|
|
|
|
|
|
Introducing Pacific Bearing Company’s new line of linear actuator products: The PL series, MT series, and MX series. With the reputation for providing the most innovative the solutions to the most difficult applications, PBC makes no exception with this new line of actuators. All systems are durable, self-lubricating, can handle a number of different working environments and come available with t-slots for easy mounting.
For a highly accurate and low cost solution, the PL series actuators have no substitute. The newly designed, ball-screw driven system eliminates the need for costly belt-driven gear boxes, comes magnetically sealed to work in contaminated environments, and the precision machined aluminum design allows for easy installation and long-lasting durability.
The magnetically sealed, versatile MT series actuators can be integrated into many different applications, horizontal or vertical, contaminated or clean. This belt-driven actuator provides a highly repeatability and high speed capacity with a longer stroke length than ball-screw driven actuators.
With its durable, robust design, the belt-driven MX series actuators can carry a high capacity at speeds up to 5 m/s! Also available in several different applications—both horizontal and vertical—the MX is superb for applications with a greater moment load with its large CAM rollers and is available in a longer stroke length. Making the MX series the actuators for heavy loads at high speeds.
Applications for these products include: automotive, food and beverage, packaging, and medical equipment.
|
|
The BiSlide Belt Drive Assembly consists of a motor/gearbox, mounted 90 degrees to a linear dovetail stage. The motor/gearbox couples to a stainless steel pulley which drives a steel reinforced timing belt.
The belt drive assembly is useful for long travel and high speeds. Speeds as high as 3 meters per second can be achieved using direct drive motors and high powered controllers. For high resolution, gear reduction motors are available. The belt drive’s high efficiency make it an ideal choice for moving light loads at high speed and for continuous duty applications.
The belt driven BiSlide Assembly is available in many length up to 220 inches (5.6 meters). Maximum payload is 260 lb./118 kg. Repeatability is 0.0002”/0.005 mm. Straight-line accuracy is 0.007”/10” length or 0.018 mm/25cm. The coefficient of sliding friction is 0.09. Cross-sectional size is 3.175” (80 mm) x 4” (100 mm)
|
|
|
|
|
|
A BIG LINEAR STEP FORWARD
... for small applications
Hepco's new Profile Driven Unit (PDU) plugs a significant gap in linear motion technology. It is a robust, high performance system designed specifically for applications requiring a cost effective solution to fit into a compact space envelope. Mechanically simple but highly innovative, PDU is very attractively priced and can satisfy the light-load, slow moving application to the more dynamically arduous high speed requirement.
PDU is the product of a marriage between proven belt technology, advanced engineering materials and Hepco's expertise in aluminum profile design. It comprises a slotted profile into which fits a drive belt and carriage. This arrangement effectively seals the unit. But perhaps the most significant element of the PDU system is Hepco's new Herculane® wheel technology.
These wheels run virtually friction-free on the inside surface of the profile providing stable support for the carriage plate. The unit offers extremely low friction and due to the wheel rolling motion will run without the need for any lubrication.
The carriage plate of the PDU is designed to accommodate the mounting of a second PDU unit. In this way a compact, high-performance X-Y system can be quickly and easily created.
|
|
|
Linear guide with wheels with transmission by timing belt, with predisposition for the mounting of a gearbox
|
|
|
Belt-driven DB actuators operate @ 5.1 meters per second (MPS). No lubrication or maintenance. They are ideal for applications where speed is critical such as pick-and-place mechanisms on high speed automation equipment. Travel up to 6 meters, repeatability of +/- 0.025 mm, linear accuracy of +/- 0.083 mm per meter.
|
|
The MLT100 Actuator is suitable for the movement of light loads with very high accelerations and speeds.
The self-supporting structure of the rail, together with the threaded holes on its back side, enables a very easy and quick assembly with low costs.
The 4 rollers trolley is designed to fix the load through four M6 holes.
Key features of MLT 100 Actuator are high performances in acceleration and speed, compact design, silentness and in addition MLT 100 is maintenance-free.
|
|
|
Linear guide with wheels with transmission by timing belt, with predisposition for the mounting of a gearbox
|
|
The linear modules MLT320 provide a self-supporting frame (180x60mm) to be easily integrated into the customer’s systems.
They are made of solid aluminium alloy profile with four-rows linear guideways.
The movement is activated through timing belt AT10/32. The standard accessories enable a quick and easy connection with the motors and the columns.
Versatility, performances, high load capacity and self-supporting structure are the key features of our range of linear modules and portals.
|
|
|
High radial loads (over 8000 lbs depending on load carrying options) and moment load capacity with consistent tracking. Heavy duty recirculating bearing system in gothic arch rail guides for wear resistance with repeated accuracy. Strokes in any incremental length up to 292 inches depending on model selected. Travel speeds to 155 in/sec.
|
|
|
Minimal deflection and straighter, truer linear motion (within 0.0002 inches per inch). Guidance system uses ground linear rails (and ball bearing blocks) for lowest possible deflection when guiding the carrier and its load. Four body sizes. Strokes in any incremental length up to 96 inches. Travel speeds up to 100 in/sec. Maximum dynamic loads range from 100 lbs to 750 lbs and are based on 200,000,000 linear inches of travel. Removable cover offers easy access to internal components.
|
|
For applications requiring linear movement, SIPCO offers a complete line of TechnoMotion® products. Please contact us for questions regarding our linear movement products, our inventory, or specific applications.
LINEAR ACTUATORS-ACME and Ball Screw
SCREW JACK-ACME and Ball Screw
BELT DRIVE-Precision Belt Pulleys
PRECISION BALL SCREWS-Ground, zero backlash
BALL SCREWS-Rolled Design
|
|
Belt Driven Ball: Guided Units
Belt driven, ball guided positioning slides by Danaher Motion are designed for smooth travel in dynamic applications requiring high speed, high acceleration. These families present a long life performance in the midst of acceleration rates up to 40m/sec2.
Belt Units: Slide Guided
Thomson's belt driven, slide guided positioning units by Danaher Motion are perfectly suited for dynamic applications requiring high speed, high acceleration, low maintenance and smooth travel. These low cost guide systems optionally adapt to harsh chemical environments.
Belt Driven: Wheel Guided Units
Thomson's belt driven, wheel guided products from Danaher Motion are designed for dynamic applications demanding high speed, high acceleration but requiring smooth motion with medium to high loads.
|
|
RACO's linear actuators with tooth belt drive or spindle drive for single- and multiple-axis movements, put together for specific requirements with the motor drives required such as RACO's intelligent positioning motor, servomotors or step motors and the amplifier and control units as a system application. Or is may also be integrated into existing systems as individual building blocks.
Technical highlights:
stroke to 9 m
linear speed up to 17 m/s
linear thrust to 20,000 N
positioning accuracy up to 0.08 mm
no energy consumption at stop
accessories and electronic modules of RACO's electric actuators can be integrated
|
|
Basically, the IF is a "belt-driven version of the IS Actuator". By combining the high moment loads of the IS with the speed of the FS, the IF Series has proven itself in providing torsional rigidity, reliability, and high speeds. Here is what the IF Series provides:
* AC Servo Motor
* Maximum stroke length: 2500 mm
* Maximum speed: 1750 mm/sec
* High rigidity base structure
* Double slider option for large moments and overhang
* Highly durable urethane composite timing belt
* High base resistance to torsional deformation
|
|
DESIGN
·Compact, anodic aluminum construction shaped
·Guidance is ensured by a rail cuts 15
integrated.
On this rail a carriage assembled on two moves
shoes with balls with scraping joints, having
each one 4 circuits of recycled balls
·Coefficient of bearing weak and constant, necessary
for the rectilinear transfers from great races, 5800
maximum mm.
·Rates of jusqu’ travel; with 1.2 m/sec.
·Accelerations of more than 10 m/s ².
·Temperature d’ use between 0 and 70°c.
·A brake with power failure 24VCC can be gone up
in option
·Engines step by step or Brushless, can
to be gone up on this range of slides (see table
with the back).
·The transmission of the movement is ensured by a belt
notched 24 AT 5 d’ one developed of 80 mm/tr.
butted of end of the road against proximity detectors likely to be stripped
or other on request are external.
·These motorized modular slides are planned for
to be gone up in table XY.
|
|
| ... products without technical information |
| |
- Stock lengths up to 3 meters
- Custom lengths up to 6 meters
- All steel profile rail for high load capacity
- 50 mm wide steel reinforced belt for heavy loads
- Several motor options available
- Stainless steel available
- T-slots on three sides for mounting and accessories
|
|
|
|
see the results for the following category : 
