|
|
Electric Ultran High Load Slide
Electric Ultran High Load Slides are the first standard electric models from Bimba Manufacturing.
Provides higher positioning accuracy, smoother operation, and facility for positioning control.
Perfect for addressing high moment loads, high side loads, and processes that require precision positioning.
Footprint similar to the Bimba Ultran High Load pneumatic line.
Available without motors, with DC motors, or with step motors.
Available in two frames, 09 and 17, fine or coarse.
Ball and lead screws are also available.
|
|
SMAC linear slide actuators (Moving Coil Technology) such as LASW20 series are successfully used in high speed bowl feeder & escapement mechanism.
•50,000 cycle/hour
•Can run 24/7
•Units have been in the field for 18 months with no failures
•Life test unit currently at 250,000,000 cycles
SMAC linear slide actuators are also ideal for very demanding applications such as scanning, bottle ejecting, labelling, positioning, gauging and inspection to name but a few.
SMAC provides a comprehensive selection of linear slide actuators. They are fully programmable in force, velocity and position. Standard linear resolution on all SMAC actuators is 5micron with 1micron, 0.5micron and 0.1 micron options available on most models.
|
|
Dynamic with roller guide.
• Max. stroke 5,000 mm
• Max. speed 10 m/s
• Repetition accuracy ±0.1 mm
• Max. feed force 1,500 N
|
|
|
Parker-Origa now offers the complete solution for linear drive systems. Designed for absolute reliability, high performance, ease of use and optimised engineering the ORIGA System Plus satisfies even the most demanding applications.
|
|
|
MXE electric screw actuators are available in two bearing selections. Solid bearing design optimizes stress distribution for optimal performance. Profiled rail design uses THK Caged Ball technology to reduce friction and extend actuator life. Maximum loads range from 70 to 1472 lbs depending on options selected. Strokes available in any incremental length up to 120" depending on body size and screw/nut choice.
|
|
Linear ServoSlide
Key Features:
· Turn-key solution
· Modular design
· Direct Linear Drive
· High speed and acceleration
· Zero backlash
· Fast settling time
· Long stroke
The Direct Drive Linear Actuator
Linear Servo Slide system is an integrated linear actuator that eliminates wear, friction, backlash and compliances associated with mechanical transmissions, such as ball/lead screws, rack & pinion, belts/pulses and gearboxes.
|
|
|
|
|
|
GB-Series Linear Actuator
ORMEC offers two lines of linear ball screw actuators. Each actuator has a high performance servo motor and has rugged construction to satisfy your automation requirements. There is a single guide model and a dual guide model both are high accuracy and low backlash.
X-Y configurations are also available, if this is what you are looking for contact our factory for more information.
SGB 54 / 72 Series
* Single guide ball screw
* Compact size
* Servo Motor included
* Incremental Rotary Encoder 2000 rrp included
* Limit Switches built in and concealed
* Preload 2%
* Resolution on 10mm is 1.0 µm, computed
* SGB54 - width of 54 mm
* SGB72 - width of 72 mm
* Stroke from 100 mm to 500 mm
DGB 150/ 180 / 200 Series
* Dual guide ball screw
* Strokes from 200 mm to 1200 mm
* Compact size
* Servo Motor included
* Incremental Rotary Encoder 2500 rrp included
* Limit Switches built in and concealed
* Preload 2%
* Resolution on 10mm is 1.0 µm, computed
* SGB54 - width of 54 mm
* SGB72 - width of 72 mm
|
|
DL series linear actuators offer the benefits of space-saving design, fast, simple assembly, long life and competitive price. The rigid enclosed aluminum box structure provides a compact envelope that incorporates the linear bearing drive mechanism. Integrating all components into a single unit that includes the motor mount and saves assembly time.
|
|
|
|
|
|
Plug and play: immediately useable
Ratio-Drive® from Hänchen is a self-contained, ready-to-use system solution for practically any application. This high-performance regulated linear drive is the sum of „standardised“ components in combination with the attendant mechatronic services. It is tailored exactly to your needs. As a user the only thing that you have to provide is the hydraulic and electrical supplies.
Independently strong – unbeatable in a team
Without doubt the cylinder is the heart of every Ratio-Drive® system solution. Every user can call on its application as a single cylinder or as several cylinders within a self-contained circuit. In order to be capable of presenting an individual solution in the form of a system, the cylinder requires reliable ”system partners”, as only the practical combination of cylinder, components and mechatronic services can provide an individual and simultaneously effective solution. This includes the mechatronics (every Hänchen cylinder with integrated linear positioning system is a part of a Ratio-Drive® system solution), electronics, the corresponding valves, the control unit and power supply.
|
|
Linear actuators of the "Junior" series are versatile push-rod actuators used mainly for:
diesel engine gas adjustment
metering equipment
points switching
tilting fixtures
operation of shutters
valve and slider operation
and many other applications
|
|
ELECTRIC SPINDLE-DRIVE, GEARLESS
> compact
> silent
> metal housing
> self locking
> long-life
> maintenance free
> insulation class I
> thrust up to 2500 N
> certified to EN 60601-1
|
|
|
AGI has a full line of linear actuators, base slides, Magnetically coupled slides, thrusters and pneumatic actuators that provide smooth linear motion due to the precision ball bearings riding on hardened ground shafts. The aluminum body and end blocks contain tapped holes and dowel pin holes for precision mounting or fixturing. The AGSL slide series have a magnetically coupled rodless air cylinder that drives the saddle. AGS series have a built in air cylinder that reduces the overall length or footprint. AGT series thruster slide series are powered by an external air cylinder and have an exclusive dual end plates system to keep the shafts from vibrating. Bore sizes are .75 inch, 1.00 inch, 1.25 inch, and 1.50 inch with strokes from 4 inch to 132 inches long. Polycarbonate composite bearings are also available.
|
|
Linear Motor Actuator
LMS Series (LMS 20, LMS 30, LMS 50)
Specifications Range Across LMS Series
Continuous Force: 21.5 - 252 N
Peak Force: 86 - 920 N
Maximum Velocity: 5 m/s
Maximum Acceleration: 100 m/s²
Maximum Carriage Weight: 0.96 - 2.5 kg
Direct Drive Design.
High Speed.
High Strength Aluminium Profile.
Resolution of 10µm, 5µm, 2µm, 1µm, 0.5µm, 0.1nm, 50nm, 20nm, 5nm, 2.5nm, 1.22nm.
Zero Backlash
Least Maintenance Required
--------------------------------------------
LMSDG Series (LMS 30DG, LMS 50DG, LMS 65DG)
Specifications Range Across LMS DG Series
Continuous Force: 36 - 616 N
Peak Force: 133 - 3040 N
Maximum Velocity: 5 m/s
Maximum Acceleration: 100 m/s²
Maximum Carriage Weight: 1.5 - 11 kg
Maximum Carriage Length: 120 - 540 mm
Direct Drive Design.
High Speed.
High Strength Aluminium Profile.
Resolution of 10µm, 5µm, 2µm, 1µm, 0.5µm, 0.1nm, 50nm, 20nm, 5nm, 2.5nm, 1.22nm.
Zero Backlash
Least Maintenance Required
High Moment Rating
High Load Rating
|
|
Xenus
100-240 VAC Digital CANopen Amplifier for Brushless/Brush Motors
Built-in position sensor (12 µ repeatability)
Moving-rod actuator
Moving-forcer motor
Matched Xenus and Accelnet controllers
High rigidity version with outrigger bearings
No lubricant, internal actuator bearing
Drop-in cylinder replacement
Quiet operation
Food-safe
Holding brake option
|
|
SBC Linear actuator
The wide range of SBC actuator models allows you to select a specific unit that best suits your needs. Very applicable to Factory Automation and convey system.
High rigidity
High accuracy and high repeatability
The wide range of models (OPEN Type, Close Type)
Drive Unit Compatibility
MS/MB Series - Mini Linear Actuator
The MA series is the SBC miniaturized linear drive unit of the same width and height. It's small and compact size package suits many application requirements. The ball screw drive units can utilize varying leads offering stroke speed versatility. The belt drive model, using parabolic RPP-belts, offer high-load, low noise and precision movement.
|
|
Frame Size 2-4 inches, 51-102 mm
Stroke Length 2 – 18 inches, 51-455 mm
Maximum Continuous Force Rating 5300 lbf, 24 kN
Maximum Continuous Torque Rating 107 lbf-in, 12 Nm
Maximum Velocity 25 in/sec, 635 mm/sec
Maximum Motor speed 5000 rpm
|
|
Nook Modular Linear Actuators are flexible positioning systems made of self-supporting and wear resistent aluminum profiles. Modular linear actuators can be used as a single axis solution or assembled for a multitude of gantry XY and XYZ positioning duties including inspection, pick-and-place, assembly or dispensing applications.
NOOK Modular Linear Acuators are fully assembled with either roller bearing, profile rail or V-groove guidance and are driven by a belt, ball screw, acme screw or linear motor. Matched non-driven models are available for system guidance requirements. Over 35 models, each with several available sizes, meet the requirements of guidance, load and speed for precision and commerical linear motion applications.
|
|
Simple solution and economic for small budget:
Cartesian robot 2 axes of modular concept
Race centers X up to 2500 mm
Race centers Y up to 1000 mm
Charge with Maximum with 5 kg
Speed 120 m/s
Precision + 0,1 mm
Engine step by step or brushless with programmable integrated electronics
Entries end of the road and integrated catch of origin
Digital entries and exit TOR available
Communications available: Ethernet/USB/Profibus/RS232/RS485
Position and shifting of speed to the flight
Storage of the programs
Manual or automatic movements
|
|
Moter Free Type
Free Selection Motors of Standard Actuator
Features
Based on KUMI and KUMIKO series, fitted to various motors for various requirements.
Meet to various control making it easy to use.
Optional sensors for all sort of mortors. Free assemblies.
Compact size with light weight.
|
|
Demands for higher speed, enhanced quality and less cost are increasing
more than ever. How to meet these demands quickly is the task
expected of manufacturers now and in the future.
YAMAHA PHASER series is a completely new line up of
high performance single axis robots in which the cost
factor and performance are combined in a desirable
way."YAMAHA PHASER series"is the key word
that in creating the manufacture scene of the
next generation with new value concepts.
|
|
| ... products without technical information |
| |
* Complete, fitted rotary table
* Mechanically and electrically ready for connection
* Hole diameter: 100 mm
* Servo motor ECOSTEP® series 23S
* Reference sensor and holding brake optional
|
|
Frame sizes: 60 mm, 130 mm, 200 mm
Max. speed: 200 r/min (200 mm-type: 110 r/min)
Max. thrust force: 100-4000N
Repetitive positioning accuracy: ±0.004°
Max. permissible torque: 0.9Nm - 50 Nm
Resolution: microstep 0.002-0.04°/step
Power supply: 230V AC for 130 mm/200 mm-type, 24V DC for 60mm-type
Marking: CE, UL and cUL
|
|
DG Series Hollow Rotary Actuators
The ouput table of the hollow rotary actuator allows direct installation of your load.
* Large-Diameter, Hollow Output Table
* Accurate Positioning
* Shorter Positioning Time
* Simple Home Hunting
* RoHS compliant
|
|
|
Technical Description. Motor casing: Deep drawn, corrossion protected. Excitation field: Permanentmagnet. Method of bearing, A-side: Ball bearing. Method of bearing, B-side: Sleeve bearing. Mechanic interface: Output shaft. Electric interface: Leads with connector or tinned leads.
|
|
|
|
see the results for the following category : 
