|
|
Rigid toothed belt axes in 2 sizes. Select and attach drives freely or even with integrated drive and control for easiest initial start-up and wiring. Control directly from SPS(I/O) or over fieldbus.
|
|
Linear Modules are linear motion axes composed of a variety of mechanical, electrical and electronic components. Depending on the model, they come with ball screw, toothed belt, pneumatic, or linear motor drive.
Plug and play offers clear benefits
Thanks to their plug and play design, Linear Modules often provide clear benefits versus customer-built designs made up of individual components, especially in automation and handling applications. Linear Modules are standard solutions, proven many times over in the field. Despite the many predefined parameters, they still offer machine or system designers a considerable degree of freedom. Rexroth supplies its Linear Modules in any desired, millimeter-increment length, anywhere in the world. And user requests for special carriages, corrosion-protected versions, or special motor attachments with mount and coupling or side drive timing belt can be met at any time.
|
|
|
High performance and low costs are the outstanding features of this model range. If individual module or multi system: Depending on customers’ requirements various combinations are possible.
|
|
|
OMiL offers a wide family of pneumatic 2-colonne, 3-colonne and 4-colonne linear drive unit covers a wide travel range from 25-80 mm up to 80-500 mm.
|
|
LME, the high dynamic linear module with maintenance free linear motor for fastest horizontal movements. 2 sizes and standard strokes until 600 mm. ZME, the universal installation of the linear module with standard strokes of 50 and 100 mm. Combination with the compact, ultra fast Pick-&Place.
|
|
Linear Motor Modules
Ready-to-Use - single bearing rail, limit switches, drag-chain, encoder
Environmental - laser-welded bellows, nickel plating
Consult Copley sales representative to specify
a module for your applicaton.
|
|
|
|
|
|
KK-Modules – Linear Modules with ballscrews
The HIWIN linear modules (KK-Modules) are compact positioning axes. The thrust is generated by a ballscrew, which is mounted in a drive flange ready-to-use by a motor. The movement is guided by rolling balls bearings. Various equipment parts and sizes adapt the linear modules to very different tasks and industries.
Modules for positioning tasks – KK-Modules from HIWIN can be used universally and are suitable as ready-to-mount modules for many positioning tasks.
Lean and light – KK-Modules can also be integrated into applications with little space thanks to their compact and lean construction and light weight.
Flexible and adaptable – various servo motors, controllers, special models and accessories make it possible to use the KK modules universally; they can be supplied with or without motor on request.
Modular and multi-dimensional – multiple axes systems can be achieved easily with the KK-Modules.
Adaptable and sturdy – the KK-Modules can be equipped with bellow or sheet metal cover depending on the ambient requirements.
Vacuum model possible
Guide rail and block made of steel with surface corrosion protection
|
|
Achieve design fl exibility through an integration of linear motion components into one unit.
Demonstrates high performance in a wide range of applications, including assembly,
inspection and transporting equipment.
|
|
Two Axes of Motion in One Housing!
Rigid Design Holds Guide Shafts at Both Ends
Deflection Under Heavy Loads is Greatly Reduced
Air Cushions Standard on 1" & 1.5" Bore Sizes
Precision Mounting Surfaces with Tooling Holes for Grippers and Tooling. Custom Faceplates are Available
Heavy Wall Cylinders Built Into Housing
Case Hardened Shafting
Composite Bushings or High Precision Linear Ball Bearings Provide Accurate and Repeatable Motion
Floating Couplers
Pre-Mounted Cable Carriers
Adjustable Shock Absorbers
Optional Threaded Stop Collars for Fine Stroke Adjustment
Dovetail Sensors with Optional "Quick Disconnect"
|
|
High rigidity and flexible fitting by highst precision in manufacturing. Flexibly expanding intermediate positions increase the possibility of applications.
|
|
The whole of the linear modules motorisables:
- Linear Modules on rollers with drive belt,
- Linear Modules on ball guide with drive belt,
- Linear Modules with drive by ball screw.
On request, following plane and schedule of conditions we carry out all types of specific systems (linear modules X/Y, special carriages GD.)
|
|
|
|
|
|
Compact Modules from Rexroth come complete with drive unit and controller. As plug and play solutions, they simplify machine designs and speed up the commissioning process. They cover the entire spectrum of mid-range to high-end assembly and handling applications. These linear motion axes can be supplied with screw drive, belt drive or direct linear motor drive and offer high dynamics, high load capacities, and high rigidity. Especially important for designers: Not only does Rexroth offer its Compact Modules in various sizes and in any desired stroke length, but also with optional extras.
Compact Modules with ball screw drive - CKK
- Maximum Length: up to 2.200 mm
- Maximum Speed: up to 1,3 m/s
- Load Capacities: up to 89.340 N
Compact Modules with toothed belt drive - CKR
- Maximum Length: up to 5.500 mm
- Maximum Speed: up to 5 m/s.
- Load Capacities: up to 56.530 N
Compact Modules with linear motor - CKL
- Maximum Length: up to 2.800 mm
- Maximum Speed: 3 m/s.
- Load Capacities: up to 13.646 N
|
|
These last years the technological exigeances of the linear systems made progress the development of products like the modules BI-RAIL and CP elitec.
These modules or units in advance are characterized by an high degree of flexibility and reliability. 8 sizes are available out of standard of 40 mm to 160 mm of width, the advance is done by means of screw ball or synchronous belt. Double guidance by rails and shoes with balls allows the transport of strong loads, the provision of the double guidance authorizes very important resumptions of couple with a maximum rigidity. The linear systems CP are equipped with a guidance especially studied and developed by Movitec, the advance is done by means of ball screw a great choice of screw pitch is available.
|
|
an electric linear module for Gantries with linear Axes
example: Gantries and systems multi axes
|
|
|
Pre-engineered, pre-packaged and ready to install. Load bearing design incorporates precision linear bearings for long life, high load capacity and low friction. One-piece extruded tube housing supports bearing rods to eliminate rod deflection and increase torsional stability. Rigid, torque-resistant, low-profile slide. Loads to 200lbs.
|
|
| ... products without technical information |
| |
- Stock lengths up to 3 meters
- Custom lengths up to 6 meters
- All steel profile rail for high load capacity
- 50 mm wide steel reinforced belt for heavy loads
- Several motor options available
- Stainless steel available
- T-slots on three sides for mounting and accessories
|
|
|
|
see the results for the following category : 
