|
|
LES 4 (LF 4)
Ball Screw Feed Axis
Linear Unit LES 4 with ball screw drive
aluminium shaft profile W 75 x H 75 mm, anodized
clamping surface and profile bottom side plan-milled
2 precision steel shafts Ø 12 h6, material Cf53, hardness 60 ± 2 HRC
aluminium slide blocks WS 5/70, 2 x WS 5/70 (70 mm long) or WS 5/200 (200 mm long), adjustable free of clearance, central lubrication
ball screw pitch 2.5/4/5/10/20 mm
profile sealing by abrasion-resistant sealing lips
aluminium die-cast end plates
2 limit and/or reference switches, repeatability ± 0.02 mm
driving steel collar with sealed angular contact ball
bearings prepared either for flange- mounted direct drive modules or lateral belt drive modules
|
|
The linear modules MLT320 provide a self-supporting frame (180x60mm) to be easily integrated into the customer’s systems.
They are made of solid aluminium alloy profile with four-rows linear guideways.
The movement is activated through timing belt AT10/32. The standard accessories enable a quick and easy connection with the motors and the columns.
Versatility, performances, high load capacity and self-supporting structure are the key features of our range of linear modules and portals.
|
|
|
High radial loads (over 8000 lbs depending on load carrying options) and moment load capacity with consistent tracking. Heavy duty recirculating bearing system in gothic arch rail guides for wear resistance with repeated accuracy. Strokes in any incremental length up to 292 inches depending on model selected. Travel speeds to 155 in/sec.
|
|
|
High load (over 2000 lbs) and moment load capacity (over 1600 in-lb) with consistent tracking. Features a heavy duty recirculating bearing system in gothic arch rail guides for wear resistance with repeated accuracy. Strokes are available in any incremental length up to 10 feet depending on body size and screw/nut choice.
|
|
SBC Linear actuator
The wide range of SBC actuator models allows you to select a specific unit that best suits your needs. Very applicable to Factory Automation and convey system.
High rigidity
High accuracy and high repeatability
The wide range of models (OPEN Type, Close Type)
Drive Unit Compatibility
SS/SB Series
Using an ultra thin SUS stainless cover. Even in long stroke units, no slackness develops in the SUS sealing cover. The compact design and rigid design give more stability and suits the cosmetic requirements of many applications.
|
|
High Accuracy Single Axis Actuator BG Type
NB's BG Type is a compact single axis actuator which integrates a Slide Guide and Precision Ball Screw. BG Type offers compact dimensions, which outperforms conventional positioning tables. This is made possible by a unique "U" shaped Guide Rail and Slide Block which provides multiple functions of a Guide Block and a Ball Screw Nut combined into a single unit. The "U" shaped Guide Rail design offers a high rigid structure resistant to bending. This structural feature allows for integrated frameworks of machinery or equipment. Additionally, the Slide Block contains 4 ball circuits which delivers high load capacity, high accuracy and high rigidity.
|
|
The NB BG type is a compact single axis actuator, which integrates a slide guide and precision ball screw. BG type offers a unique “ U “ shaped guide rail and slide block which provides multiple functions of a guide block and a ball screw nut combined into a single unit.
The slide block contains 4 ball circuits which deliver high load capacity, high rigidity and high accuracy.
|
|
Ball Screw Driven: Ball Guided Units
Danaher Motion's ball screw driven, ball guided positioning slides by Thomson are designed for robust applications that demand high thrust andpayloads with a need for high precision accuracy and stiffness.
Ball Screw Driven: Slide Guided Units
Danaher Motion's ball screw driven, slide guided positioning slides by Thomson are designed for high thrust applications with low cost restrains. They work well in demanding environments with optional washdown protections.
Ball Screw Driven: Wheel Guided Units
These products incorporate an internal, self-lubricating set of plastic bearings in a lightweight aluminum housing. With the use of flexible seals, the slides work well in industrial-grade applications and environments by minimizing the effects of contaminates, ensuring long life.
|
|
| ... products without technical information |
| |
Seal Puller SP 50
Novel tool for the dismounting of oil seals and sealings of all sizes.
The toolkit SP 50 provides a simple method for dismounting rotary shaft seals in a wide variety of applications. It consists of a sliding hammer, 2 extensions and 50 spare screws. With this basic equipment 50 seals can be dismounted.
■ 50 special screws for removing rotary shaft seals
■ 20 spacer sleeves
■ Slide hammer made of steel
■ 2 extensions
|
|
|
|
|
|
Ballend hex keys are far more efficient than a straight hex blade, since they allow quick insertion from a range of angles. Even when working in wide open spaces, a ballend is a real timesaver.
Bondhus® Advantages:
Manufactured from Protanium® Steel.
ProGuard™ corrosion protection
The Bondhex™ case:
Keeps blades ordered by size.
Blades lock tightly in case with a simple twist.
Case can be used in conjunction with blade to increase torque.
Clean, sharp edges
Chamfered tips for fast insertion and full tool engagement in the screw head
Twist-to-Lock case keeps keys organized by size
Sizes are printed on the case, making it easy to locate tools
Cases marked and color coded
Stubby Tools:
Low profile short arm allows entry into tight spots
Smaller inside radius for tight spaces
Ball end tip on long arm for fast insertion or extraction
Stubby hex keys eliminate the need to trim and file the short arm. A trimmed hex key introduces burrs, and still does not have the tight radius of a dedicated Stubby wrench.
Standard hex key can't fit in tight spots
|
|
Ballstar™ Hex Key Sets
Ballstar™ Hex Key Singles
A full line of screwdrivers, T-handles, hex keys, foldups, bits, and accessories
A huge range of lengths, sizes, and packaging options
Available accessories extend the usefulness of these tools
A lifetime warranty further reflects the quality of these tools
|
|
|
|
|
|
The screwdriver handle requires little introduction, since anyone who has ever used a tool, is probably familiar with this handle style already. Like many things, however, the screwdriver handle has recently evolved into a more ergonomic and useful design than anything that existed in the past.
Screwdriver Considerations:
A good choice when low to medium torque is required or the blade is smaller than 3/16 inches.
Protects against blade breakage better than any other handle type.
Allows fast insertion and removal.
Allows spinning with the fingertips.
Reaches areas too restricted for operating a T-Handle.
The utility of the screwdriver handle is greatly extended when mated with a ball end tip.
Bondhus® Advantages:
The handle core is molded from durable plastic, and designed to last a lifetime.
The ergonomic design has a comfortable feel in the hand, even after long periods of use.
A slightly cushioned feel helps to prevent fatigue and improve grip.
Handle and blade torque are matched, to prevent breaking the tip.
Bondhus® screwdriver handles, up to 3/16", can generate a screws full recommended seating torque.
The subtle texture covering the handle provides good grip, even when hands are wet or oily.
Bondhus® handles will not roll off an inclined or vibrating surface.
Protanium® Steel
ProGuard™ dry finish
|
|
|
|
|
|
The screwdriver handle requires little introduction, since anyone who has ever used a tool, is probably familiar with this handle style already. Like many things, however, the screwdriver handle has recently evolved into a more ergonomic and useful design than anything that existed in the past.
Screwdriver Considerations:
A good choice when low to medium torque is required or the blade is smaller than 3/16 inches.
Protects against blade breakage better than any other handle type.
Allows fast insertion and removal.
Allows spinning with the fingertips.
Reaches areas too restricted for operating a T-Handle.
The utility of the screwdriver handle is greatly extended when mated with a ball end tip.
Bondhus® Advantages:
The handle core is molded from durable plastic, and designed to last a lifetime.
The ergonomic design has a comfortable feel in the hand, even after long periods of use.
A slightly cushioned feel helps to prevent fatigue and improve grip.
Handle and blade torque are matched, to prevent breaking the tip.
Bondhus® screwdriver handles, up to 3/16", can generate a screws full recommended seating torque.
The subtle texture covering the handle provides good grip, even when hands are wet or oily.
Bondhus® handles will not roll off an inclined or vibrating surface.
Protanium® Steel
ProGuard™ dry finish
|
|
|
|
|
|
Rotary Pneumatic Vibrators are used on bins and hoppers to avoid bridging or rat holing, as flow aids, as well as for compacting, sorting, dissolving and cleaning applications and for the improvement of material flow on chutes, screens and vibrating tables
Vibration with the OT-type is generated by a turbine with integrated flyweights which rotates on two oversized ball bearings
- Available in 12 different sizes;
- Oil-free operation possible;
- Maintenance-free;
- Low noise level;
- Operating temperature: from -4° F (-20°C) to 250° F (120°C).
In OR Roller Vibrators vibration is generated by a rotor which describes an eccentric movement inside a steel race. OR Roller Vibrators generate very high frequencies and centrifugal forces with low consumption as compared to the force given.
- Available in 8 different sizes;
- Oil-free operation possible;
- Maintenance-free;
- High centrifugal force;
- Low noise level;
- Maximum operating temperature: 390° F (200°C).
S-type Ball Vibrators consist of an anodized aluminium body inside which a steel ball rotates on a specially hardened and ground steel ring.
- Available in 8 different sizes;
- Oil-free operation possible;
- Maintenance-free;
- High centrifugal force;
- Low noise level;
- Operating temperature: from -4° F (-20°C) to 250° F (120°C).
|
|
| ... products without technical information |
| |
TSR and TSR+C Ring / Triple Swivel Ring
Triple articulation allows it to line up perfectly with the sling
Allows the hook to move parallel to the supporting face of the ring being drawn at 90°
Two ways of tightening: either by open-ended spanner, or by Allen key
From M8 to M56 as standard; for loads from 0.3 t to 22 t
From UNC 3/8" to UNC 2" as standard; for loads from 1,200 lbs to 50,000 lbs
Other variants of fitting bolts on request
|
|
The lifting ring for turning operations
The heavy duty lifting rings >WBG-VWBG< have a ball-bearing swivel and are suitable for turning and tilting of loads.
Simple assembly, only one tapped hole is required. Available with different thread lengths.
|
|
The lifting ring for turning operations
The heavy duty lifting rings >WBG-VWBG< have a ball-bearing swivel and are suitable for turning and tilting of loads.
Simple assembly, only one tapped hole is required. Available with different thread lengths.
|
|
Wichard offers a comprehensive range of ball bearing blocks which can be used in various applications*:
> Different sheave diameters: 18, 25, 35, 45 and 70 mm
> For rope size from 4 to 14mm
> Wide choice of fastenings: shackle, snap hook, fixed eye...
> 2 lateral Delrin ball races
> Removable sheave for maintenance
> Sheave protected by cheeks
*: Do not use for Personal Protective Equipment or to hang on people
|
|
Model 522A is a Thermosonic Ball Bonder for wires from 0.7mil (18µm) to 2.0mil (50µm) in diameter featuring HYBOND’s exclusive Soft Touch TM force ramping system. Imitated but never duplicated, the Soft Touch™ system bonds effectively with less trauma to sensitive materials like GaAs and InP. Wire control is provided by a motorized feed system which features front panel adjustment for tail length and a swing away clamp assembly which makes threading wire easier. Front panel controls include independent 1st and 2nd bond dials for U/S, Time & Force as well as a built in work stage temperature controller. The 522A has a proven track record of safe and effective wire bonding worldwide.
Other Ball Bonder models available are the 522A with option 18 (OP-18) for deep access, 522A-40 for deep access and long reach and the 626 with motorized vertical movement and capability to wedge bond, peg bond and bump bond.
Please contact us at mailus@hybond.com for more detailed information.
|
|
|
|
|
|
The OAI Model 2000 may be configured as either an edge-bead exposure tool or a flood exposure system; both configurations are based on a proven, time-tested platform.
The OAI 2000SM Edge-bead Exposure System provides a cost-effective method for edge-bead removal using standard shadow mask technology. Mask and substrate changeover can be accomplished quickly and easily adding to the versatility as well as throughput of this high volume production tool.
The Model 2000 systems include a UV lightsource, intensity controlling power supply and robotic substrate handling subsystem. UV lightsources provide adjustable intensity beams with divergence half-angles of <2.0%. Power supplies are available from 200W to 2,000W. Intensity controller sensors are linked directly to the lightsource for accurate intensity monitoring. The OAI robotic substrate handling system is microprocessor controlled and may be programmed to accommodate a wide variety of substrate sizes. The shadow mask capability enables the user to pattern the top-side of a substrate while being held in very close proximity to the mask. At a separation of 25 microns, these systems are capable of 6 micron resolution.
2000FL Flood Exposure Systems are used to augment and/or enhance the photolithography processes in both production and R&D settings. Applications include photoresist stabilization and modification, image reversal and PCM processes.
|
|
| ... products without technical information |
| |
|
The EMA series of electric actuators are available with Machine Screw and Ball Screw drives . They are suitable for low load, medium duty and high speed applications with dynamic ratings up to 10kN and 5500 mm/min.
|
|
Venture Ball Screw Actuators combine a highly efficient long life Ball Screw with a DC voltage electric motor providing a high performance ready to install electric linear drive system.
Standard strokes 4, 8, 12, 18, 24, 32, 36, and 40 inches (custom lengths available)
30% duty cycle motor rating
Available options;
Clutch
Limit switches
Reed, Hall Effect, Potentiometer and other sensor options
3000 lb static capacity / 1500 lb dynamic compression or tension
Lifetime lubrication
Designed for outdoor use
Compression or tension loads
Trunnion, Clevis, or Tube clamp mounting
High strength steel tube assembly with all-steel load support members
Efficient, long life Ball Screw
12VDC, 24VDC, 36VDC, 90VDC, or 120VDC for use with Rectified 120VAC Gearbox Design
|
|
|
|
|
|
The Eliminator HD™ Heavy Duty ball screw linear actuator provides a strong, durable, and precise linear motion actuator for industrial automation.
The Eliminator HD™ ball screw actuator converts the latest motor technology into high load, high speed, and high accuracy linear motion. Eliminator HD™ replaces hydraulic and pneumatic linear actuators, cams, levers, and linkages, with controllable motion, repeatable position, and easy adjustment.
E-DRIVE Design, Incorporated has shown consistent success in the toughest applications, e.g. High loads, high speeds, high precision, and extreme durability. Precision ball screw systems, tailored for maximum life, load and speed, provide the motion while fully enclosed, thus eliminating contamination related failures. A long bronze nose bearing provides support for the extended piston. Rugged bronze keys in opposing steel slots provide anti-rotation and counter the tangential forces created during high speed, high frequency, and high load operation.
While other actuator designs force a particular motor decision, the Eliminator HD™ is designed to suit virtually any motor, gear box, or gearhead the customer chooses to use. In-line as well as parallel offset configurations are standard with 1:1 and 2:1 synchronous gearbelt ratios available.
Dual, nonferrous dovetail switch tracks provide a simple method of placing and adjusting switches for over travel protection as well as "home" detection. Hall effect type limit switches are available.
|
|
|
|
see the results for the following category : 
