|
|
|
|
|
|
MACRON Modular Belt Driven Linear Actuators and Linear Drives are flexible positioning systems consisting of a high speed belt drive and self-supporting, wear resistant aluminum profiles providing precise linear motion in both horizontal and vertical operation.
Superior Performance
MACRON Linear Actuators and Linear Drives are designed for long service life and have been tested at full capacity for thousands of cycles to ensure trouble free operation.
The linear actuator housings are cast from rugged yet lightweight aluminum. The belt drive assembly connects the motor to the actuator with a highly durable steel reinforced polyurethane composite timing belt. Both lightweight and flexible, the belt has an extremely high tensile strength and trapezoidal-shaped teeth. The synchronous, pre-tensioned toothed timing belt to runs two geared pulleys mounted at each end of the actuator profile. One pulley acts as the driving gear, and the other as the driven gear.
A motor coupled to the drive pulley converts rotary torque to tangential force. The belt is available in several widths up to 50mm. This belt drive design offers superior performance over the typical ball screw, lead screw, or acme screw linear actuator including superior rigidity, high moment loads and faster speeds. Travel is limited in length only by the actuator profile itself.
When selecting an actuator, important specifications to consider include length of travel, rated load, positional accuracy and maximum rated speed. MACRON Linear Actuators feature travel up to 500 ft., loads to 10,000 lbs., accuracy to +/- 0.013 and speeds of up to 600 inches per second.
|
|
MODEL SERIES - MTR3L/ MTS3L
LINEAR TRAVEL - 8 / 13 mm & ( 0.03 / 0.04 mm /step )
Design - Mtr3L / MTS3L is a linear synchronous/ stepper motor of the permanent magnet type with two stator windings, for AC / DC supply . Phase displacement of the excitation current is achieved by connecting a capacitor in series with one of the stator windings in synchronous motors. Axial movement is determined by the resulting circular rotating field. Electrical reversal of the axial movement is effected by means of a single-pole changeover switch. The 12pole rotor causes to & fro when motor is energised.
|
|
|
Model GL is a single-axis actuator that allows a ball screw drive or a belt drive to be integrated with an aluminum base on which the LM Guide model GSR is mounted.
|
|
Dynamic with roller guide.
• Max. stroke 5,000 mm
• Max. speed 10 m/s
• Repetition accuracy ±0.1 mm
• Max. feed force 1,500 N
|
|
|
|
|
|
Handling-module, Typ LDH:
Extremely compact linear direct drive module. Components, optimally tuned to each other along with high integration density implemented in the construction of the module, guarantee for high efficiency and easy operator handling.
Drive:
Ironless, electronically commutated 3-phase linear
d. c. motor with permanent magnetic secondary component. Liquid cooling can be connected to the primary component to allow for high force operation performances.
Measuring system:
Incremental measuring system with optic scanning.
Slide:
Exact linear profile slides with recirculation linear ball bearings guarantee for exact operation cycles, torsion resistance and resistance to working stress.
Mounting and attachment options:
Standard dimension bore frames in the sliding component as well as T-grooves in the carrier profile allow high flexibility when attaching the linear drive handling modules to other devices.
Range of application:
Handling and positioning tasks requiring highly dynamic performances, high operating speeds and positioning exactness.
|
|
|
|
|
|
Linear Unit iLD 10, iLD 20 , iLD 16-150 and iLD 16-200
Example iLD 10
The iLD 10 linear units with direct drives are for tasks and applications in the handling area with a favourable price/ performance ratio.
The base is comprised of aluminium profiles with swallowtail design shaped steel guides and internal magnetic tracks with a string potentiometer.
Inside the drive slides are at least 4 ball bearings, adjusted backlash-free, as well as the spool pack with path measuring head. This results in a quiet operation without signal dead range, with high dynamics and movement speed.
Characteristics
* Aluminium linear guide with magnetic track and drive slide with spool pack
* No signal dead range, elimination of mechanical transmission elements
* Higher performance on a smaller scale
* String potentiometer 10 µm
* Guide is stable and twist-proof
* Widely separated guide surfaces of swallowtail shaped strip steel
* Cleanroom-compatible version
* Quiet operation, adjustable backlash-free
* High dynamics with movement speeds of up to 6.0 m/s
* No maintenance or lubrication required
* Profile lengths to 6m
|
|
DL series linear actuators offer the benefits of space-saving design, fast, simple assembly, long life and competitive price. The rigid enclosed aluminum box structure provides a compact envelope that incorporates the linear bearing drive mechanism. Integrating all components into a single unit that includes the motor mount and saves assembly time.
|
|
|
|
|
|
Plug and play: immediately useable
Ratio-Drive® from Hänchen is a self-contained, ready-to-use system solution for practically any application. This high-performance regulated linear drive is the sum of „standardised“ components in combination with the attendant mechatronic services. It is tailored exactly to your needs. As a user the only thing that you have to provide is the hydraulic and electrical supplies.
Independently strong – unbeatable in a team
Without doubt the cylinder is the heart of every Ratio-Drive® system solution. Every user can call on its application as a single cylinder or as several cylinders within a self-contained circuit. In order to be capable of presenting an individual solution in the form of a system, the cylinder requires reliable ”system partners”, as only the practical combination of cylinder, components and mechatronic services can provide an individual and simultaneously effective solution. This includes the mechatronics (every Hänchen cylinder with integrated linear positioning system is a part of a Ratio-Drive® system solution), electronics, the corresponding valves, the control unit and power supply.
|
|
Linear actuators of the "Junior" series are versatile push-rod actuators used mainly for:
diesel engine gas adjustment
metering equipment
points switching
tilting fixtures
operation of shutters
valve and slider operation
and many other applications
|
|
|
HOERBIGER-ORIGA now offers the complete solution for linear drive systems. Designed for absolute reliability, high performance, ease of use and optimised engineering the ORIGA System Plus satisfies even the most demanding applications.
|
|
|
MXE electric screw actuators are available in two bearing selections. Solid bearing design optimizes stress distribution for optimal performance. Profiled rail design uses THK Caged Ball technology to reduce friction and extend actuator life. Maximum loads range from 70 to 1472 lbs depending on options selected. Strokes available in any incremental length up to 120" depending on body size and screw/nut choice.
|
|
For applications requiring linear movement, SIPCO offers a complete line of TechnoMotion® products. Please contact us for questions regarding our linear movement products, our inventory, or specific applications.
LINEAR ACTUATORS-ACME and Ball Screw
SCREW JACK-ACME and Ball Screw
BELT DRIVE-Precision Belt Pulleys
PRECISION BALL SCREWS-Ground, zero backlash
BALL SCREWS-Rolled Design
|
|
PE 40 SERIES
An electric piston with an alluminium body and a particularly compact and strong architecture, it has a maximum force of 140 N and a standard stroke of up to 35 mm and intermediate strokes on request.
Its GE version is equipped with a builtin encoder to control and manage the stroke of the stem in order to facilitate controlled and self-managed movements.
On request it can be equipped with a two-way encoder.
|
|
|
Compact single axis linear actuators combine high quality NSK ball screws, linear guides and supporting bearings. Achieve maintenance-free operation with K1 Lubrication Units which are built in as a standard feature on these linear actuators. Each linear actuator features corrosion resistant, low-temperature, black chrome plating on the rail and slider. These linear actuators offer simplified design and installation across many industries.
|
|
|
Designed to convert rotary motion into linear motion, Roh'lix Linear Actuators are ideal for positioning operations in all types of machinery. They are available in 5 different sizes from 5 to 200 pounds thrust. Designed for easy installation, Roh'lix Linear Actuators provide up to 100 million inches of travel life with near zero backlash.
|
|
ELECTRIC SPINDLE-DRIVE, GEARLESS
> compact
> silent
> metal housing
> self locking
> long-life
> maintenance free
> insulation class I
> thrust up to 2500 N
> certified to EN 60601-1
|
|
|
AGI has a full line of linear actuators, base slides, Magnetically coupled slides, thrusters and pneumatic actuators that provide smooth linear motion due to the precision ball bearings riding on hardened ground shafts. The aluminum body and end blocks contain tapped holes and dowel pin holes for precision mounting or fixturing. The AGSL slide series have a magnetically coupled rodless air cylinder that drives the saddle. AGS series have a built in air cylinder that reduces the overall length or footprint. AGT series thruster slide series are powered by an external air cylinder and have an exclusive dual end plates system to keep the shafts from vibrating. Bore sizes are .75 inch, 1.00 inch, 1.25 inch, and 1.50 inch with strokes from 4 inch to 132 inches long. Polycarbonate composite bearings are also available.
|
|
Linear Motor Actuator
LMS Series (LMS 20, LMS 30, LMS 50)
Specifications Range Across LMS Series
Continuous Force: 21.5 - 252 N
Peak Force: 86 - 920 N
Maximum Velocity: 5 m/s
Maximum Acceleration: 100 m/s²
Maximum Carriage Weight: 0.96 - 2.5 kg
Direct Drive Design.
High Speed.
High Strength Aluminium Profile.
Resolution of 10µm, 5µm, 2µm, 1µm, 0.5µm, 0.1nm, 50nm, 20nm, 5nm, 2.5nm, 1.22nm.
Zero Backlash
Least Maintenance Required
--------------------------------------------
LMSDG Series (LMS 30DG, LMS 50DG, LMS 65DG)
Specifications Range Across LMS DG Series
Continuous Force: 36 - 616 N
Peak Force: 133 - 3040 N
Maximum Velocity: 5 m/s
Maximum Acceleration: 100 m/s²
Maximum Carriage Weight: 1.5 - 11 kg
Maximum Carriage Length: 120 - 540 mm
Direct Drive Design.
High Speed.
High Strength Aluminium Profile.
Resolution of 10µm, 5µm, 2µm, 1µm, 0.5µm, 0.1nm, 50nm, 20nm, 5nm, 2.5nm, 1.22nm.
Zero Backlash
Least Maintenance Required
High Moment Rating
High Load Rating
|
|
Xenus
100-240 VAC Digital CANopen Amplifier for Brushless/Brush Motors
Built-in position sensor (12 µ repeatability)
Moving-rod actuator
Moving-forcer motor
Matched Xenus and Accelnet controllers
High rigidity version with outrigger bearings
No lubricant, internal actuator bearing
Drop-in cylinder replacement
Quiet operation
Food-safe
Holding brake option
|
|
SBC Linear actuator
The wide range of SBC actuator models allows you to select a specific unit that best suits your needs. Very applicable to Factory Automation and convey system.
High rigidity
High accuracy and high repeatability
The wide range of models (OPEN Type, Close Type)
Drive Unit Compatibility
MS/MB Series - Mini Linear Actuator
The MA series is the SBC miniaturized linear drive unit of the same width and height. It's small and compact size package suits many application requirements. The ball screw drive units can utilize varying leads offering stroke speed versatility. The belt drive model, using parabolic RPP-belts, offer high-load, low noise and precision movement.
|
|
Frame Size 2-4 inches, 51-102 mm
Stroke Length 2 – 18 inches, 51-455 mm
Maximum Continuous Force Rating 5300 lbf, 24 kN
Maximum Continuous Torque Rating 107 lbf-in, 12 Nm
Maximum Velocity 25 in/sec, 635 mm/sec
Maximum Motor speed 5000 rpm
|
|
Nook Modular Linear Actuators are flexible positioning systems made of self-supporting and wear resistent aluminum profiles. Modular linear actuators can be used as a single axis solution or assembled for a multitude of gantry XY and XYZ positioning duties including inspection, pick-and-place, assembly or dispensing applications.
NOOK Modular Linear Acuators are fully assembled with either roller bearing, profile rail or V-groove guidance and are driven by a belt, ball screw, acme screw or linear motor. Matched non-driven models are available for system guidance requirements. Over 35 models, each with several available sizes, meet the requirements of guidance, load and speed for precision and commerical linear motion applications.
|
|
RACO's linear actuators with tooth belt drive or spindle drive for single- and multiple-axis movements, put together for specific requirements with the motor drives required such as RACO's intelligent positioning motor, servomotors or step motors and the amplifier and control units as a system application. Or is may also be integrated into existing systems as individual building blocks.
Technical highlights:
stroke to 9 m
linear speed up to 17 m/s
linear thrust to 20,000 N
positioning accuracy up to 0.08 mm
no energy consumption at stop
accessories and electronic modules of RACO's electric actuators can be integrated
|
|
Basically, the IF is a "belt-driven version of the IS Actuator". By combining the high moment loads of the IS with the speed of the FS, the IF Series has proven itself in providing torsional rigidity, reliability, and high speeds. Here is what the IF Series provides:
* AC Servo Motor
* Maximum stroke length: 2500 mm
* Maximum speed: 1750 mm/sec
* High rigidity base structure
* Double slider option for large moments and overhang
* Highly durable urethane composite timing belt
* High base resistance to torsional deformation
|
|
Simple solution and economic for small budget:
Cartesian robot 2 axes of modular concept
Race centers X up to 2500 mm
Race centers Y up to 1000 mm
Charge with Maximum with 5 kg
Speed 120 m/s
Precision + 0,1 mm
Engine step by step or brushless with programmable integrated electronics
Entries end of the road and integrated catch of origin
Digital entries and exit TOR available
Communications available: Ethernet/USB/Profibus/RS232/RS485
Position and shifting of speed to the flight
Storage of the programs
Manual or automatic movements
|
|
These units are primarily for lifting or lowering Masses in both Vertical & Horizontal planes. The weight to be lifted is from 250 kg (0.25 Tons) to 150000 kgs. (50 Tons through various Frames of 0.25 T / 0.5T / 2 T / 2.5T / 5T / 10T /20T / 35T / 50T / 100T / 150T (T indicates Tonnage). These units give positive mechanical action, fail proof & Precise Positioning. The Height to be lifted (or) lowered can be upto 3000 MM.
There are two standard speeds available viz., Normal lift & Slow lift. Housing / Shell is made of Nodular (SG Iron) Casting from 2 Ton to 150 Tons. For 0.5 Ton & 1 Ton Models we use Aluminum shells & covers
There are two types viz
Lifting screw rod with the stationary head
Rotating Screw rod and moving NUT. Both types have two further design possibilities of Design A (upward & Design (B) Downward. All the Jacks can be used on sideways (or) angular ways also
|
|
Moter Free Type
Free Selection Motors of Standard Actuator
Features
Based on KUMI and KUMIKO series, fitted to various motors for various requirements.
Meet to various control making it easy to use.
Optional sensors for all sort of mortors. Free assemblies.
Compact size with light weight.
|
|
Demands for higher speed, enhanced quality and less cost are increasing
more than ever. How to meet these demands quickly is the task
expected of manufacturers now and in the future.
YAMAHA PHASER series is a completely new line up of
high performance single axis robots in which the cost
factor and performance are combined in a desirable
way."YAMAHA PHASER series"is the key word
that in creating the manufacture scene of the
next generation with new value concepts.
|
|
SMAC linear slide actuators (Moving Coil Technology) such as LASW20 series are successfully used in high speed bowl feeder & escapement mechanism.
•50,000 cycle/hour
•Can run 24/7
•Units have been in the field for 18 months with no failures
•Life test unit currently at 250,000,000 cycles
SMAC linear slide actuators are also ideal for very demanding applications such as scanning, bottle ejecting, labelling, positioning, gauging and inspection to name but a few.
SMAC provides a comprehensive selection of linear slide actuators. They are fully programmable in force, velocity and position. Standard linear resolution on all SMAC actuators is 5micron with 1micron, 0.5micron and 0.1 micron options available on most models.
|
|
|
|
