|
|
Encompassing all the benefits of the proven Hepco principle, the Driven Linear System is a complete mechanical drive package incorporating a rigid aluminium beam with fitted guidance system. These quality compact belt driven units have many useful features and can be used singularly or easily incorporated into X-Y-Z systems, in turn, offering a reduced engineering solution at a competitive price.
• Systems up to 8 metres in one length
• Hardened and precision ground slide
• Polyurethane steel reinforced belt for minimum stretch and high speed operation
• High capacity cap sealed bearings for long life system
• Compact motor mounting flange option
• Removable carriage platform for secondary machining
• Suitable for use with a wide range of motors
• Reduced engineering package
• Available with motor and controller package
|
|
The dry-running, maintenance-free spindle lift tables are equipped with iglidur® bearings and permit a multitude of different combinations of materials for the spindles, housings and shafts. Thus the igus® spindle linear systems can be optimized for your special application with regard to weight, costs and installation space.
DryLin® toothed belt axes have been developed for the quick positioning of small loads. The linear units with toothed belt drive are corrosion resistant, light and compact, besides having a low mass inertia due to low deadweight of guide and carriage.
|
|
With an integrated tooth belt drive, MINIMODULE is a highly precise and compact solution for positioning and motion challenges. Based on our MINIRAIL Guideways, sizes 9, 15 and 42, the MINIMODULE excels with its unique, compact design of minimal integrated parts. With MINIMODULE, you receive the same advantages of the SCHNEEBERGER MINIRAIL in the form of a module: high stiffness, corrosion resistant materials as standard and the lowest overall height on the market. MINIMODULE also offers a superior cost-performance ratio.
|
|
Linear axis of the line AXC are equipped with variable guiding- and drive- systems:
- THK linear guides with caged ball technology for highest load capacity at speeds up to 8 m/s as well as long-term maintenance-free operation.
- Maintenance-free roller guide system for middle loads and speeds up to 10 m/s.
- Preloaded and maintenance-free toothed belt for high speed use (10 m/s).
- High stiffness in the drive system and shortest positioning time by ball screw drive in the line AXC.
Linear axis of the line AXC are equipped with variable guiding- and drive- systems.
|
|
The linear actuators are integrated modular systems containing all the components required for operation.
The guidance systems in these linear actuators are based on linear ball bearing and guideway assemblies of series KUE, KUVE or KUSE or on track roller guidance systems of series LF or plain guidance systems. These are driven by means of a ball screw drive, toothed belt or direct drive (linear motor).
|
|
1/2 through 250 ton actuators to choose from. Housings are constructed of a durable aluminum alloy up to 1 ton and ductile iron / steel alloy for higher tonnage linear actuators. Load screws are precision formed of high strength steel to provide optimal performance. Gear nuts are high alloy bronze for exceptional wear and are supported by tapered roller bearing to provide both axial / side support. Complete systems designs and CAD drawings provided.
|
|
|
Linear guide with wheels with traction by chain, with predisposition for the mouting of a gearbox. Right to lift big load.
|
|
- Available with either built in ball screw or drive belt
- Short delivery time
- Lightweight
- Highly rigid
- 2D & 3D CAD Drawings
|
|
Rexroth develops its system mecatronic CAMOLINE:
Rexroth proposes a system mecatronic without precedent: This one integrates products which already proved reliable in many fields: Compact linear modules and modules, with drive by ball screw or timing belt, aluminum profiles with parts of assembly and interfaces, of the carts, modules of rotation and pneumatic grippers, the servo-motors with control and controls of axes, as well as cable chains.
From the process of the customer Rexroth has the means placed at its disposal thanks to its technologies '' Drive and Control '': search for solution, studies (mechanisms, automata,...), provisioning, assembly, adjustments, in order to deliver a unit meeting the definite needs for the customer. This one is finally released from all these long and expensive tasks, between the design and the tests. Lastly, maintenance is not remains about it because all the assemblies are carried out with rings of centering which ensure rigidity, precision and perfect interchangeability of the components.
|
|
Linear advance series LF 4
Profiled out of anodic aluminum
Steel trees with utmost precision Ø12 h6 with tapped drillings M5
Sealing of profiled thanks to lip seals out of rubber abrasion resistant
Plates of extrémitées out of vacuum cast aluminum
Series LF
BlueLine series
Series ZF
|
|
|
This driving unit, although compact in size, has a high thrusting force. The moving coil catches the magnetic flux generated by the magnets arranged in the magnet shaft and converts it into the thrusting force efficiently. As this structure requires no frame, it is compact and light weight.
|
|
|
This driving unit, although compact in size, has a high thrusting force. The moving coil catches the magnetic flux generated by the magnets arranged in the magnet shaft and converts it into the thrusting force efficiently. As this structure requires no frame, it is compact and light weight.
|
|
ADVANCED DRIVING... with our new Heavy Duty Driven Linear System
High loads, demanding duty cycles, hostile operating conditions and ease of installation are the criteria around which Hepco's new Heavy Duty Driven Linear System (HDLS) was designed.
The distinct operating benefits which its features provide over conventional re-circulating systems are certainly accentuated by arduous application. Overhead gantries and steel beam drilling machines are typical examples of where our HDLS system excels.
Now this versatile family of Heavy Duty components has been extended to include a new driven option, the Heavy Duty Driven Linear System. This complements the rack and pinion drive option already available. The new addition is a belt-driven system with two bearing options - 64mm diameter for high load applications and 95mm for loads up to 40kN.
High and super high loads
So what does it comprise? The base unit incorporates single edge commercial 'V' slides mounted onto the beam with the slides positioned at the outer beam edges. Between the two slides is a continuous 50mm wide AT20 belt, firmly attached to the moving carriage. And if the application is really tough, a 75mm wide belt can be specified.
|
|
LES 31 (LUB 12)
aluminium shaft profile W 200 x H 173,5 mm, natur eloxiert
clamping surface and profile bottom side plan-milled
2 precision steel shafts Ø16 mm
2 aluminium slide blocks IWS 1, adjustable free of clearance
central lubrication
ball screw spindle Ø25x10/25x20mm
bottom-up mounting on a plane surface by means of thread rails M6
profile sealing by abrasion-resistant sealing lips
2 limit and/or reference switches, repeatability ± 0.02 mm
Profile length L 996,1496,1996 mm
drive motor: IMD86, stepping motor MS 600 HT, DC servo MV 300
|
|
Aluminium profile with midget linear guide LFS-8-1
Clearance-free feed with timing belt feed axis - timing belt ...
|
|
|
Linear guide with wheels with traction with pinion-rack, with predisposition for the mounting of a gearbox
|
|
|
Linear guide with wheels with transmission by timing belt, with predisposition for the mounting of a gearbox
|
|
|
High radial loads (over 8000 lbs depending on load carrying options) and moment load capacity with consistent tracking. Heavy duty recirculating bearing system in gothic arch rail guides for wear resistance with repeated accuracy. Strokes in any incremental length up to 292 inches depending on model selected. Travel speeds to 155 in/sec.
|
|
|
Minimal deflection and straighter, truer linear motion (within 0.0002 inches per inch). Guidance system uses ground linear rails (and ball bearing blocks) for lowest possible deflection when guiding the carrier and its load. Four body sizes. Strokes in any incremental length up to 96 inches. Travel speeds up to 100 in/sec. Maximum dynamic loads range from 100 lbs to 750 lbs and are based on 200,000,000 linear inches of travel. Removable cover offers easy access to internal components.
|
|
These actuators are particularly adapted for applications without rate nor speed. They bring an economic solution and are the tools idéals in adjustment machines, handling, convoying, etc...
- Speed up to 125 mm/s
- Precision of ± 0,5 mm
- Effort of push 2500 NR (3200 NR for the OSP-ESR)
- Protection IP 54
- Race with the mm near up to 2,5 meters out of standard 0,5 meters for the version with stem
- Mechanical Irreversibility
- Reference of the engine with 180°
|
|
Our manufacture of linear modules motorisables is of the type:
- TLM-G: Linear modules on ball guide with drive belt,
- TLM-V: Linear modules on guidance with billesavec drive by ball screw.
On request, following plane and schedule of conditions we carry out all types of specific systems (linear modules X/Y, special carriages GD.)
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
