- Power Transmission - Mechanical components >
- Actuator and Positioning System >
- Motorized positioning stage
Motorized positioning stages
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Stroke : 50 mm - 1,200 mm
Speed: 60 mm/s - 220 mm/s
Repeatability: 0.02 mm
... Accuracy: 0.02mm Max Speed: 220mm/s Max Load: 40kg Ball Screw: G1610 Ball Screw Module, Belt Driven Linear Guide, Positioning Stage, Motion Controller for Cartesian Robot. CE, FCC, ...
FUYU Technology
Stroke : 100 mm - 2,000 mm
Speed: 650 mm/s
... 0.02mm Max Speed: 500mm/s Max Load: 100kg Ball Screw: G1610/G2020 Ball Screw Module, Belt Driven Linear Guide, Positioning Stage, Motion Controller for Cartesian Robot. CE, FCC, ...
FUYU Technology
Stroke : 50 mm - 3,500 mm
Speed: 4,000 mm/s
Repeatability: 0.05 mm
... the customer's requirements, our technical team designed the following structure. Belt Driven Actuator Multi-axis Positioning Stage Linear Motion Gantry Robot
FUYU Technology
Stroke : 1 mm - 40 mm
Speed: 1 mm/s - 200 mm/s
Repeatability: 0.3 µm - 5 µm
LA92 High Speed UHV Linear Axis Application: High resolution and fast scanning applications Benefit: Fast positioning in UHV, also vertically Features: Outstanding resolution, very slim, with internal motor • ...
Steinmeyer Holding GmbH
Stroke : 1 mm - 130 mm
Speed: 1 mm/s - 10 mm/s
Repeatability: 0.4 µm - 5 µm
LA170 Precise high load XYZ linear axis Application: Transport Stage, scanning stage for high loads Benefit: High life time despite dry lube Features: lead screw with dry lube or ball screw with ...
Steinmeyer Holding GmbH
Stroke : 1 mm - 100 mm
Speed: 1 mm/s - 10 mm/s
Repeatability: 0.4 µm - 5 µm
LT300 Precise high load linear stage Application: Transport Stage, scanning stage for high loads Benefit: High life time despite dry lube Features: lead screw with dry lube or ...
Steinmeyer Holding GmbH
Stroke : 0 mm - 400 mm
Speed: 1 m/s
Load: 0.5 kg - 60 kg
Table for manual using or outside motorization Guided on ball bushings Options : Hydraulic shock absorbers Elastic absorbers Position clamping (for manual using) Assembly in XY table Guide tables without transmission These tables ...
... rotation through the base. The rotating platform is lockable. Eleven M2-threaded holes and two positioning holes provided on the stage platform, can match the positioning pins of the ...
Daheng New Epoch Technology,Inc(CDHC)
Motorized Rotational Stages GCD-01 provide 360°of rotation with highaccuracy and stability. This is an excellent general purpose rotator. Coarseangular position is indicated on a 360°engraved scale on ...
Daheng New Epoch Technology,Inc(CDHC)
Stroke : 150, 50, 200 mm
Speed: 40 mm/s
The Motorized Translation Stage GCD-10 Series uses a linear motor forload carrying and linear guide, which features with low cost and dustresistance,but low load capacity. This type of translation stages ...
Daheng New Epoch Technology,Inc(CDHC)
... Motion control in position by Ethernet protocol • Configurable motion speed and acceleration • Accurate and vibration-free positioning en-ables optimal reading • Optional vibration of micro plates in reading position ...
... compact goniometer stage CGO-77.5 can be directly mounted on top of CLS-52 linear stages or act as a base for an Eulerian cradle when combined with a CGO-60.5 stage. All piezoelectric ...
A cryogenic rotation stage which dimensions perfectly match multi-axis SLC-24 positioning systems. The SR-2812-CR is specifically designed for use at cryogenic temperatures. Its external dimensions ...
Stroke : 12.5 mm
VR3 High Precision Positioning Stage Family: VR3 Model: VR3-.5-T-PL Price: $ 1,101.00
DELTRON
This is an example of a Lasik eye surgery application where the end user required a precise XY positioning system capable of making high speed micro positioning adjustments. Precise repeatability and ...
DELTRON
A medical testing equipment manufacturer came to Del-Tron Linear Engineering for a custom motorized XY linear stage that could provide the overall accuracy, speed and reliability necessary for DNA testing. ...
DELTRON
Stroke : 10 mm
Speed: 1.5 mm/s
10mm travel with 22 x 15 mm footprint compact design smallest product in our portfolio Ultra small miniature translation stages with piezo electic inertial drive.
mechOnics ag
Stroke : 30 mm
Speed: 1.2 mm/s
... footprint for various application fields our all-rounder multi axes combinations without adapter plates Miniature translation stage with piezo electric inertial drive.
mechOnics ag
Stroke : 8 mm
Speed: 1.2 mm/s
... operation (resolution up to 50nm) multi axes combinations without adapter plates Miniature translation stage with piezo electric inertial drive with measuring system.
mechOnics ag
Stroke : 0 µm - 12,000 µm
Speed: 0 mm/s - 1,400 mm/s
Zaber's X-DMQ-AE Series devices are computer-controlled, direct-drive voice coil driven, linear stages with high acceleration and precision capabilities in a compact size. They are stand-alone units requiring only a standard ...
Zaber Technologies - Vancouver, BC
Stroke : 250, 300, 150, 200, 100 mm
Zaber's LC40B-KM Series of motorized linear guides are belt-driven recirculating ball bearing guides designed to interface seamlessly with most 40 mm T-slot extrusion framing systems and accessories. Hardened bearing ...
Zaber Technologies - Vancouver, BC
... closed-loop, belt-driven motorized linear stage with a built-in motor encoder and controller. With travel lengths up to 3 m, 10 µm repeatability, and a maximum speed of 2.0 m/s, X-BLQ-E stages ...
Zaber Technologies - Vancouver, BC
Stroke : 28 mm - 5,694 mm
Speed: 9 m/s
Repeatability: 5 µm
... features a cable outlet for added versatility in its applications. Information of this linear motor stage Capacities of this linear motor stage: Measuring system repeatability: ± 0,5 μm Maximum ...
SINADRIVES
Stroke : 52 mm - 5,716 mm
Speed: 9 m/s
Repeatability: 5 µm
MLC5 linear motor stage: electromechanical actuator for automation MLC5 is a covered linear motor stage, certified for ISO3 clean room environments. It stands as the optimal choice for applications ...
SINADRIVES
Stroke : 8 mm - 3,272 mm
Speed: 9 m/s
Repeatability: 10 µm
... under demanding cleanliness and particle control conditions. Information of this linear motor stage for Cleanroom Capacities of this linear motor stage: Measuring system repeatability: ± 1 μm Maximum ...
SINADRIVES
Welding motorized stages are constructed in a maximum dimension of 80 x 130 mm. These are most commonly known as XY tables and are fabricated in aluminum materials. They are constructed in a swan neck ...
Stroke : 100 mm
Speed: 3 m/s
... testing, alignment and component assembly in any application on the factory floor or laboratory environments. The precision ball screw or micrometer grade lead screw provide excellent accuracy and repeatability with ...
IntelLiDrives, Inc.
Stroke : 100 mm
Speed: 40, 100 mm/s
... These units achieve travel speeds of up to 80 mm/sec and a positioning repeatability of 5 microns when driven with rotary stepper or brushless servo motors. Stroke, mm: 100 Mechanism: motorized ball ...
IntelLiDrives, Inc.
Stroke : 200 mm
Speed: 40, 100 mm/s
... These units achieve travel speeds of up to 80 mm/sec and a positioning repeatability of 5 microns when driven with rotary stepper or brushless servo motors. Stroke, mm: 200 Mechanism: motorized ball ...
IntelLiDrives, Inc.
Stroke : 3.81 cm - 26.67 cm
Repeatability: 4 µm
Load: 1.36 kg
The smallest of the motorized UniSlide Linear Stages with a body width of 1.5 inches, slider length of 1.5 inches and a carrying capacity of 3 lbs. horizontal load. The MA15 can travel up to 10.5" with ...
VELMEX, Inc.
Stroke : 1.27 cm - 52.07 cm
Repeatability: 4 µm
Load: 6.8 kg
The MA25 Series UniSlide stage has a body width of 2.5 inches, slider length of 2.5 inches carrying a 15 lbs. horizontal load. The MA25 can travel up to 20.5" with the 2.5" slider/carriage. The MA25 Series UniSlide is ...
VELMEX, Inc.
Stroke : 2.54 cm - 78.74 cm
Repeatability: 4 µm
Load: 45.5 kg
... thrust bearings and snap ring retainer. The lead screw drive nut is a tension adjustable nut made of Delrin providing low friction, and minimal backlash. The MA40 Series is part of 5 motorized UniSlide ...
VELMEX, Inc.
Stroke : 12 mm - 320 mm
This platform is a hybrid planar mechanical/air bearing platform dedicated to step and scan applications. It is a 6 axes platform moving in X, Y, Z and Theta directions. Dynamic flatness over the full travel as well as bidirectional repeatability ...
Stroke : 25 mm
Speed: 2.9 m/s
The 3DMS is a motorized translation stage with sub-micron precision that is capable of converting a conventional Sutter MP-285 manipulator into the 3-dimensional motorized stage. ...
SUTTER INSTRUMENT
Stroke : 25 mm
... 1078/MT-2078/MT-2278 systems consist of a X-Y translator and a large fixed stage. The MT-78-FS is designed for users who prefer a large platform stage for their experiments. The stage ...
SUTTER INSTRUMENT
Stroke : 104 mm - 333 mm
The MT-70 and MT-71 series of stands are sturdy, stable, and extremely versatile for mounting components for a variety of research applications. They were designed for placing our heavy Huxley-style micromanipulators adjacent to any microscope. ...
SUTTER INSTRUMENT
Stroke : 80 mm - 120 mm
Speed: 40 mm/s - 100 mm/s
Repeatability: 0.2 µm - 0.7 µm
... applications. The H101F is the highest speed non-encoded option flat top upright stage range, featuring Prior's patented Intelligent Scanning Technology (IST) to optimize stage accuracy, linearity and ...
Prior Scientific
Stroke : 120, 72 mm
Speed: 0.3 m/s
... surface of the stage is completely free of obstruction. This provides a highly ergonomic platform with exceptionally easy access to the sample area. The HLD117 incorporates constant contact bearings giving the lowest ...
Prior Scientific
Stroke : 108 mm
Speed: 0.02 m/s
The HT1111LC ProScan™ Solid Frame Stage is designed for upright microscopes and hardness testers. The HT1111LC has a travel range of 108mm x 108mm, repeatability of 0.7 microns and a weight capacity of up to 100kg and ...
Prior Scientific
Stroke : 500, 350 mm
Speed: 0.5 m/s
The XY positioning table, manufactured by Jenaer Antriebstechnik, is a 2-axes precision table equipped with a sheet metal sealing. It has a payload capacity of 50 kg, velocity of 1 m/s, positioning resolution ...
Stroke : 490, 440 mm
Speed: 0.5 m/s
... ready for mechanical and electrical connections. It is designed with a screw lead of 20 mm, travel range of 500 x 500 mm, positioning resolution from 0.5 up to 1.0 µm, and repeatability of < 10 µm without linear measuring ...
TU Series is a compact and slim type positioning table, consisting of a U-shaped track rail and a slide table. The slide table assembled inside the U-shaped track rail is an integral part of a linear motion rolling guide ...
IKO Nippon Thompson Europe
IKO Precision Positioning Table TE is a lightweight and compact positioning table using high-strength aluminum alloy for its main components, with a slide table assembled inside a U-shaped ...
IKO Nippon Thompson Europe
IKO Precision Positioning Table L is a lightweight, long stroke positioning table configured with the slide table and bed made from high-strength aluminum alloy. High accuracy and carrying ...
IKO Nippon Thompson Europe
Stroke : 50 mm - 2,000 mm
These modular positioning tables provide the design flexibility and options to suit a wide variety of demanding, high-precision positioning applications. An innovative magnetic cover ...
Stroke : 30, 50, 100 mm
Speed: 5, 50 mm/s
... environmental conditions The MT105 is a universally applicable micro stage that impresses above all with its high dynamics and speed. It is designed to achieve excellent running and positioning accuracies ...
Steinmeyer Mechatronik GmbH
Speed: 150 mm/s
XY scan stage for automated sample scanning | X-ray, ion radiation as well as non-tiltable beam sources e.g. synchrotron - Laboratory / Analytics Scan stage for high-precision analysis of laboratory ...
Steinmeyer Mechatronik GmbH
Stroke : 50 mm - 720 mm
Speed: 5 mm/s - 1,400 mm/s
This inspection system (shown here without cover) is specially designed for automated quality assurance. The positioning system allows positioning along two linear axes. A high-resolution camera or sensor ...
Steinmeyer Mechatronik GmbH
Stroke : 20, 30, 50 mm
Low-profile Precision Motorized X axis Positioning Stage Single Axis-X Axis Guide-Crossed-roller Guide, In structure, V-groove and crossed roller acquire movement in high accuracy and capacity by linear ...
Stroke : 95 mm
... and bottom plates parallel to 1 mm Load capacity 8 kg (depending on motor & controller) Supply voltage 36V Motorized Vertical Translation Stage 940-0200 boasts our unique design. Being very compact, ...
Stroke : 50 mm - 200 mm
... Non vacuum version Vacuum Compatible Motorized Stages are equipped with vacuum compatible stepper motor. Stages stack in X-Y configurations directly using M6 screws. Angle Bracket 810-0160V ...
Stroke : 25 mm
Thorlabs' wide selection of translation stages includes these 25 mm (1") travel translation stages. One-, two-, or three-axis stages are available. Both manual and automated actuator options exist.
Thorlabs
Stroke : 50 mm
Thorlabs' wide selection of translation stages includes these 50 mm (2") travel translation stages. Within this category of stages, options include one-, two-, or three-axis stages ...
Thorlabs
Stroke : 150 mm
... series of stages are compact, making it possible to set up experiments in locations where space is minimal. Two stages can be directly stacked into an XY configuration or, with the use of the NRT150P1 ...
Thorlabs
Speed: 420, 280 mm/s
... type, are introduced. Rotary type (RF) Universality, energy-saving and low impact achieved with multi-position positioning unique to motorized devices Compact rotary axis type. High-precision bearing ...
Stroke : 0 mm - 2,860 mm
Speed: 1.3 m/s - 1.5 m/s
• Can be configured flexibly as a complete drive system for almost any application • Available in four sizes finely graduated length increments • High rigidity, positioning accuracy and repeatability ...
Bosch Rexroth - Linear Motion Technology
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining