|
|
|
Motorized Linear Slide Kits (identified by the prefix "K") include all accessories typically required for operation of the motorized linear slide. Check the Accessories tab to see what is included and what substitutions are available. Motorized linear slides are available without accessories for $30 US less than the kit price. To order individual motorized slides with no accessories, simply remove the 'K' prefix from the part number. We do not recommend this unless you are certain you have the necessary accessories.
|
|
|
|
|
|
Introducing Pacific Bearing Company’s new line of linear actuator products: The PL series, MT series, and MX series. With the reputation for providing the most innovative the solutions to the most difficult applications, PBC makes no exception with this new line of actuators. All systems are durable, self-lubricating, can handle a number of different working environments and come available with t-slots for easy mounting.
For a highly accurate and low cost solution, the PL series actuators have no substitute. The newly designed, ball-screw driven system eliminates the need for costly belt-driven gear boxes, comes magnetically sealed to work in contaminated environments, and the precision machined aluminum design allows for easy installation and long-lasting durability.
The magnetically sealed, versatile MT series actuators can be integrated into many different applications, horizontal or vertical, contaminated or clean. This belt-driven actuator provides a highly repeatability and high speed capacity with a longer stroke length than ball-screw driven actuators.
With its durable, robust design, the belt-driven MX series actuators can carry a high capacity at speeds up to 5 m/s! Also available in several different applications—both horizontal and vertical—the MX is superb for applications with a greater moment load with its large CAM rollers and is available in a longer stroke length. Making the MX series the actuators for heavy loads at high speeds.
Applications for these products include: automotive, food and beverage, packaging, and medical equipment.
|
|
The BiSlide Belt Drive Assembly consists of a motor/gearbox, mounted 90 degrees to a linear dovetail stage. The motor/gearbox couples to a stainless steel pulley which drives a steel reinforced timing belt.
The belt drive assembly is useful for long travel and high speeds. Speeds as high as 3 meters per second can be achieved using direct drive motors and high powered controllers. For high resolution, gear reduction motors are available. The belt drive’s high efficiency make it an ideal choice for moving light loads at high speed and for continuous duty applications.
The belt driven BiSlide Assembly is available in many length up to 220 inches (5.6 meters). Maximum payload is 260 lb./118 kg. Repeatability is 0.0002”/0.005 mm. Straight-line accuracy is 0.007”/10” length or 0.018 mm/25cm. The coefficient of sliding friction is 0.09. Cross-sectional size is 3.175” (80 mm) x 4” (100 mm)
|
|
LoPro® is an actuated linear motion system based on Bishop-Wisecarver’s signature DualVee Motion Technology™, a proven, highly reliable design with over 30 years of field-tested installations.
LoPro provides smooth and quiet motion over long lengths, and offers unsurpassed performance in harsh environments. No other single linear motion system offers the flexibility of belt, chain, lead screw or ball screw actuation, as well as an undriven option. Systems may be mounted or un-mounted. Support beams are available in aluminum or steel to meet application demands and to provide ease of installation.
LoPro linear systems are available in four sizes, and can be built to accommodate virtually any stroke length (stroke is limited only by the method of actuation). With load capacities up to 5,000 lbs. (22,000 N) and speeds in excess of 8 meters per second, LoPro linear systems are suitable for numerous applications.
|
|
|
|
|
|
A BIG LINEAR STEP FORWARD
... for small applications
Hepco's new Profile Driven Unit (PDU) plugs a significant gap in linear motion technology. It is a robust, high performance system designed specifically for applications requiring a cost effective solution to fit into a compact space envelope. Mechanically simple but highly innovative, PDU is very attractively priced and can satisfy the light-load, slow moving application to the more dynamically arduous high speed requirement.
PDU is the product of a marriage between proven belt technology, advanced engineering materials and Hepco's expertise in aluminum profile design. It comprises a slotted profile into which fits a drive belt and carriage. This arrangement effectively seals the unit. But perhaps the most significant element of the PDU system is Hepco's new Herculane® wheel technology.
These wheels run virtually friction-free on the inside surface of the profile providing stable support for the carriage plate. The unit offers extremely low friction and due to the wheel rolling motion will run without the need for any lubrication.
The carriage plate of the PDU is designed to accommodate the mounting of a second PDU unit. In this way a compact, high-performance X-Y system can be quickly and easily created.
|
|
|
Linear guide with wheels with transmission by timing belt, with predisposition for the mounting of a gearbox
|
|
|
Belt-driven DB actuators operate @ 5.1 meters per second (MPS). No lubrication or maintenance. They are ideal for applications where speed is critical such as pick-and-place mechanisms on high speed automation equipment. Travel up to 6 meters, repeatability of +/- 0.025 mm, linear accuracy of +/- 0.083 mm per meter.
|
|
The MLT100 Actuator is suitable for the movement of light loads with very high accelerations and speeds.
The self-supporting structure of the rail, together with the threaded holes on its back side, enables a very easy and quick assembly with low costs.
The 4 rollers trolley is designed to fix the load through four M6 holes.
Key features of MLT 100 Actuator are high performances in acceleration and speed, compact design, silentness and in addition MLT 100 is maintenance-free.
|
|
- Stock lengths up to 3 meters
- Custom lengths up to 6 meters
- All steel profile rail for high load capacity
- 50 mm wide steel reinforced belt for heavy loads
- Several motor options available
- Stainless steel available
- T-slots on three sides for mounting and accessories
|
|
Motorized precision slides PFL / PCL:
- PFL 180 / PFL 230 (integrated linear motor, bellows cover)
- PCL 220 / PCL 270 (integrated linear motor, sheet metal cover)
Motorized precision slides KBS / KCS:
Motorized precision slides with ball bearings
- KBS (with bellows cover)
- KCS (with sheet metal cover)
Motorized precision slides PFS:
Motorized precision slides with carriage bearings
- PFS with ball screw spindle drive
Motorized precision slides MR / MK:
- MR (with cross roller bearings)
- MK (with ball bearings)
Motorized precision slides MS:
- Motorized precision slides with slide bearing
|
|
A new range of rod less actuators is designed by SBC for fast and accurate movement in one or multiple axes. All systems are based on aluminium beams with one or two integrated linear guides and one or two saddle plates. The customer can choose between three different drive units.
•Belt driven units for fast movements and economic solutions.
•Ball screw driven units for accurate applications.
•Linear motor driven units for fast and high dynamic solutions.
A big assortment of dimensions and modifications makes it possible to select an actuator that perfectly matches the demands of your application.
The modular design and the broad range of accessories like mounting plates, gearboxes and motors will give a perfect solution to the customers.
|
|
Belt Driven Ball: Guided Units
Belt driven, ball guided positioning slides by Danaher Motion are designed for smooth travel in dynamic applications requiring high speed, high acceleration. These families present a long life performance in the midst of acceleration rates up to 40m/sec2.
Belt Units: Slide Guided
Thomson's belt driven, slide guided positioning units by Danaher Motion are perfectly suited for dynamic applications requiring high speed, high acceleration, low maintenance and smooth travel. These low cost guide systems optionally adapt to harsh chemical environments.
Belt Driven: Wheel Guided Units
Thomson's belt driven, wheel guided products from Danaher Motion are designed for dynamic applications demanding high speed, high acceleration but requiring smooth motion with medium to high loads.
|
|
Linear guidance are characterized by a great facility of assembly, a broad choice of the load capacities, raised speeds of work, adapted races.
The weak efforts of bearing and suitable dimensions allow one long life of life.
Drives belt notched, ball screw or adaptation engine.
|
|
DESIGN
·Compact, anodic aluminum construction shaped
·Guidance is ensured by a rail cuts 15
integrated.
On this rail a carriage assembled on two moves
shoes with balls with scraping joints, having
each one 4 circuits of recycled balls
·Coefficient of bearing weak and constant, necessary
for the rectilinear transfers from great races, 5800
maximum mm.
·Rates of jusqu’ travel; with 1.2 m/sec.
·Accelerations of more than 10 m/s ².
·Temperature d’ use between 0 and 70°c.
·A brake with power failure 24VCC can be gone up
in option
·Engines step by step or Brushless, can
to be gone up on this range of slides (see table
with the back).
·The transmission of the movement is ensured by a belt
notched 24 AT 5 d’ one developed of 80 mm/tr.
butted of end of the road against proximity detectors likely to be stripped
or other on request are external.
·These motorized modular slides are planned for
to be gone up in table XY.
|
|
SMAC linear slide actuators (Moving Coil Technology) such as LASW20 series are successfully used in high speed bowl feeder & escapement mechanism.
•50,000 cycle/hour
•Can run 24/7
•Units have been in the field for 18 months with no failures
•Life test unit currently at 250,000,000 cycles
SMAC linear slide actuators are also ideal for very demanding applications such as scanning, bottle ejecting, labelling, positioning, gauging and inspection to name but a few.
SMAC provides a comprehensive selection of linear slide actuators. They are fully programmable in force, velocity and position. Standard linear resolution on all SMAC actuators is 5micron with 1micron, 0.5micron and 0.1 micron options available on most models.
|
|
The "400XR" standard series linear positioners offer reliable performance and unmatched versatility. Convenient mounting features enable XY table combinations to be quickly and easily constructed. The XR family offers an unrivaled array of features and options which are easily matched to fit any application, from the very basic to the highly complex.
The HD Series Linear Positioners are designed for OEMs, Machine Builders, and End Users needing a robust positioning solution. The HD Series is easy to apply, easy to install, and easy to maintain.
Designed for OEM instrument manufacturers working to speed their time to market and reduce the overall installed cost for linear motion axes, Parker Hannifin's new PROmechTM Series linear actuators are a complete linear motion solution.
|
|
ECOLINE’s products have been designed to fit in applications where quality movement is needed at a low price. The patented design offers a well-protected, smooth slide that is easily and quickly mounted. ECOLINE combines the quality associated with all of ROLLON’s products with the affordability needed in application sectors like industrial protective panels, vehicle slides, and machine tool doors. ECOLINE is the answer to labor intensive, homemade solutions, cheap bent steel slides, or expensive, overdesigned round or profiled shafting.
|
|
Electric Ultran High Load Slide
Electric Ultran High Load Slides are the first standard electric models from Bimba Manufacturing.
Provides higher positioning accuracy, smoother operation, and facility for positioning control.
Perfect for addressing high moment loads, high side loads, and processes that require precision positioning.
Footprint similar to the Bimba Ultran High Load pneumatic line.
Available without motors, with DC motors, or with step motors.
Available in two frames, 09 and 17, fine or coarse.
Ball and lead screws are also available.
|
|
|
Pico series robots are single axis robots using a program-less controller PRC. While priced at a low level, each robot has various functions such as thrust control and zone signal output. It is also designed for great ease of use.
|
|
Adept Python is a family of high-quality linear modules for assembly and material handling applications. Python linear modules incorporate unique design features making them the most robust modules for gantry or cantilever configurations.
Our exclusive manufacturing process enables Adept to provide the exact linear module system needed for your application with a very competitive delivery time.
|
|
Guiding system SVAN - features:
- Dovetail Slides made of Aluminium, natural anodized
- 5 sizes: 20, 30, 50, 80, 120 mm with standard stroke between 5 and 100 mm
- Locking without horizontal and vertical side misalignment
- Compact sizes
- Adjustment with knurled micrometer knob (standard) or hex screwdriver
- High load ratings
- Guides without play
- High damping
- Scale with knurled micrometer knob
- Mounting kit (Clamps)
- Easy and quick to combine to 2 axis systems and/or 3 axis systems
Guiding system SVAN - examples of use:
- Adjustment of: Measuring cameras, Reflectors, Microscopes, Laser for precision machining (i.e. micro borehole), Machining units
- Adjustment of inkjet printers
- 3D measurements
- Focusing of burn strainers
- Adjustment of soldering heads, plasma heads, welding heads
|
|
Lifting module for engineering, work stations, flexible sit/stand work stations, height adjustable divan beds.
- laterally, the slide is guided by steel shafts, each with two hardened rollers
- housing made of aluminium profiles
- in short-term operation high transporting speeds can be achieved
|
|
MISUMI provides more than 1 Million mechanical components for the assembly automation. We delivery components europewide in averagely 6-8 days GUARANTEED delivery from the day of purchase, stock items available from 2 days delivery.
MISUMI 24/7 Web Ordering System (WOS) represents a full-fledged e-Commerce solution, which you can use, for the first time, independently from the catalogue in paper form, to configurate MISUMI products, submit quotations and place orders.
For more information about MISUMI, WOS or for ordering a catalogue please visit: www.misumi-europe.com
MISUMI - Precisely Meeting Your Demands
|
|
|
|
|
|
Linear spindle units
The linear spindle units feature high longitudinal load bearing capacity. Tapered thread spindles with self inhibition as well as ball-type linear drives of high precision are provided for the appropriate positioning tasks.
Timing belt - linear units
Dynamic tasks can nearly be solved without them. Toothed-belt linear units are fast and intended for inversion mode with short cycle times. The timing belts HD- and GT- quality reach highest precision when used for positioning jobs.
Toothed rack - linear units
In case of long strokes, spindles and timing belts cannot be utilized efficiently. This is the situation where the toothed rack accomplishes its purpose. Maximal 50 metres can be realised without lower accuracy.
Sliding and rolling guide
These linear units which are not driven are the ideal supplement for the driven units, e.g. if a supporting axle is required due to an eccentric load.
Heavy duty linear unit D-Line
Heavy loads have only be moved by linear axes made of steel components until now. The high dead weight, however, must often be moved too. This is unfavourable for the dynamics and the necessary motor size.
D-Line combines dynamics and the loading capacity with low dead weight and sounds the bell for a new generation in the filed of automation.
|
|
The linear modules MLT 410 provides a self-supporting frame to be easily integrated into the customer’s systems.
They are made of solid aluminium alloy profile with linea guide function.
A special treatment makes the rails’ surface hard like the hardened steel and resistant against wear, dust and damp.
The movement is realized through rollers with plastic compound shelle whic slide on hardened rails. This system can work in environmental heavy conditions without protection.
The movement is activated through timing belt AT10 width 32.
The standard accessories enable an easy and quick connection with motors and columns.
Versatility, high competitive performances, self-supporting structure and possibility to work in dusty rooms are the key features of our linear modules range.
|
|
The whole of the linear modules motorisables:
- Linear Modules on rollers with drive belt,
- Linear Modules on ball guide with drive belt,
- Linear Modules with drive by ball screw.
On request, following plane and schedule of conditions we carry out all types of specific systems (linear modules X/Y, special carriages GD.)
|
|
Linear ServoSlide
Key Features:
· Turn-key solution
· Modular design
· Direct Linear Drive
· High speed and acceleration
· Zero backlash
· Fast settling time
· Long stroke
The Direct Drive Linear Actuator
Linear Servo Slide system is an integrated linear actuator that eliminates wear, friction, backlash and compliances associated with mechanical transmissions, such as ball/lead screws, rack & pinion, belts/pulses and gearboxes.
|
|
|
|
|
|
GB-Series Linear Actuator
ORMEC offers two lines of linear ball screw actuators. Each actuator has a high performance servo motor and has rugged construction to satisfy your automation requirements. There is a single guide model and a dual guide model both are high accuracy and low backlash.
X-Y configurations are also available, if this is what you are looking for contact our factory for more information.
SGB 54 / 72 Series
* Single guide ball screw
* Compact size
* Servo Motor included
* Incremental Rotary Encoder 2000 rrp included
* Limit Switches built in and concealed
* Preload 2%
* Resolution on 10mm is 1.0 µm, computed
* SGB54 - width of 54 mm
* SGB72 - width of 72 mm
* Stroke from 100 mm to 500 mm
DGB 150/ 180 / 200 Series
* Dual guide ball screw
* Strokes from 200 mm to 1200 mm
* Compact size
* Servo Motor included
* Incremental Rotary Encoder 2500 rrp included
* Limit Switches built in and concealed
* Preload 2%
* Resolution on 10mm is 1.0 µm, computed
* SGB54 - width of 54 mm
* SGB72 - width of 72 mm
|
|
|
|
|
|
Compact Modules from Rexroth come complete with drive unit and controller. As plug and play solutions, they simplify machine designs and speed up the commissioning process. They cover the entire spectrum of mid-range to high-end assembly and handling applications. These linear motion axes can be supplied with screw drive, belt drive or direct linear motor drive and offer high dynamics, high load capacities, and high rigidity. Especially important for designers: Not only does Rexroth offer its Compact Modules in various sizes and in any desired stroke length, but also with optional extras.
Compact Modules with ball screw drive - CKK
- Maximum Length: up to 2.200 mm
- Maximum Speed: up to 1,3 m/s
- Load Capacities: up to 89.340 N
Compact Modules with toothed belt drive - CKR
- Maximum Length: up to 5.500 mm
- Maximum Speed: up to 5 m/s.
- Load Capacities: up to 56.530 N
Compact Modules with linear motor - CKL
- Maximum Length: up to 2.800 mm
- Maximum Speed: 3 m/s.
- Load Capacities: up to 13.646 N
|
|
|
|
