Multi-stage pumps

147 companies | 714 products

The pump is designed for applications that require pumping of clean (dust-free) and non corrrosive gases. Standard pumps are equipped with a gas ballast device to improve pumping of light...

G version pump is compatible with trace amounts of corrosive gases. Three jets located in the purge line help withstand trace amounts of corrosive chemicals, protect the low and high pressure ball bearings....

CV versions extend the pure water vapor capacity up to 1000 g/h (at 100 mbar and 30 °C ambient temperature). A high gas ballast flow warms up the pump and dilutes condensable gases (> 2 N.m3/h or 33 slm at 1 bar...

{{productDetail[14656]}}

The 728619E two-stage hydraulic pump is ideal for use with the SKF Supergrip bolts. It is also suitable for mounting and dismounting of components or bearings that require...

{{productDetail[18813]}}

MTR, SPK, MTH, MTA pumps are multistage vertical centrifugal pumps. They pump cooling lubricants for machine tools, condensate transfer and other similar applications.

The pumps'...

This CMV pump is a vertical and multi-stage model with compactness, as it consists of an interchangeable modules series. It’s of the close-coupled variety and features a mechanical shaft seal. All of...

The basic CR pump range can be used in any industrial processes. Available in materials like cast iron, two grades of stainless steel and all-titanium, it has eleven...

The single and multistage end-suction stainless steel radiating pumps of the premium Contra reach are intended for utilization in businesses where cleanliness and adaptability are top necessities. They are produced out of top notch materials to meet...

The Grundfos BMET booster module consists of a BME and BMT pump, both connected in series. Both pumps feature a Grundfos multi-stage submergible pumping unit built into a stainless steel frame, with the BME pump powered by a V belt...

{{productDetail[5420]}}

The Warman® AHP/AHPP Fully lined high pressure pump is designed for applications with multiple stages....

The Warman® HH H HRM specialized slurry pumps series are encased in strong ductile iron lined housings and can deal with a multi-stage operations with maximum...

Warman® HTP Pumps are utilized for extreme multi-stage applications, and deliver a variety of quick...

The Hazleton® MS, MSB series of specialty slurry pumps from Weir Minerals have...

{{productDetail[23306]}}

The Container Pump B50 is an ideal equipment for transporting corrosive, neutral and aggressive substances from IBC...

These pumps can be used to empty basins and containers of their contents. Also applicable in chemical processes to recirculate...

Lutz B80 KGK G3 immersion centrifugal pump is strong and offers high performance. It features a plain bearing, an IEC standard motor and has support stand mounted on roller bearings. The pump can be provided in both single- or two-stage...

{{productDetail[7267]}}

Weir SPM's Destiny™ TWS 2500 features a 2500 horsepower rating
with 273.000 lb of rod load and a 10" stroke. It is...

The AXDD is a horizontal line pump with double suction in its first stage impeller and an axially split casing. The second stage offers an ample balancing line for maintaining suction and stuffing box pressure, all within acceptable limits...

This product features heavy duty barrel multistage pumps that symmetrically split and has single/double entry 1st stage impellers. For higher product reliability, optimization through hydraulic, thermal, structural...

These are heavy duty multistage pumps that are flexible and ideal for very heavy operations. The pumps have a number of unique features that enable them to function efficiently at all times without fail. These features are: single or...

The VBN, VBN-DS line heavy duty process pumps represent the vertical multistage diffuser type. Available in two configurations, one features a double-casing...

{{productDetail[23312]}}

The TP30KE110N and TP30KE230N are two-stage electric pumps built in a compact, sturdy aluminum frame for improved durability, and convenient handling....

{{productDetail[37632]}}

The PA 04 H 2 is the most compact, single action, 2 stage hand pump in the hand pump range. The pump is ergonomically designed, has...

The PA 09 H 2 is a compact, single action, 2 stage hand pump in the hand pump range. The pump is ergonomically designed, has a robust,...

The PA 18 H 2 is the all-round, 2 stage hand pump in the hand pump range. The pump is ergonomically designed, has a robust, compact construction, is service-...

The PA 38 H 2 is a medium size, 2 stage hand pump in the hand pump range. The pump is ergonomically designed, has a robust, compact construction, is service-...

De PA 18 F 2 is the all-round 2-stage foot pump. The pump is ergonomically designed, has a robust, compact construction, is service- and maintenance-friendly...

{{productDetail[16432]}}

Vertical multistage centrifugal pump from the TVM Series meant to handle freshwater. Being an in-line type, this pump takes up hardly...

TVMS-series is a vertical multistage centrifugal pump,is designed for handling freshwater....

The THM series is a flat multi-stage centrifugal pump developed by Tsurumi. It is built with 304 stainless...

{{productDetail[30418]}}

The HEP is equipped with a remote control and a pressure gauge. Delivering an output...

{{productDetail[9317]}}

The Springson - Springson PAC and hydromini efficiently protects the pump. With its multi-stage design, good hydrualic performance...

The SELF-PRIMING MULTI-STAGE SURFACE PUMP is designed for housing and agriculture applications. It is used to pump clearing liquids...

Jetson hydromini multi-stage surface pump has flow rates that can reach up to 5 m3/h and maximum pressure that revs up to 6 bar. It can hold up...

The horizontal multi-stage pumps of the MUH Series feature a compact, monobloc design and offer highly efficient, silent operation. They are intended for use with clear non-loaded fluids in the housing, agricultural and industrial sectors...

The vertical multi-stage pumps of the MUV series can be easily incorporated into all modular systems and are intended for the pumping of clear liquids, free of particulate matter from...

{{productDetail[7919]}}

The Globe produces a portable hand pump system, which is made of 316 grade stainless steel. The hand pump is produced for testing out water and oil. The unit can...

{{productDetail[23399]}}

This is diaphragm pump (chemistry design) which is an ideal solution for oil free pumping that needs to be continuous. It is usually used for corrosive gases and vapors.

It has a 2 stage architecture which has the advantage of high pumping speed and low vacuum. The parts...

MZ 2C NT is a chemistry diaphragm pump manufactured by Vacuubrand. It is suitable for continuous, oil free pumping of corrosive gases, and vapors. The pump's parts in contact with the medium are made...

The MZ 2C NT Vario Model of Chemical-Resistant Diaphragm Pump, manufactured by Vacuubrand GMBH + CO KG, is specifically designed as two-stage chemistry diaphragm...

The MD 1C is a diaphragm pump manufactured by Vacuubrad. It is suitable for use in continuous, oil-free pumping of corrosive gases and vapors.

The unit combines high pumping speed with...

{{productDetail[15301]}}

ZL1 series pumps are single- and two-stage pupms. Their performance is as per EN 733/ DIN 24255 with an additional size of DN 25 with a compact design. The arrangement for suction and discharge is in line for direct installation on...

These are the CEH-X/CEH pumps which are highly advanced. They have a segmental type construction with open vane wheel impellers. The designing of this pump is a centrifugal combined system like design. This combination pump can be is suited with a centrifugal stage in serial...

The AEH pumps are specifically designed to seamlessly tackle the challenges brought about by the industry under challenging circumstances. The AEH is applicable for the demanding industries where...

The AKH-X and AKH from the SIHI Group is used for handling clean or turbid liquids without any abrasive particles. It is made of open vane wheel impellers.

The pump can handle...

The AOH have a segmental kind development with open vane wheel impellers. The program involves 4 sizes with up to 4 stages for the sizes 1100/1200 and up to 3 stages for the sizes 3100/3600. The...

{{productDetail[17731]}}

Vertical multistage centrifugal pumps.
Shaft, impellers, spacers - stainless steel.
Mechanical seal FKM (fluoroelastomer).
Main...

{{productDetail[19907]}}

With the unparalleled combination of high flexibility and ergonomic designs, the Andritz high-pressure pumps, HP and MP series, enable an ideal energy...

{{productDetail[26150]}}

TMB and TMBZ series high pressure centrifugal electric pump contains double support and lateral suction fitting....

The TM series comprises centrifugal and high-pressure electric pumps used for axial suction. These pumps...

The CMW 201 Series features a multi-stage vertical electric pump engineered for...

The MK65 Series of multi-stage vertical electric pumps is developed for various...

The MK65/R model manufactured by Saer, is a multistage vertical electric pump, suitable for lifting...

{{productDetail[19914]}}


Feature:

- High strength reinforced alloy aluminum reservoir is lightweight and corrosion resistant
- Internal pressure relief valve for overload protection
- Suggested...

- High strength reinforced alloy aluminum reservoir is lightweight and corrosion resistant
- Internal pressure relief valve for overload protection
- Suggested air pressure range: 8-14 BAR
- Designed to be used with...


Feature:

- High strength reinforced alloy aluminum reservoir is lightweight and corrosion resistant
- Internal pressure relief valve for overload protection
- Suggested air pressure range: 8-14 BAR
- Designed...

{{productDetail[115719]}}

The Werner Wetner GmbH has an operation pressure maximum of 700 bar with a radial...

{{productDetail[58778]}}

Close coupled multi-stage submersible pumps in chrome-nickel stainless steel.
Hydraulic part under the motor and motor cooled by the pumped water for safe operation also with the pump only partially immersed.
Double shaft seal with interposed oil chamber.
The suction strainer prevents the entrance of solids with diameter bigger than: 2mm.
...

Single phase with built-in capacitor and thermal protector no control box required
Three phase with built-in thermal protector
Close coupled multi-stage submersible pumps in chrome-nickel stainless steel.
Hydraulic part under the motor and motor cooled by the pumped water for safe operation also with the pump only partially immersed.
Double shaft seal with...

Single phase with built-in capacitor and thermal protector no control box required
Three phase with built-in thermal protector
Close coupled multi-stage submersible pumps in chrome-nickel stainless steel.
Hydraulic part under the motor and motor cooled by the pumped water for safe operation also with the pump only partially immersed.
Double shaft seal with...

{{productDetail[144798]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation