|
|
LoPro® is an actuated linear motion system based on Bishop-Wisecarver’s signature DualVee Motion Technology™, a proven, highly reliable design with over 30 years of field-tested installations.
LoPro provides smooth and quiet motion over long lengths, and offers unsurpassed performance in harsh environments. No other single linear motion system offers the flexibility of belt, chain, lead screw or ball screw actuation, as well as an undriven option. Systems may be mounted or un-mounted. Support beams are available in aluminum or steel to meet application demands and to provide ease of installation.
LoPro linear systems are available in four sizes, and can be built to accommodate virtually any stroke length (stroke is limited only by the method of actuation). With load capacities up to 5,000 lbs. (22,000 N) and speeds in excess of 8 meters per second, LoPro linear systems are suitable for numerous applications.
|
|
A BIG LINEAR STEP FORWARD
... for small applications
Hepco's new Profile Driven Unit (PDU) plugs a significant gap in linear motion technology. It is a robust, high performance system designed specifically for applications requiring a cost effective solution to fit into a compact space envelope. Mechanically simple but highly innovative, PDU is very attractively priced and can satisfy the light-load, slow moving application to the more dynamically arduous high speed requirement.
PDU is the product of a marriage between proven belt technology, advanced engineering materials and Hepco's expertise in aluminum profile design. It comprises a slotted profile into which fits a drive belt and carriage. This arrangement effectively seals the unit. But perhaps the most significant element of the PDU system is Hepco's new Herculane® wheel technology.
These wheels run virtually friction-free on the inside surface of the profile providing stable support for the carriage plate. The unit offers extremely low friction and due to the wheel rolling motion will run without the need for any lubrication.
The carriage plate of the PDU is designed to accommodate the mounting of a second PDU unit. In this way a compact, high-performance X-Y system can be quickly and easily created.
|
|
Introducing Pacific Bearing Company’s new line of linear actuator products: The PL series, MT series, and MX series. With the reputation for providing the most innovative the solutions to the most difficult applications, PBC makes no exception with this new line of actuators. All systems are durable, self-lubricating, can handle a number of different working environments and come available with t-slots for easy mounting.
For a highly accurate and low cost solution, the PL series actuators have no substitute. The newly designed, ball-screw driven system eliminates the need for costly belt-driven gear boxes, comes magnetically sealed to work in contaminated environments, and the precision machined aluminum design allows for easy installation and long-lasting durability.
The magnetically sealed, versatile MT series actuators can be integrated into many different applications, horizontal or vertical, contaminated or clean. This belt-driven actuator provides a highly repeatability and high speed capacity with a longer stroke length than ball-screw driven actuators.
With its durable, robust design, the belt-driven MX series actuators can carry a high capacity at speeds up to 5 m/s! Also available in several different applications—both horizontal and vertical—the MX is superb for applications with a greater moment load with its large CAM rollers and is available in a longer stroke length. Making the MX series the actuators for heavy loads at high speeds.
Applications for these products include: automotive, food and beverage, packaging, and medical equipment.
|
|
- Stock lengths up to 3 meters
- Custom lengths up to 6 meters
- All steel profile rail for high load capacity
- 50 mm wide steel reinforced belt for heavy loads
- Several motor options available
- Stainless steel available
- T-slots on three sides for mounting and accessories
|
|
Complementary to the popular and proven PRT Ring Slides & Track System, DTS is a fully integrated belt-driven track system, and includes a couple of ingenious features amongst its many 'reduced engineering' attributes.
Available in either rectangular or oval format and in two rail sizes (25 and 44), DTS can be supplied as a stand-alone unit in conjunction with the MCS Machine Construction System, or as a sub-assembly on its own bespoke mounting plate. A steel-reinforced timing belt drives an unlimited number of carriages via adjustable pulleys under either continuous or intermittent motion.
Optional features include the Trip Latch mechanism, which disengages the drive from individual carriages which may become impeded, saving the system from damage. Also the Carriage Locking System will be particularly useful during intermittent motion. It locks any number of carriages into a fixed and repeatable position for further operations to take place.
A range of control and sensing operations are available, and the system may be specified with a plain output shaft, fitted AC Geared Motors, or a range of gearboxes for customers' own motors to be added.
|
|
Linear Bearing Low (LBL) Profile Rail Slides
SETCO offers 6 standard sizes of Linear Bearing Low (LBL) profile rail slides; 200, 300, 400, 500, 600 and 800mm slide widths. Linear bearing slides are sometimes referred to as "rail slides" as the bearing units ride on rails. Linear bearing slides offer smooth low friction linear motion in a low profile compact package. Linear slides provide high rigidity and stability and can be applied to applications experiencing heavy loads, moments and high positioning speed applications.
Standard Features:
Precision Class Ball Bearing Units with Bearing Seals
Arranged with Basic Lubrication Manifold and Piping
Base Mounting Holes
Accordion Protectors
Slide Side Protector Plates
Designed for Universal Mounting Attitudes
Ground Steel Plate Stress-Relieved Saddle
Base is Machine Tool Grade Cast Iron Stress-Relieved
and Normalized to Minimize Distortion
Top, Bottom and Side Surfaces are Ground Flat and Parallel
Both Ends of Saddle and Base are Machined
SETCO's Precision Slide Registration Certificate
|
|
• X2 provides very stiff lifting columns for various applications in medical, ergonomical and industrial markets.
• The columns are available with single spindle( S-type), double spindles for low retracted height (D-type) and winch solution with extremely low retracted height (B-type, only pull force). All types are available in different versions for various offset load and extension needs.
• We are very good in customized columns to OEM users and end user with projects from 5 pieces.
|
|
A new range of rod less actuators is designed by SBC for fast and accurate movement in one or multiple axes. All systems are based on aluminium beams with one or two integrated linear guides and one or two saddle plates. The customer can choose between three different drive units.
•Belt driven units for fast movements and economic solutions.
•Ball screw driven units for accurate applications.
•Linear motor driven units for fast and high dynamic solutions.
A big assortment of dimensions and modifications makes it possible to select an actuator that perfectly matches the demands of your application.
The modular design and the broad range of accessories like mounting plates, gearboxes and motors will give a perfect solution to the customers.
|
|
|
Linear guide with wheels with transmission by timing belt, with predisposition for the mounting of a gearbox
|
|
|
Belt-driven DB actuators operate @ 5.1 meters per second (MPS). No lubrication or maintenance. They are ideal for applications where speed is critical such as pick-and-place mechanisms on high speed automation equipment. Travel up to 6 meters, repeatability of +/- 0.025 mm, linear accuracy of +/- 0.083 mm per meter.
|
|
Motorized precision slides PFL / PCL:
- PFL 180 / PFL 230 (integrated linear motor, bellows cover)
- PCL 220 / PCL 270 (integrated linear motor, sheet metal cover)
Motorized precision slides KBS / KCS:
Motorized precision slides with ball bearings
- KBS (with bellows cover)
- KCS (with sheet metal cover)
Motorized precision slides PFS:
Motorized precision slides with carriage bearings
- PFS with ball screw spindle drive
Motorized precision slides MR / MK:
- MR (with cross roller bearings)
- MK (with ball bearings)
Motorized precision slides MS:
- Motorized precision slides with slide bearing
|
|
DESIGN
·Compact, anodic aluminum construction shaped
·Guidance is ensured by a rail cuts 15
integrated.
On this rail a carriage assembled on two moves
shoes with balls with scraping joints, having
each one 4 circuits of recycled balls
·Coefficient of bearing weak and constant, necessary
for the rectilinear transfers from great races, 5800
maximum mm.
·Rates of jusqu’ travel; with 1.2 m/sec.
·Accelerations of more than 10 m/s ².
·Temperature d’ use between 0 and 70°c.
·A brake with power failure 24VCC can be gone up
in option
·Engines step by step or Brushless, can
to be gone up on this range of slides (see table
with the back).
·The transmission of the movement is ensured by a belt
notched 24 AT 5 d’ one developed of 80 mm/tr.
butted of end of the road against proximity detectors likely to be stripped
or other on request are external.
·These motorized modular slides are planned for
to be gone up in table XY.
|
|
Linear guidance are characterized by a great facility of assembly, a broad choice of the load capacities, raised speeds of work, adapted races.
The weak efforts of bearing and suitable dimensions allow one long life of life.
Drives belt notched, ball screw or adaptation engine.
|
|
|
Ideal for applications where space is at a premium.No mechanical connection to the piston. The fully enclosed actuator body prevents contaminants from entering. Air or oil actuated to 100 PSIG. Operation temperature range of 0°F to 170°F. Recommended for magnetically coupled actuator applications requiring end-of-stroke adjustment or shock absorbers.
|
|
Ultran Rodless Slides
The Bimba Ultran rodless slide has two types, UGS-Ultran Slide, Gold coupling strength and USS-Ultran Slide, Silver coupling strength.
Bore sizes are 5/16", 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", and 2".
Options include stroke adjustment (both ends or one end), bumpers (both ends or one end), dowel pin holes for Transition Plates, switch track, and alternate ports (both ends or one end).
Accessories include shock absorbers, stroke adjustments, and stop collars.
Improper mounting of the Ultran slide could result in binding and/or excess breakaway. As a rule of thumb, the end blocks should be mounted flat with no more than 0.30 ° of differential misalignment end-to-end (including both end blocks).
|
|
Electric Ultran High Load Slide
Electric Ultran High Load Slides are the first standard electric models from Bimba Manufacturing.
Provides higher positioning accuracy, smoother operation, and facility for positioning control.
Perfect for addressing high moment loads, high side loads, and processes that require precision positioning.
Footprint similar to the Bimba Ultran High Load pneumatic line.
Available without motors, with DC motors, or with step motors.
Available in two frames, 09 and 17, fine or coarse.
Ball and lead screws are also available.
|
|
SMAC linear slide actuators (Moving Coil Technology) such as LASW20 series are successfully used in high speed bowl feeder & escapement mechanism.
•50,000 cycle/hour
•Can run 24/7
•Units have been in the field for 18 months with no failures
•Life test unit currently at 250,000,000 cycles
SMAC linear slide actuators are also ideal for very demanding applications such as scanning, bottle ejecting, labelling, positioning, gauging and inspection to name but a few.
SMAC provides a comprehensive selection of linear slide actuators. They are fully programmable in force, velocity and position. Standard linear resolution on all SMAC actuators is 5micron with 1micron, 0.5micron and 0.1 micron options available on most models.
|
|
|
Pre-engineered, pre-packaged and ready to install. Load bearing design incorporates precision linear bearings for long life, high load capacity and low friction. One-piece extruded tube housing supports bearing rods to eliminate rod deflection and increase torsional stability. Rigid, torque-resistant, low-profile slide. Loads to 200lbs.
|
|
|
Pre-engineered, load-supporting and fully enclosed slide-style actuator uses a guidance system of recirculating bearings on ground steel shafts for consistent carrier tracking and long life. Patented band retention system with metal-to-metal seal keeps out contaminants. Low-profile, rigid design in one body size. Load weights up to 100 lbs. Strokes available in any incremental length up to 60 inches depending upon screw/nut choice.
|
|
| ... products without technical information |
| |
Rockline® RBP1 Belt Positioner
The Rockline® RBP1 Belt Positioner™ is the simple, reliable solution for problem belts that continuously mistrack to one side of the conveyor. The Belt Positioner works on the return side belt using simple angled rollers mounted in a fixed position to quickly and continuously funnel the belt into the correct path.
The RBP1 Belt Positioner’s innovative design does not rely on a pivoting mechanism to move and steer a wandering belt like conventional tracking units. The RBP1’s two idler rollers are adjusted to the belt and create a funneling action that continuously "positions" the belt into the correct path. Many times in as few as 5 revolutions of the belt the results can be seen. Plus, the idler rollers on the RBP1 make smooth contact with the return side belt’s bottom cover and not on the belt’s edges which can cause excessive wear and damage to the belt.
Installed before the tail pulley, the Belt Positioner keeps the belt centered at its critical loading point. The RBP1 can also be used at the head pulley, before or after the take-up pulley or anywhere on the return beltline where there is a belt tracking problem. It can also be used on reversing belts.
The RBP1 Belt Positioner comes assembled and ready to install. Simply preset the unit for the conveyor structure width, position the unit on the belt and bolt or weld in place. Adjust the rollers to the belt and watch the results.
|
|
Rockline® RMC1 Skirt Clamps provide the cost-effective solution to material spillage problems in your conveyor loading zones. A good material containment system at the loading point reduces conveyor problems and saves cleanup costs. It stops material loss, eliminates safety hazards and reduces wear and premature failure of conveyor components. RMC1 Skirt Clamps are designed for easy installation, quick maintenance and years of service.
RMC1 Skirt Clamps come in a standard 4" (1200mm) length. An optional "Limited Space" (LS) model is available for tight chute configurations or for portable equipment. Also offered is a "Pick-A-Length" (PAL PAK) option for longer length or special length requirements. The RMC1 handles a variety of skirt rubber sizes. It can also be used with a range of skirt rubber thicknesses from 5/16" (8mm) to 3/4" (19mm).
The RMC1 features a no-hassle installation with few parts. First the clamp pins are positioned on the conveyor's skirt board and welded into place. Then the clamp plates are hung on the pins and the clamp bar and the skirt rubber are inserted. And finally, the clamp bar is tack welded to the plates.
All installation and maintenance work can be done safely from the sides of the conveyor. Just tap loose the locking wedges on the clamp pins, reposition the skirt rubber and relock the pins. The rest of the parts interlock so when the pins are unlocked, they remain in place supporting the skirt rubber while maintenance is completed.
|
|
The automatic adjustable product guiding system provides a flexible way to add fast width adjustment for conveyors in a production line.
The system offers quick and easy automatic resetting of product guiding systems in production flows. The effect is increased line efficiency and safe product distribution throughout the line.
The system has a modular design and consists of guide units for the guiding, controls for the control of the guide units and junction boxes for power supply. The system can be linked to the line control system and one control box can control up to 220 guide units.
|
|
|
ERNI offers the industry's widest array of cable housings, strain reliefs and guide elements. These complementary items to the DIN 41612 / IEC 60603-2 connector family are available for all of the popular types including B, C, D, F, H, Q and R and 1/2 sizes. The cable housings offer rear and two sided exit options, with strain relief for wire, jacketed cable or flat cables. The guide elements are available with keying and screw lock features for applications including: edgecards, backplanesm front panel, rear panel and other 19" Eurocard subrack mounting applications
|
|
Richco offers a range of vertical, horizontal mount and tensioning rack card guides. Vertical design keeps boards in place, yet allows easy slide in and slide out. Horizontal guides are available with a funnel entry for easier board insertion, while others come with tension grips, applying spring pressure to hold the board securely in place.
In chassis and rack system applications, PCB access needs to be quick, accurate, safe and easily accessible to avoid damage to the components on board, which need to be utilised without compromising on overall performance.
The wide range of Richco card guides and pullers provide a solution to PCB safety access for when routine installation, maintenance and repair needs to take place. Custom parts are available. Please contact you local Richco office to discuss your requirements.
|
|
The web guide systems from Re spa are designed to eliminate all problems associated with guiding any type of laminate, be it edge or line guide systems.
Thanks to the designers innovation a range of products are now offered giving numerous advantages to the customer:
- Stepping motor driven to give precise proportional movement. Correcting movement is directly proportional to the error and is quickly and accurately controlled.
- Very low maintenance costs.
- Extremely competitive purchase price
|
|
Based on customer need, LEFON presents the latest design of Saw Guide that adopts rugged hard facing to ensure durability and convenient usage. If the pipe is not round, this Saw Guide can also work as rounding clamps to facilitate welding.
Variety of Saw Guide models are available, customized for different OD size tube/pipe.
Tube/Pipe Size Model
1/2" SG050
3/4" SG075
0.840" SG084
1" SG100
1.050" SG105
1.315" SG131
1.5" SG150
1.660"" SG166
1.90" SG190
2" SG200
2.375" SG237
2.5" SG250
2.875" SG287
3" SG300
3.5" SG350
4" SG400
4.5" SG450
|
|
... see all the products in the category
| |