor servodrives for DC brushed servomotors. Driving range up to 30 Nm.
MASTERSPEED ®
Stand alone servodrives for DC brushed servomotors. Driving range up to 15 Nm.
MINISPEED ®
Eurocard formatted servodrives for DC brushed servomotors. Driving range up to 15 Nm.
MICROSPEED ®
Panel mount servodrives for DC Driving range up to 2.7 Nm
|
|
Controllers for DC- motors
ENGEL offers a selection of different servo control amplifiers for operation with all DC motor series. Nearly all application areas are covered simple regulating tasks, which can be handled by a single-quadrant controller such as DR2.0, as well as high-quality dynamic four-quadrant operation implemented with SR63.05 or the digital DSv130.
|
|
Following customer requests, the well-established VOLKSSERVO–Controller RBD 325 was further developed. The outcome is a new controller, which now gives solutions for applications without needing any additional control-elements.
The controller comprises:
• Digital controller in 4-Q-mode and continual transition
• Controlling torque, r.p.m. or positioning
• CAN-communication and RS232
• Technology-adaptation optional, e.g. Profibus-module
• 64 storable positions, integrated control-path
• incremental pick-up - outlet / input
• comfortable parameter software, e.g. oscilloscope-functions
|
|
DC Power Input Sigma-II Series
Range: 10W - 300W
The newly developed DC Powered Sigma-2 servo provides its high quality and advanced functions in a most simple structure for use in clean rooms. Both servomotors and SERVOPACKs are very compact and have abilities equivalent to our high-performance AC servo drive Sigma-2 Series. You can make your battery driven transport systems, such as clean robots and clean AGV (Automatic Guided Vehicle), much more efficient with DC Power Input Sigma-2 Series.
|
|
Intelligent Digital Servo Drives
Our servo drive controllers support AC/DC brush and brushless servo motors with multiple feedback options - including incremental encoder, resolver, analog and digital Halls, analog sin-cos, absolute, tacho and potentiometer feedbacks.
Elmo's SimplIQ digital servo drives combine high power density, intelligent functionality and space-friendly design. The drives integrate Elmo's advanced, SimplIQ motion control core technology, which enables superior control performance, offers advanced programming capabilities and supports standard communication protocols. All the drives in the series include a fully digital motion controller that features current, velocity and position loops and a wide range of commutation types and position feedbacks. The result: higher dynamics and increased precision for a wide variety of implementations.
|
|
|
|
|
|
Servo Dynamics new cost effective SD94S and SD94P Servo Drive Series are full featured with superior performance and power.
SD94S operates straight from the AC line, 120/220/380/460 VAC (nominal) and can produce up to 2.3 kW of continuous power by using the latest algorithms for field-oriented commutation, current, velocity and position loop control.
The SD94P adds networking, motion profiling and execution. SimpleMotion language with Basic-like commands allow the user to program and store motion profiles and multi-axis coordinated moves in the drive to be executed through a network connection or I/O. This compact servo drive operates straight from the AC line, 120/220/380/460 VAC (nominal) and can produce up to 2.3 kW of continuous power.
The Electronic Program Module is ideal for duplicating axis or field service. All configuration and tuning parameters are stored on this module and can be copied using a simple programming device. The SD94S is available with an optional integrated EMI filter as a cost and space saving feature.
The SD94S is UL listed and CE compliant.
|
|
|
|
|
|
Teknic SSt-series Servo Drives, a high-speed DSP control processor controls all of the feedback loops: position, velocity and actual torque. Torque is actively measured and controlled, with losses in the motor effectively minimized. The operation is truly all-digital: the motor currents are converted directly into digital format for the DSP and the outputs to the motor are digital PWM pulse streams-no drift- or noise-prone analog processing is used whatsoever.
The dedicated DSP processor within the SSt servo drive knows, at all times: the state of the position/velocity compensator, the state of the motor's magnetic field, the output voltages of the amplifier, the limit switch inputs, the RMS current in the motor, and numerous other variables. The SSt's proprietary control algorithms are specifically designed to make good use of all this information. The result is superior performance not only in the standard benchmarks (bandwidth, settling time, tracking accuracy), but also in the subjective benchmarks such as quiet jitter-free operation, virtual elimination of overshoot, reduction of torque "chatter", and more. In addition, the DSP's knowledge of the entire state of the servo system enables several unique features. Thousands of hours of computer simulation and experimentation have yielded, among other features: Adaptive Inertia Matching Technology (IMT), Hard-stop homing, fuzzy MoveDone signal false trigger suppression, and continuous current sensor calibration. For more information on these unique features, see the Systems Information section.
|
|
Digital Servo Drive System:
The Fagor servo drive system consists of high technology Sercos digital drives with high speed internal processing utilizing Vector control digital technology which calculate and controls three control loops: position, speed and torque.
- Flexibility of either Analog or Sercos Digital drives
- High Resolution Encoders are incoporated with each motor for velocity feedback.
- Over voltage protection
- Over current protection
- Over speed alarms
- Over temperature alarms
- Hardware alarms
- Drives available for Axes or Spindles
- Direction position feedback: Differential TTL, Vpp, Distance-codes Io or Fagor Absolute Encoders
- Encoder Simultor board (optional)
- Built-in programmable PLC (optional)
- Flexibility of either Modular or Compact systems
- All accessories available
|
|
S200 Configure
Kollmorgen S200 brushless servo drives push high performance servo technology into lower power applications than was previously possible without having to compromise on reliability or package size. Couple a S200 drive with a AKM servomotor for a complete servo control solution designed to excel in applications such as semiconductor fabrication, electronic assembly, packaging, medical, and woodworking equipment.
|
|
|
|
|
|
The AZS servodrives represent the new line of D.Electron digital drives for brushless, linear, torque motors, asynchronous and defluxed synchronous spindles.
The trasducers supported are
Sin-Cos 1Vpp
EnDat (Absolute)
TTL + Hall sensor
It is possibile to connect the AZS servodrives only with the D.Electron CNC (Z32).
The propietary connection protocol permits to obtain the best motion control performaces, expecially for complex applications like interpolating machine tools.
The complete integration between the AZS servodrives and the Z32 CNC has been developed by D.Electron with the goal of inserting all the motion control algorithms inside the Z32 CNC (not inside the drive hardware). With this innovative solution D.Electron has obtained a drastic reduction of electronic hardware inside thr drives, ease of servicing and rump-up and better reliability.
The AZS servodrives dialogates with the Z32 CNC through the propietary digital protocol "Z-Star". The Z-Star link is realized with optical fibre connection, with a maximum switching frequency of 8KHz and a maximum of 32 digital axes controlled by a single Z32 CNC.
|
|
Our drives portfolio offers servoconverters, servomotors and motioncards.
Description for pictured LD 2000 LogiDrive:
The servoconverter LD 2000 permits coping with the requirements of modern motion automation in a most intelligent way:
* compact size
* integrated line filter
* operation of brushless servomotors
* 5 rating class (1.5 A - 20 A)
|
|
|
|
