|
|
With an integrated tooth belt drive, MINIMODULE is a highly precise and compact solution for positioning and motion challenges. Based on our MINIRAIL Guideways, sizes 9, 15 and 42, the MINIMODULE excels with its unique, compact design of minimal integrated parts. With MINIMODULE, you receive the same advantages of the SCHNEEBERGER MINIRAIL in the form of a module: high stiffness, corrosion resistant materials as standard and the lowest overall height on the market. MINIMODULE also offers a superior cost-performance ratio.
|
|
Axis-units
Advantages of WINKEL-axis-units:
- high load capacity, speed and precision
- high dynamic load capacity achieved by steel profiles
- simple, modular and
- less costly design
- better resistant against
- dust and dirt
- less maintenance needed
- short delivery times
|
|
The dry-running, maintenance-free spindle lift tables are equipped with iglidur® bearings and permit a multitude of different combinations of materials for the spindles, housings and shafts. Thus the igus® spindle linear systems can be optimized for your special application with regard to weight, costs and installation space.
DryLin® toothed belt axes have been developed for the quick positioning of small loads. The linear units with toothed belt drive are corrosion resistant, light and compact, besides having a low mass inertia due to low deadweight of guide and carriage.
|
|
|
This driving unit, although compact in size, has a high thrusting force. The moving coil catches the magnetic flux generated by the magnets arranged in the magnet shaft and converts it into the thrusting force efficiently. As this structure requires no frame, it is compact and light weight.
|
|
Encompassing all the benefits of the proven Hepco principle, the Driven Linear System is a complete mechanical drive package incorporating a rigid aluminium beam with fitted guidance system. These quality compact belt driven units have many useful features and can be used singularly or easily incorporated into X-Y-Z systems, in turn, offering a reduced engineering solution at a competitive price.
• Systems up to 8 metres in one length
• Hardened and precision ground slide
• Polyurethane steel reinforced belt for minimum stretch and high speed operation
• High capacity cap sealed bearings for long life system
• Compact motor mounting flange option
• Removable carriage platform for secondary machining
• Suitable for use with a wide range of motors
• Reduced engineering package
• Available with motor and controller package
|
|
|
Linear guide with wheels with traction by chain, with predisposition for the mouting of a gearbox. Right to lift big load.
|
|
1/2 through 250 ton actuators to choose from. Housings are constructed of a durable aluminum alloy up to 1 ton and ductile iron / steel alloy for higher tonnage linear actuators. Load screws are precision formed of high strength steel to provide optimal performance. Gear nuts are high alloy bronze for exceptional wear and are supported by tapered roller bearing to provide both axial / side support. Complete systems designs and CAD drawings provided.
|
|
The linear actuators are integrated modular systems containing all the components required for operation.
The guidance systems in these linear actuators are based on linear ball bearing and guideway assemblies of series KUE, KUVE or KUSE or on track roller guidance systems of series LF or plain guidance systems. These are driven by means of a ball screw drive, toothed belt or direct drive (linear motor).
|
|
With camoLINE you can combine different drive technologies within one application to build a handling system that precisely meets your needs.
The core components of the building system are:
* Electric linear axes CKK and CKR
* Pneumatic mini slides MSC
* Rotary compact modules RCM and grippers GSP
* Standardized, positive-locking connection elements
* Standardized system for cable drag chain installation
* Servo motors and stepping motors with matching controllers
* Kit for connection to base frame
* Aluminum profiles for constructing frames
The special benefit is: With its positive-locking connections, the building system offers very high accuracy - and takes a lot of the effort out of design, installation and start-up.
Ready-assembled multiple-axis systems available.
|
|
Linear axis of the line AXC are equipped with variable guiding- and drive- systems:
- THK linear guides with caged ball technology for highest load capacity at speeds up to 8 m/s as well as long-term maintenance-free operation.
- Maintenance-free roller guide system for middle loads and speeds up to 10 m/s.
- Preloaded and maintenance-free toothed belt for high speed use (10 m/s).
- High stiffness in the drive system and shortest positioning time by ball screw drive in the line AXC.
Linear axis of the line AXC are equipped with variable guiding- and drive- systems.
|
|
Linear advance series LF 4
Profiled out of anodic aluminum
Steel trees with utmost precision Ø12 h6 with tapped drillings M5
Sealing of profiled thanks to lip seals out of rubber abrasion resistant
Plates of extrémitées out of vacuum cast aluminum
Series LF
BlueLine series
Series ZF
|
|
|
|
|
|
Mini lifting drive
up to loads 1000 daN
Drive unit with direct current gear motor for easy movement with a low power-on time. Duty rating, max. 20%
Construction with rotating trapezoidal threaded spindle (type "d") or with stationary trapezoidal threaded spindle (type "s")
Different sizes for different areas of application:
- Mini lifting drive MT-10-d 12 volt or 24 volt closed construction up to max. 120 daN
- Mini lifting drive MT-10-s 12 volt or 24 volt open construction up to max. 120 daN
- Lifting drive MT-16-d 0-48 volt closed construction up to max. 1.000 daN
- Mini lifting drive MT-16-s 0-48 volt open construction up to max. 1.000 daN
Numerous accessories and special designs round off the product range:
Electronic limit switch for MT-10-d; MT-10-s, MT-16-d, MT-16-s
- Electrical disconnection during overload and at the end positions
- Housing for electronic limit switch without operating unit
- For direct current 12 volt or 24 volt
- With transformer for alternating current, 230 volt
Additional equipment for MT-10-d; MT-10-s,
- Pivoting console
- Pedestal bearing
Additional equipment for MT-16-d and MT-16-s
- Pedestal bearing MT-30301
- Bearing pin MT-30302
- Pivot bearing MT-30303
|
|
With camoLINE you can combine different drive technologies within one application to build a handling system that precisely meets your needs.
The core components of the building system are:
* Electric linear axes CKK and CKR
* Pneumatic mini slides MSC
* Rotary compact modules RCM and grippers GSP
* Standardized, positive-locking connection elements
* Standardized system for cable drag chain installation
* Servo motors and stepping motors with matching controllers
* Kit for connection to base frame
* Aluminum profiles for constructing frames
|
|
|
This driving unit, although compact in size, has a high thrusting force. The moving coil catches the magnetic flux generated by the magnets arranged in the magnet shaft and converts it into the thrusting force efficiently. As this structure requires no frame, it is compact and light weight.
|
|
|
|
|
|
ADVANCED DRIVING... with our new Heavy Duty Driven Linear System
High loads, demanding duty cycles, hostile operating conditions and ease of installation are the criteria around which Hepco's new Heavy Duty Driven Linear System (HDLS) was designed.
The distinct operating benefits which its features provide over conventional re-circulating systems are certainly accentuated by arduous application. Overhead gantries and steel beam drilling machines are typical examples of where our HDLS system excels.
Now this versatile family of Heavy Duty components has been extended to include a new driven option, the Heavy Duty Driven Linear System. This complements the rack and pinion drive option already available. The new addition is a belt-driven system with two bearing options - 64mm diameter for high load applications and 95mm for loads up to 40kN.
High and super high loads
So what does it comprise? The base unit incorporates single edge commercial 'V' slides mounted onto the beam with the slides positioned at the outer beam edges. Between the two slides is a continuous 50mm wide AT20 belt, firmly attached to the moving carriage. And if the application is really tough, a 75mm wide belt can be specified.
|
|
LES 4 (LF 4)
Ball Screw Feed Axis
Linear Unit LES 4 with ball screw drive
aluminium shaft profile W 75 x H 75 mm, anodized
clamping surface and profile bottom side plan-milled
2 precision steel shafts Ø 12 h6, material Cf53, hardness 60 ± 2 HRC
aluminium slide blocks WS 5/70, 2 x WS 5/70 (70 mm long) or WS 5/200 (200 mm long), adjustable free of clearance, central lubrication
ball screw pitch 2.5/4/5/10/20 mm
profile sealing by abrasion-resistant sealing lips
aluminium die-cast end plates
2 limit and/or reference switches, repeatability ± 0.02 mm
driving steel collar with sealed angular contact ball
bearings prepared either for flange- mounted direct drive modules or lateral belt drive modules
|
|
Maximum speed of 2500 mm/s, maximum acceleration/deceleration of 3 G,load capacity of 120 kg, and maximum stroke of 4 m.
|
|
|
Linear guide with wheels with traction with pinion-rack, with predisposition for the mounting of a gearbox
|
|
The linear module POWER-LINE MLT500 consist in self-supporting modules which enable a very easy and quick installation with low costs.
They are made of solid light alloy profile with four-rows linear guideways.
The movement is activated through hardened steel made rack and pinion: high positioning precision and safe displacement of the trolley are ensured.
Replaceable oil cartridges on the guideways (optionals) allow long lasting and low maintenance.
Few standard accessories enable quick connections with the columns, the gearmotor and the grippers, avoiding additional mechanical operations.
Versatility, high load capacity, low cost, very short delivery time are the key features of our POWER-LINE MLT500 modules.
|
|
|
Linear guide with wheels with transmission by timing belt, with predisposition for the mounting of a gearbox
|
|
The linear modules MLT320 provide a self-supporting frame (180x60mm) to be easily integrated into the customer’s systems.
They are made of solid aluminium alloy profile with four-rows linear guideways.
The movement is activated through timing belt AT10/32. The standard accessories enable a quick and easy connection with the motors and the columns.
Versatility, performances, high load capacity and self-supporting structure are the key features of our range of linear modules and portals.
|
|
|
High radial loads (over 8000 lbs depending on load carrying options) and moment load capacity with consistent tracking. Heavy duty recirculating bearing system in gothic arch rail guides for wear resistance with repeated accuracy. Strokes in any incremental length up to 292 inches depending on model selected. Travel speeds to 155 in/sec.
|
|
|
Minimal deflection and straighter, truer linear motion (within 0.0002 inches per inch). Guidance system uses ground linear rails (and ball bearing blocks) for lowest possible deflection when guiding the carrier and its load. Four body sizes. Strokes in any incremental length up to 96 inches. Travel speeds up to 100 in/sec. Maximum dynamic loads range from 100 lbs to 750 lbs and are based on 200,000,000 linear inches of travel. Removable cover offers easy access to internal components.
|
|
SBC Linear actuator
The wide range of SBC actuator models allows you to select a specific unit that best suits your needs. Very applicable to Factory Automation and convey system.
High rigidity
High accuracy and high repeatability
The wide range of models (OPEN Type, Close Type)
Drive Unit Compatibility
SS/SB Series
Using an ultra thin SUS stainless cover. Even in long stroke units, no slackness develops in the SUS sealing cover. The compact design and rigid design give more stability and suits the cosmetic requirements of many applications.
|
|
Ball Screw Driven: Ball Guided Units
Danaher Motion's ball screw driven, ball guided positioning slides by Thomson are designed for robust applications that demand high thrust andpayloads with a need for high precision accuracy and stiffness.
Ball Screw Driven: Slide Guided Units
Danaher Motion's ball screw driven, slide guided positioning slides by Thomson are designed for high thrust applications with low cost restrains. They work well in demanding environments with optional washdown protections.
Ball Screw Driven: Wheel Guided Units
These products incorporate an internal, self-lubricating set of plastic bearings in a lightweight aluminum housing. With the use of flexible seals, the slides work well in industrial-grade applications and environments by minimizing the effects of contaminates, ensuring long life.
|
|
|
|
|
|
Plug and play: immediately useable
Ratio-Drive® from Hänchen is a self-contained, ready-to-use system solution for practically any application. This high-performance regulated linear drive is the sum of „standardised“ components in combination with the attendant mechatronic services. It is tailored exactly to your needs. As a user the only thing that you have to provide is the hydraulic and electrical supplies.
Independently strong – unbeatable in a team
Without doubt the cylinder is the heart of every Ratio-Drive® system solution. Every user can call on its application as a single cylinder or as several cylinders within a self-contained circuit. In order to be capable of presenting an individual solution in the form of a system, the cylinder requires reliable ”system partners”, as only the practical combination of cylinder, components and mechatronic services can provide an individual and simultaneously effective solution. This includes the mechatronics (every Hänchen cylinder with integrated linear positioning system is a part of a Ratio-Drive® system solution), electronics, the corresponding valves, the control unit and power supply.
|
|
These units are primarily for lifting or lowering Masses in both Vertical & Horizontal planes. The weight to be lifted is from 250 kg (0.25 Tons) to 150000 kgs. (50 Tons through various Frames of 0.25 T / 0.5T / 2 T / 2.5T / 5T / 10T /20T / 35T / 50T / 100T / 150T (T indicates Tonnage). These units give positive mechanical action, fail proof & Precise Positioning. The Height to be lifted (or) lowered can be upto 3000 MM.
There are two standard speeds available viz., Normal lift & Slow lift. Housing / Shell is made of Nodular (SG Iron) Casting from 2 Ton to 150 Tons. For 0.5 Ton & 1 Ton Models we use Aluminum shells & covers
There are two types viz
Lifting screw rod with the stationary head
Rotating Screw rod and moving NUT. Both types have two further design possibilities of Design A (upward & Design (B) Downward. All the Jacks can be used on sideways (or) angular ways also
|
|
| ... products without technical information |
| |
|
|
