|
|
Linear Servo Motors
Linear Slides and Stages
Miniature Linear Stages
Belt Driven Linear Actuators
Linear Motor Positioners
Ball Screw and Lead Screw Tables
|
|
SMAC linear slide actuators (Moving Coil Technology) such as LASW20 series are successfully used in high speed bowl feeder & escapement mechanism.
•50,000 cycle/hour
•Can run 24/7
•Units have been in the field for 18 months with no failures
•Life test unit currently at 250,000,000 cycles
SMAC linear slide actuators are also ideal for very demanding applications such as scanning, bottle ejecting, labelling, positioning, gauging and inspection to name but a few.
SMAC provides a comprehensive selection of linear slide actuators. They are fully programmable in force, velocity and position. Standard linear resolution on all SMAC actuators is 5micron with 1micron, 0.5micron and 0.1 micron options available on most models.
|
|
|
|
|
|
MACRON Modular Belt Driven Linear Actuators and Linear Drives are flexible positioning systems consisting of a high speed belt drive and self-supporting, wear resistant aluminum profiles providing precise linear motion in both horizontal and vertical operation.
Superior Performance
MACRON Linear Actuators and Linear Drives are designed for long service life and have been tested at full capacity for thousands of cycles to ensure trouble free operation.
The linear actuator housings are cast from rugged yet lightweight aluminum. The belt drive assembly connects the motor to the actuator with a highly durable steel reinforced polyurethane composite timing belt. Both lightweight and flexible, the belt has an extremely high tensile strength and trapezoidal-shaped teeth. The synchronous, pre-tensioned toothed timing belt to runs two geared pulleys mounted at each end of the actuator profile. One pulley acts as the driving gear, and the other as the driven gear.
A motor coupled to the drive pulley converts rotary torque to tangential force. The belt is available in several widths up to 50mm. This belt drive design offers superior performance over the typical ball screw, lead screw, or acme screw linear actuator including superior rigidity, high moment loads and faster speeds. Travel is limited in length only by the actuator profile itself.
When selecting an actuator, important specifications to consider include length of travel, rated load, positional accuracy and maximum rated speed. MACRON Linear Actuators feature travel up to 500 ft., loads to 10,000 lbs., accuracy to +/- 0.013 and speeds of up to 600 inches per second.
|
|
MODEL SERIES - MTR3L/ MTS3L
LINEAR TRAVEL - 8 / 13 mm & ( 0.03 / 0.04 mm /step )
Design - Mtr3L / MTS3L is a linear synchronous/ stepper motor of the permanent magnet type with two stator windings, for AC / DC supply . Phase displacement of the excitation current is achieved by connecting a capacitor in series with one of the stator windings in synchronous motors. Axial movement is determined by the resulting circular rotating field. Electrical reversal of the axial movement is effected by means of a single-pole changeover switch. The 12pole rotor causes to & fro when motor is energised.
|
|
|
Model GL is a single-axis actuator that allows a ball screw drive or a belt drive to be integrated with an aluminum base on which the LM Guide model GSR is mounted.
|
|
Dynamic with roller guide.
• Max. stroke 5,000 mm
• Max. speed 10 m/s
• Repetition accuracy ±0.1 mm
• Max. feed force 1,500 N
|
|
|
The next generation of belt driven modules, the HPLA expands on the roller wheel bearing design with the addition of high-load capacity steel wheels. The steel wheels significantly increase normal and moment load capacities of this belt driven actuator.
|
|
|
|
|
|
Handling-module, Typ LDH:
Extremely compact linear direct drive module. Components, optimally tuned to each other along with high integration density implemented in the construction of the module, guarantee for high efficiency and easy operator handling.
Drive:
Ironless, electronically commutated 3-phase linear
d. c. motor with permanent magnetic secondary component. Liquid cooling can be connected to the primary component to allow for high force operation performances.
Measuring system:
Incremental measuring system with optic scanning.
Slide:
Exact linear profile slides with recirculation linear ball bearings guarantee for exact operation cycles, torsion resistance and resistance to working stress.
Mounting and attachment options:
Standard dimension bore frames in the sliding component as well as T-grooves in the carrier profile allow high flexibility when attaching the linear drive handling modules to other devices.
Range of application:
Handling and positioning tasks requiring highly dynamic performances, high operating speeds and positioning exactness.
|
|
|
|
|
|
Linear Unit iLD 10, iLD 20 , iLD 16-150 and iLD 16-200
Example iLD 10
The iLD 10 linear units with direct drives are for tasks and applications in the handling area with a favourable price/ performance ratio.
The base is comprised of aluminium profiles with swallowtail design shaped steel guides and internal magnetic tracks with a string potentiometer.
Inside the drive slides are at least 4 ball bearings, adjusted backlash-free, as well as the spool pack with path measuring head. This results in a quiet operation without signal dead range, with high dynamics and movement speed.
Characteristics
* Aluminium linear guide with magnetic track and drive slide with spool pack
* No signal dead range, elimination of mechanical transmission elements
* Higher performance on a smaller scale
* String potentiometer 10 µm
* Guide is stable and twist-proof
* Widely separated guide surfaces of swallowtail shaped strip steel
* Cleanroom-compatible version
* Quiet operation, adjustable backlash-free
* High dynamics with movement speeds of up to 6.0 m/s
* No maintenance or lubrication required
* Profile lengths to 6m
|
|
Electric Ultran High Load Slide
Electric Ultran High Load Slides are the first standard electric models from Bimba Manufacturing.
Provides higher positioning accuracy, smoother operation, and facility for positioning control.
Perfect for addressing high moment loads, high side loads, and processes that require precision positioning.
Footprint similar to the Bimba Ultran High Load pneumatic line.
Available without motors, with DC motors, or with step motors.
Available in two frames, 09 and 17, fine or coarse.
Ball and lead screws are also available.
|
|
Combines a rod screw actuator with a self-contained load guideance and support system. Complete selection of sizes, options and system components. Maximum dynamic thrust capacities range from 125 lbs to 2400 lbs. Standard or oversized guide rods for increased rigidity and lower deflection. Strokes in any incremental length up to 36 inches, depending upon body size selected.
|
|
DL series linear actuators offer the benefits of space-saving design, fast, simple assembly, long life and competitive price. The rigid enclosed aluminum box structure provides a compact envelope that incorporates the linear bearing drive mechanism. Integrating all components into a single unit that includes the motor mount and saves assembly time.
|
|
|
|
|
|
Plug and play: immediately useable
Ratio-Drive® from Hänchen is a self-contained, ready-to-use system solution for practically any application. This high-performance regulated linear drive is the sum of „standardised“ components in combination with the attendant mechatronic services. It is tailored exactly to your needs. As a user the only thing that you have to provide is the hydraulic and electrical supplies.
Independently strong – unbeatable in a team
Without doubt the cylinder is the heart of every Ratio-Drive® system solution. Every user can call on its application as a single cylinder or as several cylinders within a self-contained circuit. In order to be capable of presenting an individual solution in the form of a system, the cylinder requires reliable ”system partners”, as only the practical combination of cylinder, components and mechatronic services can provide an individual and simultaneously effective solution. This includes the mechatronics (every Hänchen cylinder with integrated linear positioning system is a part of a Ratio-Drive® system solution), electronics, the corresponding valves, the control unit and power supply.
|
|
Linear actuators of the "Junior" series are versatile push-rod actuators used mainly for:
diesel engine gas adjustment
metering equipment
points switching
tilting fixtures
operation of shutters
valve and slider operation
and many other applications
|
|
The linear modules MLT320 provide a self-supporting frame (180x60mm) to be easily integrated into the customer’s systems.
They are made of solid aluminium alloy profile with four-rows linear guideways.
The movement is activated through timing belt AT10/32. The standard accessories enable a quick and easy connection with the motors and the columns.
Versatility, performances, high load capacity and self-supporting structure are the key features of our range of linear modules and portals.
|
|
|
High radial loads (over 8000 lbs depending on load carrying options) and moment load capacity with consistent tracking. Heavy duty recirculating bearing system in gothic arch rail guides for wear resistance with repeated accuracy. Strokes in any incremental length up to 292 inches depending on model selected. Travel speeds to 155 in/sec.
|
|
|
High load (over 2000 lbs) and moment load capacity (over 1600 in-lb) with consistent tracking. Features a heavy duty recirculating bearing system in gothic arch rail guides for wear resistance with repeated accuracy. Strokes are available in any incremental length up to 10 feet depending on body size and screw/nut choice.
|
|
|
Minimal deflection and straighter, truer linear motion (within 0.0002 inches per inch). Guidance system uses ground linear rails (and ball bearing blocks) for lowest possible deflection when guiding the carrier and its load. Four body sizes. Strokes in any incremental length up to 96 inches. Travel speeds up to 100 in/sec. Maximum dynamic loads range from 100 lbs to 750 lbs and are based on 200,000,000 linear inches of travel. Removable cover offers easy access to internal components.
|
|
|
HOERBIGER-ORIGA now offers the complete solution for linear drive systems. Designed for absolute reliability, high performance, ease of use and optimised engineering the ORIGA System Plus satisfies even the most demanding applications.
|
|
|
MXE electric screw actuators are available in two bearing selections. Solid bearing design optimizes stress distribution for optimal performance. Profiled rail design uses THK Caged Ball technology to reduce friction and extend actuator life. Maximum loads range from 70 to 1472 lbs depending on options selected. Strokes available in any incremental length up to 120" depending on body size and screw/nut choice.
|
|
|
Offers minimal deflection and straighter, truer linear motion (within 0.0002 inches per inch). Guidance system uses ground linear rails (and ball bearing blocks) for the lowest possible deflection when guiding the carrier and its load. Four body sizes with maximum stroke lengths ranging from 36" to 96" depending on body size and screw/nut choice. Maximum dynamic loads range from 100 lbs to 750 lbs and are based on 200,000,000 linear inches of travel.
|
|
|
Pre-engineered, pre-packaged and ready to install. Load bearing design incorporates precision linear bearings for long life, high load capacity and low friction. One-piece extruded tube housing supports bearing rods to eliminate rod deflection and increase torsional stability. Rigid, torque-resistant, low-profile slide. Loads to 200lbs.
|
|
|
Pre-engineered, load-supporting and fully enclosed slide-style actuator uses a guidance system of recirculating bearings on ground steel shafts for consistent carrier tracking and long life. Patented band retention system with metal-to-metal seal keeps out contaminants. Low-profile, rigid design in one body size. Load weights up to 100 lbs. Strokes available in any incremental length up to 60 inches depending upon screw/nut choice.
|
|
For applications requiring linear movement, SIPCO offers a complete line of TechnoMotion® products. Please contact us for questions regarding our linear movement products, our inventory, or specific applications.
LINEAR ACTUATORS-ACME and Ball Screw
SCREW JACK-ACME and Ball Screw
BELT DRIVE-Precision Belt Pulleys
PRECISION BALL SCREWS-Ground, zero backlash
BALL SCREWS-Rolled Design
|
|
PE 40 SERIES
An electric piston with an alluminium body and a particularly compact and strong architecture, it has a maximum force of 140 N and a standard stroke of up to 35 mm and intermediate strokes on request.
Its GE version is equipped with a builtin encoder to control and manage the stroke of the stem in order to facilitate controlled and self-managed movements.
On request it can be equipped with a two-way encoder.
|
|
LAP25 linear actuator
features:
Load range of LAP series:
Load capacity from 40kg to 2.5 tons
Speed range: the highest speed is 93mm/s
Precision control: multi-point positioning,
The positioning accuracy can reach 0.1mm.
Modularized combination: modularized
Combination with various types of motors
and accessories
Others: self-locking, synchronousness,
easy maintenance, low noise
|
|
|
Compact single axis linear actuators combine high quality NSK ball screws, linear guides and supporting bearings. Achieve maintenance-free operation with K1 Lubrication Units which are built in as a standard feature on these linear actuators. Each linear actuator features corrosion resistant, low-temperature, black chrome plating on the rail and slider. These linear actuators offer simplified design and installation across many industries.
|
|
Linear ServoSlide
Key Features:
· Turn-key solution
· Modular design
· Direct Linear Drive
· High speed and acceleration
· Zero backlash
· Fast settling time
· Long stroke
The Direct Drive Linear Actuator
Linear Servo Slide system is an integrated linear actuator that eliminates wear, friction, backlash and compliances associated with mechanical transmissions, such as ball/lead screws, rack & pinion, belts/pulses and gearboxes.
|
|
|
|
|
|
GB-Series Linear Actuator
ORMEC offers two lines of linear ball screw actuators. Each actuator has a high performance servo motor and has rugged construction to satisfy your automation requirements. There is a single guide model and a dual guide model both are high accuracy and low backlash.
X-Y configurations are also available, if this is what you are looking for contact our factory for more information.
SGB 54 / 72 Series
* Single guide ball screw
* Compact size
* Servo Motor included
* Incremental Rotary Encoder 2000 rrp included
* Limit Switches built in and concealed
* Preload 2%
* Resolution on 10mm is 1.0 µm, computed
* SGB54 - width of 54 mm
* SGB72 - width of 72 mm
* Stroke from 100 mm to 500 mm
DGB 150/ 180 / 200 Series
* Dual guide ball screw
* Strokes from 200 mm to 1200 mm
* Compact size
* Servo Motor included
* Incremental Rotary Encoder 2500 rrp included
* Limit Switches built in and concealed
* Preload 2%
* Resolution on 10mm is 1.0 µm, computed
* SGB54 - width of 54 mm
* SGB72 - width of 72 mm
|
|
|
|
