|
|
# B+K Precision offers a wide variety of current clamps for safe non-invasive current measurement. Measure up to 2000A with these reliable, rugged instruments. All of B K Precision clamps are much more than a current clamp offering the ability to measure, voltage resistance, capacitance and even frequency. Additionally, special features allow for the recording of minimum and maximum values, peak values, test diodes and for continuity. Any one of these products can be a total measurement solution. Measures up to 1000A
# Measures up to 1000VDC & 750Vac
# Jaw openings 2.24"
# Low battery indication
|
|
The Model 325 AC/DC True RMS Power Clamp Meter provides safe, non-invasive measurements of up to 400KW, 400 Amps AC, and measures up to 600 Volts AC/DC utilizing the pair of standard test leads. The lightweight, portable, battery powered clamp meter measures the most common ACV, DCV, ACA & DCA needed to troubleshoot residential and small commercial electrical systems. Back light 3 ¾ digit LCD display
# Auto range
# Auto power off
# Data Hold
# High speed bargraph
# Test ranges: ACV, ACA, DCV, DCA, Ohms, WATT, Frequency & Continuity
# Jaw opening 1.37%u201D (35mm)
|
|
F129T
Dual Display True-RMS ClampDMM™ with Detachable Current Head
The MAXIMA Series ClampDMM™ is a hand-held, battery powered digital multimeter with clamp-on current measuring capability, backlight and worklight.
Features:
- 3-3/4 digit, 4000 count LCD display
- Auto-ranging measurement with manual ranging (Amps or adapters only) capability
- MIN/MAX (Peak Hold) (all ranges except Frequency)
- Frequency/Duty Cycle/Data Hold
- Auto power off with manual override
- Detachable current probe makes the meter
compatible with all kinds of DC mV output
adapters
- Built-in test leads storage & magnetic mount
- Backlit display & Work light
- Temperature
- Non-Contact Voltage
- Dual display
- TRMS Measurement
|
|
3999 Count Clamp Meter ( DCM-033)
DCM-033 Features:
DC Voltage 400mV~ 600V (0.8%+1)
AC Voltage 4V ~ 600V (1%+5)
DC Current 40A/400A (2%+3)
AC Current 40A/400A (2.5%+5)
Resistance 400 ~40M Ohm (1%+2)
Frequency
Duty Cycle
Special Functions
Auto Ranging
Diode
Continuity Buzzer
Data Hold
Full Icon Display
Sleep Mode
Low Battery Display
Input Impedance for
DC Voltage Measurement
Around 10MW
Max. Display 3999
|
|
The F09 is a new pocket-size, all-purpose, small-diameter clamp, operated with one hand.
Ideal for U1000RO2V-1X185 2and H07RNF-1x70 cables2 or 20mmx5mm bars, it is a professional measurement tool (600V Cat.III). Fully automatic, TRMS AC+DC, the F09 is a must for all your measurements
# clamping: ø26mm
# AC and DC intensity: 0.20 to 40/400A (600A peak)
# AC and DC voltage: 0.20 to 40/400/600V (900V peak)
# phase rotation (2-wire)
# inrush current
# power (single & three phased): 5W to 240kW ; 5 to 240kvar ; 5 to 240kVA
# power factor
# Hz frequency
# auto AC/DC - Hold
# automatic DC zero
# resistance: 0 to 40kΩ
# continuity / buzzer
# diode test
# min/max/peak
# automatic lead compensation
# backlit display
# range overrun buzzer
# battery charge level
# automatic stop
# dangerous voltage signal
# dimensions: 70 x 193 x 37mm - weight: 260g
|
|
|
|
|
|
TRMS AC/DC clamp-on multimeter, 10,000-count dual display, 600 V CAT IV
When used as a multimeter, the MX 675 measures voltages and currents (AC & DC), as well as resistances, and can be used to test diodes and continuity. In addition, it also determines the frequencies of the voltages and currents.
The 10,000-count dual display on this clamp is a major advantage! Users can instantaneously view the values of 2 distinct measurements, such as the intensity and the voltage. Blue backlighting ensures that it is easy to read whatever the conditions.
Temperature measurement is also possible with the K thermocouple sensor covering a range from –40 °C to +1,200 °C.
Additional specifications:
DC current: 0.05 to 1,400 A (3 calibres)
AC current: 0.05 to 1,000 A (2 calibres)
DC voltage: 0.2 to 1,400 V (2 calibres)
AC voltage: 0.5 to 1,000 V
Resistance: 0.2 Ω to 10 kΩ (2 calibres)
Frequency A: 20 Hz to 10 kHz (2 calibres)
Frequency V: 10 Hz to 10 kHz (2 calibres)
Diode test and audible continuity
HOLD, MIN, MAX, Peak and DZero functions
Clamping diameter 40 mm
|
|
200A AC Mini Clamp Meter/Voltage Detector
Convenient compact size clamp meter with built-in AC Voltage detector
3-1/2 digit (2000 count) backlit LCD display
Measures AC Current up to 200A with 100mA resolution
2% basic ACA accuracy
0.9" (23mm) jaw opening
Built-in non-contact AC Voltage detector (120/240VAC, 50/60Hz) via clamp tip plus flashlight
|
|
F170
True RMS Digital Power Meter (3-phase)
The F170 is a True-RMS digital power meter including the energy integration function. This user friendly meter has many applications; appliance testing, checking industrial and commercial power systems, plant maintenance and inspection, and electric utility testing, etc.
Features
- CE-mark Certificated.
- 3 ¨ú digits, 4000 count display for power,
updates 4 times/sec. (6 digits display for
energy integrator.)
- True power, apparent power and reactive power.
- (AC to 750kW/kVA/kVAR) measurement.
- Power Factor (Cos ¥õ) [0.3 Cap... 1 ...
0.3 Ind] measurement.
- Energy (kWh, kVAh, kVARh) Integrator for
maximum 80 hours.
- 3-Phase adaptor (Optional Accessory).
- IEC 1010-1, CATIII600V safety protection.
- Time Stamp for the Energy Integrator.
- True-RMS reading.
- Auto ranging.
- MAX/MIN Record mode.
- Data hold.
- Auto-power-off.
|
|
Need the perfect tool to troubleshoot a system?
The ACD-16’s provide a full range of measurements, enhanced with data logging capabilities, to catch what the eye can’t see. Double the efficiency, with an optional PC interface kit.
TRMS & Backlight Screen (ACD-16 TRMS Pro only)
Measurements: AC/DC Voltage up to 600V, AC
Current up to 1000A, Resistance, Frequency and
Temperature
Data-logging 5400 points
Optional PC interface capability (RS-232 KIT2)
Audible continuity
Auto power off
Automatic polarity
Low battery indication
Data hold
Large, easy to read LCD display
Accommodates conductors up to 1.77” (45mm) in
diameter
Carrying case, thermocouple, test leads, batteries
(installed) and user manual included
Voltage overload protection for all functions up to
600V AC/DC
Safety CAT III 600V
|
|
- 30mm Jaw capacity
- Auto ranging
- AC/DC amps to 400A
- AC/DC volts to 600V
- Resistance
- Continuity buzzer
- AC amps peak hold function
- Data hold function
- Auto power off
- Protected to 600V Cat III
- Includes test leads, alligator clips and protective holster
|
|
|
Dynasonics hybrid ultrasonic flow meters utilize both Doppler and transit time sound techniques and automatically select the correct technology to calculate the flow rate. This dual technology provides an accurate measurement of the volumetric flow of clean, solids-bearing or gaseous liquids on full pipes. Adverse flow conditions - surges, particulate, gas pockets, etc. - will not clog, damage or influence accuracy of the "flow-through" meter design.
|
|
|
Dynasonics TFX Ultra ultrasonic flow and energy meter clamps onto the outside of pipes and do not contact the internal liquid. Available in stand alone flow meter or as an energy flow meter used in conjunction with dual clamp-on RTDs measuring energy usage. Available in integral and remote mount systems, both in a rugged, aluminum enclosure. Reduced material costs, installation time and maintenance costs make this the ideal flow meter for nearly all liquid applications.
|
|
|
|
|
|
Clamp-on ultrasonic flowmeters
The SITRANS F US clamp-on ultrasonic flow technology offers several advantages, number one being the utilization of external transducers. These are quickly and easily mounted on the outside of the pipe, making them the perfect choice for retrofit applications and applications where corrosive, toxic or high pressure liquids and gases rule out the option of cutting the pipe.
With the use of the WideBeam technology, clamp-on flowmeters from Siemens have proven their superiority in both the field and the lab. They offer several benefits such as measurement of practically any liquid and gas; performance unaffected by viscosity, flow rate, pipe size, solids and aeration content; high accuracy and repeatability through automatic temperature compensation and zero drift correction; and installation flexibility on pipe sizes up to DN9140 (360 inches). They are available in six families: two geared towards general industry solutions and four tailored to energy, liquid hydrocarbon, gas and portable installations.
Combine this with flexible configuration options that allow you to either customize your flowmeter or to order complete systems, you can rest assured that we have the right solution for you.
|
|
|
The Series TFXL ultrasonic transit time flow meter is a reliable and cost-effective flow meter designed to replace mechanical meters where liquid conditions damage or impede operation. This non-invasive flow meter requires no maintenance, as it clamps on to the outside of the pipe. It provides a 4-20mA analog and simulated turbine meter frequency output, interfacing with a variety of monitoring equipment. The TFXL is available in an integral mount system for pipes size .5" (12mm) to 2” (50mm), and a remote system for pipes size .5" [12mm] and larger.
|
|
|
|
|
|
The battery-powered ultrasonic flowmeter FLUXUS® F601 is an ideal tool for service work and quick control measurements. Its clamp-on flow transducers are simply mounted onto the pipe from the outside and are thus quickly installed, without process interruption.
The measurement is pressure independent and can take place on pipes of almost any materials and on almost any liquid. Transducers are available for pipe diameters from 6 mm to 6500 mm and for temperatures ranging from -40°C to 400°C (more). Two pairs of transducers usually are enough to realize all standard industrial applications. FLUXUS F601 is thus highly flexible and can be used on the most various applications on totally different measuring points.
FLUXUS® F601 has been engineered for the harsh conditions of industrial installations. Its housing is water and dust tight and resistant against oil, many liquids and dirt. The meter and its many accessories are delivered in a sturdy waterproof transport case which dimensions fulfil the airline requirements for carry-on luggage.
Thanks to advanced battery management and Lithium ions battery, F601 allows for more than 14 hours of battery-powered measurement. The remaining battery capacity is displayed and helps planning measuring campaigns realistically.
Beside the standard version, F601 can also be delivered with a wider range of signal inputs and outputs (Multifunctional version), as well as in the Energy version with high precision temperature probes making the energy measurement more powerful than ever.
|
|
|
|
|
|
Our Innova-Sonic digital liquid flow meters are state-of-the-art universal transit-time instruments incorporating the latest advances in digital signal processing. The Innova-Sonic™ Portable Model 210 clamp-on features an industry-unique Bluetooth® wireless PDA interface for a truly flexible and convenient liquid flow measurement tool. Innova-Sonic™ Model 205 is our dedicated/fixed display readout version with non-invasive clamp-on transducers.
Our Innova-Sonic™ Insertion Model 205 features insertion transducers resulting in high signal strength in challenging applications and extremely large pipes.
While principally designed for clean liquid applications, all instruments in our Innova-Sonic family are tolerant of liquids with small amounts of air bubbles or suspended solids common in most industrial environments. All Innova-Sonic liquid flow meters offer low power consumption, high reliability and outstanding applicability at an economical cost.
UNIQUE PRODUCT FEATURES
- Accuracy better than +/-1%
- Wide operating temperature range -40F to +212F (-40C to 100C) (210 Innov-Sonic)
- One meter for a wide range of pipe sizes 1-200” (25mm-5000mm)
- 256MB Tungsten™ T5 PDA interface with Bluetooth wireless
- Numerical and graphical display interface
- Battery power supply with battery recharge port (including spare battery)
- Low installation effort and costs
- Wide bi-directional Flow range of 0 to 40 fps
-Measurement is independent of fluid conductivity
|
|
CTF878 Clamp-On Flowmeter
The GE Panametrics DigitalFlow™ CTF878 brings clamp-on ultrasonic gas flow metering capability to atmospheric pressure applications at velocities up to 150 ft/s (46m/s). The new CTF878 uses the correlation tag ultrasonic flow measurement technique to measure accurately and reliably the flow of natural gas, compressed air, inert gas or any other gases.
Fixed-Installation
GE Panametrics’ GC868 flowmeter is a fixed-installation flowmeter comprised of the GC868 electronics, a pair of advanced clamp-on ultrasonic transducers, a clamping fixture, a preamplifier located near the transducers and coaxial cables to connect the transducers to the preamplifier and GC868 electronics. The DigitalFlow™ GC868 flowmeter can be used to measure the flow of any gas or steam.
|
|
Low-Power, Loop-Powered Flow Transmitter
The AquaTrans™ UTX878 ultrasonic flowmeter brings the simplicity of loop-powered installation to clamp-on ultrasonic flow measurement in a low-cost package that remains full of features such as a large display and integral keypad. The UTX878 utilizes new transducer technology that allows the meter to operate with as low as 60mW of power, which makes the UTX878 the perfect fit for applications with minimal power requirements.
- Loop-powered
- Operates with as low as 60mW of power
- Velocity, volumetric flow
- 1/2" to 16" pipes
- External keypad for field programming
- Large Display
- Low-cost
|
|
KROHNE’s OPTISONIC 6300 stands for continuity and long term reliability. Flow measurement can be done anywhere and start-up is immediate. The new OPTISONIC 6300 clamp-on flowmeter with its robust industrial construction and regreasing concept provides a revolutionary solution for easy handling.
|
|
|
The Preso ThermoTrack is a non-invasive ultrasonic flow meter combined with non-invasive temperature sensors, to measure energy use in water-based HVAC systems. No sensors come in contact with the liquid and there are no moving parts, so downtime and maintenance are eliminated. The flow meter utilizes transit time ultrasonic technology and the temperature sensors are Pt1000 RTDs. The flow rate, supply line temperature and return line temperature measurements provide the necessary inputs to calculate energy use, displayed in BTUs, Calories or Watts. The ThermoTrack is available for pipe sizes 1/2" (12 mm) and larger, with a variety of power supply and output options available.
|
|
|
|
|
|
Fuji clampOn ultrasonic flowmeters are used for measuring liquid and gas flows in full pipes without beaking into them. In use on pipes from 13mm to 6 Metres!!
Particular advantage: The clamp-on mounting of the ultrasonic sensors, so that any cutting of the pipe is unnecessary and pressure loss can be avoided. The clamp-on measurement is available either as a portable, battery run version, or as a non-withdrawable type.
The TimeDelta-C can convince as well by its easy handling, its enlarged options for diagnosis and analysis and its particular measurement stability, even under difficult conditions. Due to the highly efficient 32bit technology the modern DSP-technique and the new Anti bubble management function the TimeDelta-C can be run under operating conditions, that until now have been considered as impossible for the clamp-on ultrasonic measurement.
Media
transparent liquids or liquids containing bubbles or solids, from outside through the pipe.
Typical Applications
Liquid flows (water, chemical products, refined or raw petroleum products)
All pipe types even rusty with or without coating (steel, stainless steel, asbestos cement, cast iron)
Magnetic flow meter verification
Network management
|
|
Portable Clamp-On Gas Flowmeter
The GE Panametrics’ TransPort PT878GC brings clamp-on ultrasonic gas flow metering capability to the portable level. Designed for natural gas pipeline, compressed air, inert gas or any compressed gas applications, the new PT878GC has the ability to measure gas flow rates, log data to internal memory and export flow data to a PC.
- Noninvasive clamp-on transducers
- Temperatures up to 230 degrees C
- Velocity, volumetric, totalized actual and standard flow
- 3/4 to 24 inch pipe size capability
- Built-in datalogger for 100,000 measurements
- Built-in ultrasonic pipe-thickness gage (optional)
|
|
The TransPort PT878 flowmeter packs big features into a compact, light package. Its built-in datalogger can store more than 100,000 data points and up to 32 sets of site location parameters. You can add an optional built-in ultrasonic thickness gage. Temperature transducers are available for measuring energy flow rate. The rechargeable battery provides six to eight hours of continuous remote operation. The unit has a built-in infrared port to transfer datalog, site and other files to your PC. A rugged, sealed enclosure provides IP67 submersibility to protect the PT878 if it should accidentally fall into water.
- Noninvasive clamp-on or wetted transducers
- Flow range 0.1 to 40 ft/s (0.03 to 12.2 m/s)
- Velocity, volumetric, energy and totalized flow
- Built-in datalogger for 100,000 measurements
- Built-in ultrasonic pipe-thickness gage (optional)
- RTDs for energy flow measurement (optional)
|
|
To carry out accurate measurements and rather than having to bore your pipes and being limited in control points, think ultrasounds and clamp-on probes : Think ULTRAFLUX !
The UF 801-P is a portable flowmeter. It is designed for field operations. Measurements are immediate and presented in both graphic and alpha-numeric formats.
Its sensitivity and its accuracy on any size of pipe make it an outstanding portable device. Let's also mention the following original features : memory and display capacities, thickness and temperature measurements.
|
|
|
|
|
|
The Thermo Scientific DCT6088 is an advanced transit time ultrasonic flowmeter which utilizes a unique digital correlation technique to measure the flow of clean liquids. The non-intrusive design can be applied to pipes of all sizes which helps reduce installation cost and service downtime. This completely eliminates pressure loss and leakage in pipes.
Product Detail
The DCT6088 is the world's most advanced transit time flowmeter. Combining digital signal processing (DSP) with correlation detection methods, it features exceptional performance and flexibility. While principally designed for clean liquid applications, the instrument is tolerant of liquids with higher concentrations of gas bubbles or entrained solids than was previously possible with transit time technology. The non-intrusive, clamp-on transducers can be installed without flow interruption and ensure leak free measurements with zero pressure drop. The simple menu-driven operation of the DCT6088 allows the meter to be commissioned in a fraction of the time necessary for competitive transit time flowmeters.
|
|
The MINISONIC P & P-B flowmeters are THE new portable metering tools.
Features include :
- a massive battery life : up to 40 h
- very light weight at 850 g
- Ingress protection IP 67
New measurement technology 'ESC' (or Echo Shape Control), this is an automatic function, essentially an ultrasonic auto-focus, which offers the warranty of quick, sure and accurate flow measurement.
The dual pipe version can calculate, display and transmit a QT flow value equal to the sum or the difference of the two flows that device measures on two independent pipes. It is possible to install the two set of transducers on a same pipe and closed to each other to improve the measurement reliability or better at two different locations and do a line balance or a leak detection.
The portable MINISONIC offer other important advantages :
- measurement resolution < 0.1 ns
- A higher amplification gain range and noise rejection
- an ergonomic keypad and menu calibration, back-lighted display
|
|
|
|
|
|
Clamp-on Ultrasonic Flowmeter with DSP Technology
The MUL-310 is a "Time of flight" type Ultrasonic Flowmeter for liquids. Since the ultrasonic receiver required for the flow measurement is installed by the clamp-on system on the exterior of the pipe, it does not contact the measuring fluid at all, and also there are no concerns about particle generation or contamination of metallic ions in the fluid as it is truly non-invasive. It is suitable for the flow rate measurement of pure water and ultra pure water for the semiconductor industry. The resistance to bubble interference in the signal has been sharply improved by the new signal process method "DSP"(Digital Signal Processor). If bubbles are contained in the fluid, the transmission of the ultrasonic signal is impeded and signal recognition becomes difficult resulting in a loss of signal. Digital Signal Processing technology has been adopted for MUL-310, and even if the bubbles are contained in the fluid, the stable measurement of signal can be achieved. This product does not have limitations in terms of volume of bubbles by air volume being less than 10%. (It is not possible to recognize the signal in case of fluid streams with excessive bubbles)
|
|
Now available in a mercury-free version, this sensor provides you with the stability, sensitivity and performance you have come to expect from the traditional Thermo Scientific Ramsey Tilt Switches. Designed to meet government regulations, the mercury-free tilt sensor helps you improve your efficiency while protecting your profits.
Product Detail
Designed to help you address environmental concerns and meet government regulations regarding mercury usage, the Thermo Scientific Ramsey Mercury-Free Tilt Sensor uses advanced technology inside the tilt probe to replicate the same performance found in traditional mercury-based Ramsey tilt switches.
A combination of opto-electronics and solid state circuitry inside the probe prevents jitter and provides stability not found in the typical non-mercury options. The precision manufacturing of the tilt probe provides sensing of a 15 degree inclination in a full 360 degrees of direction.
|
|
Static compact energy meter using ultrasonic technology
highly accurate recording of all billing data in local and district heating and cooling systems
|
|
|
|
