|
|
The Unicom 6000 machining centre is ideally suited for vertical turning and multi-sided machining of complex components. This highly flexible and powerful machining centre for complete machining results from the continuous development of vertical machining centres over a period of more than 25 years.
The concept of Unicom 6000 is based on a moving table with integrated carousel turning station and an interface that can receive pallets of up to 2.500 mm in diameter. The table movement is designated as Y-axis and it runs underneath a traverse with cross slide and spindle carrier. The movements of cross slide and spindle carrier are designated as X-and Z-axis respectively.
Unicom 6000:
4-Axes complete machining centre with HSK100-A interface, carousel turning station and pallet changer. The machine can be equipped with a right angular head or a universal head, in combination with C-axis mode in the carousel turning station.
Unicom 6000-HV:
5-Axes complete machining centre with carousel turning station, pallet changer and HSK 63-A interface in the integrated Unisign Nutator NC machining head as 5th axis, in combination with C-axis mode in the carousel turning station. This configuration is capable of 5-axes machining of complex components.
|
|
The FLP Series movable cross rail and plano-milling machines are designed for machining operations of workpieces from steel casting, steel forgings, welded construction; rough and heavy duty, finishing and superfinishing,
of various size and shapes, through milling, boring, drilling and tapping. |
|
The T-HBM CNC machine has been designed to provide versatility with features such as a built-in rotary table which permits economical machining of multi-sided work pieces in one setup.
The operations range may be extended by using different special accessories.
The work pieces can be machined by the same clamping on four or five surfaces by the following rough or finish operations:
boring, milling, threading, drilling, counter boring |
|
The TTHBM CNC Series table type horizontal boring and milling machines are designed to process middle size prismatic work pieces made of cast iron, steel, aluminum or other materials.
The work pieces can be machined by the same clamping on four or five surfaces by the following rough or finish operations: boring, milling, threading, drilling, counter boring. |
|
| The AFP series are large floor type horizontal boring and milling machine of various spindle diameters. These machines are designed for milling, boring, drilling and tapping of large workpieces made of cast iron, steel or non-ferrous metals. |
|
DATRON M35
Versatility
The innovative construction of the newly developed CNC machining system M35 and efficient accessories are the basis for the specially high versatility in precise milling and drilling applications.
The CNC machine offers a working area of 1020 x 700 mm and can be configured with a high-frequency spindle with a rotational speed of up to 60,000 rpm.
The machining table has been cast with solid concrete polymer. The vertical clamping surface at the front for machining particularly high parts is a special feature of the M35 machine. A continuous table surface is option-
ally available. The machining system can be upgraded for using the DATRON module clamping techniques.
|
|
The Vertical Line series machines with automated job feeding feature and special high speed electro spindles are quite suitable for mass production jobs. With modular tooling concept these machines are capable of performing variety of operations in one setup like, Turning, Milling, Drilling & Tapping and even Grinding. Vertical Line easily replaces horizontal single spindle machines with automation of gantry loaders or robots because of its simplicity and compactness.
The concept of moving the inverted vertical spindle head in all axes and keeping the front space of base open for customization of tooling requirement makes this machine series unique. Vertical Line series machines are having a single piece rigid construction base which supports all moving and stationery components
|
|
- QAD-WAY, CENTER-MOUNTED HEADSTOCK CAPTURE SYSTEM UTILIZING BOX WAYS(FRONT) AND LINEAR GUIDEWAYS(REAR) FOR SUPERIOR RIGIDITY.
- WIDE SADDLE BOX WAYS COMBINED WITH ROLLER PACKS PROVIDE SUPERIOR VIBRATION DAMPING, PRECISION AND REPEATABILITY.
- BOX WAYS ON TABLE, SADDLE AND COLUMN UTILIZE ANTI-FRICTION MATERIAL MATCHED TO HARDENED CAST IRON SURFACES.
- ANTI-BACKLASH DOUBLE-PINION GEAR DRIVE ON ROTARY TABLES.
FULL CAST IRON STRUCTURE(TABLE, SADDLE, COLUMN).
- T-BASE INTEGRATED TABLE AND SADDLE CONFIGURATION.
TRAVELS : X=2000-6000 Y=1200-3500 Z=1000-2500 mm
Boring bar diam. 125-130-150-180 mm W=600-800-1000 mm
ROTARY TABLE : 6-12-20-30 TONS 1000x1000-2.500x3.000 mm
APC AUTOMATIC PALLET CHANGER : 2-4 PALLETS
ATC AUTOMATIC TOOL CHANGER : 20-120 TOOLS
AUTOMATIC HEADS :
UNIVERSAL 2,5ºx2,5º/1ºx1º/0,1ºx0,1º 37 kW
CNC FACING HEAD UP TO 1500 mm DIAMETER
AAC PICK-UP MAGAZINE : AUTOMATIC ATTACHMENT CHANGER |
|
| is a universal machine tool designed for precise milling, coordinate boring, the boring and cutting of box and plate screws and complicated workpieces of cast iron, cast steel and steel with a weight of up to 12,000 kg. |
|
MX-RAM FLOOR TYPE BORING-MILLING MACHINE (LINEAR GUIDES)
- The MX 7 RAM utilizes the same design concept as the MX 7 milling center with the added benefit of a live boring spindle contained within the ram.
- The milling ram is captured on all sides within the headstock. Anti-friction material sliding on cast iron way surfaces and linear roller packs riding on hardened way surfaces are combined to give the ram superior vibration damping, rigidity and accuracy.
- Longitudinal ram and boring spindle growth is controlled through the use of a chiller system and temperature monitoring probes located throughout the ram/spindle assembly.
- Four linear guideways, two in the front and two at the rear of the column, capture the headstock within the column and provide the machine with enhanced rigidity and stability.
- The wide cast iron bed of the MX7 RAM provides an ultra-stable platform. Fitted with linear guideways, the bed structure allows accurate machining of large parts at rapid feed rates.
TRAVELS : X=4.000-30.000 mm Y=2.000-4.500mm Z=1.000-1.200 mm
BORING BAR : DIAMETER 130-150-160 mm W=700-800 mm 37-51 KW
UNIVERSAL HEAD 2,5ºx2,5º/1ºx1º/0,1ºx0,1º - 37 KW - 5.000/24.000 RPM
TWIST HEAD 2 CONTINUOUS AXES 0,001º: A +/-105º C +/- 185º 5.000/24.000 RPM ( MECHANICAL & ELECTROSPINDLE HEADS )
ATC TOOL CHANGER : 20-120 TOOLS
AAC PICK UP STATION : 2-6 ATTACHMENTS
ROTARY TABLES : 6-120 TONS 1000x1000 mm UP TO 4.000x5.000 mm |
|
| is the biggest representative of the new program of boring machines produced by TOS VARNSDORF a.s. The machine provides high cutting performance within the entire operating area and high comfort of user functions. The combination of the progressive and traditional features of its construction and cutting-edge technology provides the user with excellent conditions for the efficient machining of large size and heavy weight workpieces while using the most demanding techological processes. |
|
A boring mill controlled in five axes in table-type design featuring a working envelope of 2.5 x 2.5 x 1.5 m for all-around machining of parts having a maximum weight of 10 tons.
High numbers of revolutions and feed rates in conjunction with a high performance in this size of construction ensure distinct reduction of flow times and cost. Up-to-date driving equipment and backlash-free guides as well as traversing elements are the warrant for highest precision and low-maintenance operation.
Automatic tool changers with various magazines sustain universal application of machine as a machining center.
Comprehensive accessories such as various milling heads, NC facing heads and support bearings are to enhance the universal character of machine. |
|
F SERIES
•Longitudinal traverse, "X" axis: 3,000 to 30,000 mm
•Vertical traverse, "Y" axis: 1,400 to 5,300 mm
•Cross traverse, "Z" axis: 1,000 to 1,600 mm
•Rapid traverse X, Y, Z axes: 25,000 mm/min
•Feed range: 5-10,000 mm/min
•Digital CNC Heidenhain (Selca, Fagor, Siemens, Fidia)
•Automatic indexing heads and Orthogonal heads 30 (37)kW, 3,000 (4,000, 5,000, 6,000) rpm, with coolant through the spindle possibility
•Automatic head changing system.
•ATC 30 to 120 tools.
•Floor plates, CNC rotary tables and rotary tables with linear W axis
•CE Full splash guards |
|
The universal machining centre MAKAmove of gantry-type design with
3 and 4-axis technology allows precision machining of workpieces
with a max. length of 6,000 mm of wood, plastics and composite material.
This series of best suited for manufacturers of interior fittings as well as
for suppliers for furniture industry, manufacturers of kitchen panels,
stairs, doors, windows and plastic panels for technical applications.
Manufacturers profit from the MAKA state-of-the-art technology,
the Siemens controller technology and a top price-performance ratio.
Field-proven mechanical and electroniccomponents together with high acceleration speeds and machine precision stand for reliability and durability. |
|
| The C series is based on the slant- bed machines of sizes N 30, N 40 and N 50. The basic assemblies and components such as the bed, lathe spindle and driving units as well as the tailstock or counter spindle are identical with those from the lathe series. Single- and multi-slide concepts are available as parts of a modular design system. |
|
The "W" Series Vertical Lathe, primarily dedicated to the machining of light alloy aluminum wheels for the automobile industry, has been IMT Intermato's best selling machine for the past 20 years.
The most popular model, W20-T4, a four-axes machine with pallet loading system, has been produced hundreds of times over and it represents IMT's leading force, bringing along models 22, 24 and 32-all of which now form a large range of vertical lathes capable of meeting almost all existing market demands. The continuous implementation of the already sophisticated projection system has allowed IMT to fine tune and improve the
already high quality of its machines-consequently guaranteeing benefits that reflect in their safety, ergonomics and operation. |
|
| ... products without technical information |
| |
|
|
