|
|
SMAC linear slide actuators (Moving Coil Technology) such as LASW20 series are successfully used in high speed bowl feeder & escapement mechanism.
•50,000 cycle/hour
•Can run 24/7
•Units have been in the field for 18 months with no failures
•Life test unit currently at 250,000,000 cycles
SMAC linear slide actuators are also ideal for very demanding applications such as scanning, bottle ejecting, labelling, positioning, gauging and inspection to name but a few.
SMAC provides a comprehensive selection of linear slide actuators. They are fully programmable in force, velocity and position. Standard linear resolution on all SMAC actuators is 5micron with 1micron, 0.5micron and 0.1 micron options available on most models.
|
|
Linear ServoSlide
Key Features:
· Turn-key solution
· Modular design
· Direct Linear Drive
· High speed and acceleration
· Zero backlash
· Fast settling time
· Long stroke
The Direct Drive Linear Actuator
Linear Servo Slide system is an integrated linear actuator that eliminates wear, friction, backlash and compliances associated with mechanical transmissions, such as ball/lead screws, rack & pinion, belts/pulses and gearboxes.
|
|
|
|
|
|
GB-Series Linear Actuator
ORMEC offers two lines of linear ball screw actuators. Each actuator has a high performance servo motor and has rugged construction to satisfy your automation requirements. There is a single guide model and a dual guide model both are high accuracy and low backlash.
X-Y configurations are also available, if this is what you are looking for contact our factory for more information.
SGB 54 / 72 Series
* Single guide ball screw
* Compact size
* Servo Motor included
* Incremental Rotary Encoder 2000 rrp included
* Limit Switches built in and concealed
* Preload 2%
* Resolution on 10mm is 1.0 µm, computed
* SGB54 - width of 54 mm
* SGB72 - width of 72 mm
* Stroke from 100 mm to 500 mm
DGB 150/ 180 / 200 Series
* Dual guide ball screw
* Strokes from 200 mm to 1200 mm
* Compact size
* Servo Motor included
* Incremental Rotary Encoder 2500 rrp included
* Limit Switches built in and concealed
* Preload 2%
* Resolution on 10mm is 1.0 µm, computed
* SGB54 - width of 54 mm
* SGB72 - width of 72 mm
|
|
ZIMM – Screw Jack Building Block System
We lift, lower, push and pull loads from 5 to 1000 kN.
* Efficient construction due to our Screw Jack Building Block System - all components compatible
* All components from one supplier saves purchase costs.
* Delivery of pre-mounted units and assembly groups, motors included
* Short delivery times
* Capable of bearing tension and compression loads
* Attractive design
* Stainless spindles and components on request
* Custom components for specialist applications on request.
|
|
|
Pre-engineered, pre-packaged and ready to install. Load bearing design incorporates precision linear bearings for long life, high load capacity and low friction. One-piece extruded tube housing supports bearing rods to eliminate rod deflection and increase torsional stability. Rigid, torque-resistant, low-profile slide. Loads to 200lbs.
|
|
- Available with either built in ball screw or drive belt
- Short delivery time
- Lightweight
- Highly rigid
- 2D & 3D CAD Drawings
|
|
|
High load (over 2000 lbs) and moment load capacity (over 1600 in-lb) with consistent tracking. Features a heavy duty recirculating bearing system in gothic arch rail guides for wear resistance with repeated accuracy. Strokes are available in any incremental length up to 10 feet depending on body size and screw/nut choice.
|
|
|
Minimal deflection and straighter, truer linear motion (within 0.0002 inches per inch). Guidance system uses ground linear rails (and ball bearing blocks) for lowest possible deflection when guiding the carrier and its load. Four body sizes. Strokes in any incremental length up to 96 inches. Travel speeds up to 100 in/sec. Maximum dynamic loads range from 100 lbs to 750 lbs and are based on 200,000,000 linear inches of travel. Removable cover offers easy access to internal components.
|
|
|
Offers minimal deflection and straighter, truer linear motion (within 0.0002 inches per inch). Guidance system uses ground linear rails (and ball bearing blocks) for the lowest possible deflection when guiding the carrier and its load. Four body sizes with maximum stroke lengths ranging from 36" to 96" depending on body size and screw/nut choice. Maximum dynamic loads range from 100 lbs to 750 lbs and are based on 200,000,000 linear inches of travel.
|
|
|
Pre-engineered, load-supporting and fully enclosed slide-style actuator uses a guidance system of recirculating bearings on ground steel shafts for consistent carrier tracking and long life. Patented band retention system with metal-to-metal seal keeps out contaminants. Low-profile, rigid design in one body size. Load weights up to 100 lbs. Strokes available in any incremental length up to 60 inches depending upon screw/nut choice.
|
|
High Accuracy Single Axis Actuator BG Type
NB's BG Type is a compact single axis actuator which integrates a Slide Guide and Precision Ball Screw. BG Type offers compact dimensions, which outperforms conventional positioning tables. This is made possible by a unique "U" shaped Guide Rail and Slide Block which provides multiple functions of a Guide Block and a Ball Screw Nut combined into a single unit. The "U" shaped Guide Rail design offers a high rigid structure resistant to bending. This structural feature allows for integrated frameworks of machinery or equipment. Additionally, the Slide Block contains 4 ball circuits which delivers high load capacity, high accuracy and high rigidity.
|
|
The NB BG type is a compact single axis actuator, which integrates a slide guide and precision ball screw. BG type offers a unique “ U “ shaped guide rail and slide block which provides multiple functions of a guide block and a ball screw nut combined into a single unit.
The slide block contains 4 ball circuits which deliver high load capacity, high rigidity and high accuracy.
|
|
APPLICATIONS
Fifteen year old fruit d’ experiment units SGLT are
already used in many fields:
Manipulator impression with jet d’ ink
Palletizer Drilling of printed circuits
Machines d’ gluing Engraving on plastic
Teaching placement CMS Machines
Special machines Machining
Displacement of heads d’ etc...
CHARACTERISTICS
. Quality ratio/price
. Lifespan
. Good precision of displacement
. Reduced weight: construction in alumini
|
|
Combines a rod screw actuator with a self-contained load guideance and support system. Complete selection of sizes, options and system components. Maximum dynamic thrust capacities range from 125 lbs to 2400 lbs. Standard or oversized guide rods for increased rigidity and lower deflection. Strokes in any incremental length up to 36 inches, depending upon body size selected.
|
|
The linear modules MLT320 provide a self-supporting frame (180x60mm) to be easily integrated into the customer’s systems.
They are made of solid aluminium alloy profile with four-rows linear guideways.
The movement is activated through timing belt AT10/32. The standard accessories enable a quick and easy connection with the motors and the columns.
Versatility, performances, high load capacity and self-supporting structure are the key features of our range of linear modules and portals.
|
|
|
High radial loads (over 8000 lbs depending on load carrying options) and moment load capacity with consistent tracking. Heavy duty recirculating bearing system in gothic arch rail guides for wear resistance with repeated accuracy. Strokes in any incremental length up to 292 inches depending on model selected. Travel speeds to 155 in/sec.
|
|
|
STN 16 with 80mm, 4 versions. RTC-BV: guidance interns by oval piston, Applicability: transport, open-carries, cut, devices of thorough RTC-CG: guidance on compact rail and of high precision, Applicability: average charges in an exiguous space RTC-EG: guidance on rail of high precision and an effective cost, Applicability: RTC-HD with E-Line guidance, to involve not guided objects RTC-HD: guidance on rail of high precision, for the raised loads, Applicability: basic axis for the applications of handling, very high capacity load
|
|
|
GSU Dia. 16 and 25mm. Element of the range Easy-2-Combines. Race until 1000mm, flexibility of adjustment of the race. Small overall dimensions (flat design). Allows a high speed of drive.
|
|
Ultran Rodless Cylinders
The Bimba Ultran rodless cylinder provides one of the highest coupling strengths available. This means it can carry higher loads without causing the piston to uncouple from the carriage.
Bimba also offers two magnetic coupling strength options (Gold and Silver) to suit a wide variety of applications. The Silver option uses two sets of magnets instead of three.
Bore sizes are 5/16", 7/16", 9/16", 3/4", 7/8", 1-1/16", 1-1/4", 1-1/2", and 2".
Bimba offers a model with built-in guides (Ultran Slide) and an unguided unit (Ultran).
Save space and streamline your design with the Bimba Ultran rodless cylinder! Application possibilities include transferring, feeding, door opening, cutting, silk screening and overall length savings.
|
|
Guiding cylinder
with two slide guides
with short slide guide
with safety unit
with slide guide underneath
Technical Information
· ZSS and ZKS have been designed for higher loads.
· By mounting a linear guide way on the bottom side of the cylinder, very high loads and moments can be carried forward
· Maximum stroke 3000 mm, longer on
· ZSS with two guiding carriages and a fitting length just like the ZS standard cylinder
· ZKS with a guiding carriage
|
|
REXMOVER Dia. 16 with 80mm, race of 100 with 9.900mm possible according to the version.
System with compactness for long races at high speed (5M/s).
4 types: guidance internal, polyamide, external or reinforced. Center robust linear drive.
|
|
GSU Dia. 16 and 25mm. Element of the range Easy-2-Combines.
Race until 1000mm, flexibility of adjustment of the race.
Small overall dimensions (flat design). Allows a high speed of drive.
|
|
|
Mechanically jointed rodless cylinder series MY3 provides high functionality with reduced height and length. The uniquely designed piston shape enables reduction of the height and length as well as practical arrangement of the common piping passages, cushion mechanism and positioning mechanism. This has achieved drastic miniaturization and weight reduction.
|
|
A space saving and guided cylinder with no equal. With a sealing system
unlike any other and endless possibilities including true synchronization
of two or more cylinders the ZR is worth a look.
The answer for dirty and dusty environments.
Available with slide or roller guide
Extremely low leakage
Smooth linear movement
High durability and operational reliability
Deliverable with a brake and encoder
Integrated valves if required
|
|
| ... products without technical information |
| |
|
|
