NC solenoid valves

DN: 1.2 mm
Voltage: 110, 220, 24 V
Temperature: -10 °C - 50 °C

... acting solenoid valves are designed to be mounted on any type of pneumatic actuator or cylinder with the advantage of merging the actuator and its control valve in a single product. It ...

DN: 10, 0.8 mm
Voltage: 12 V - 24 V
Temperature: -10 °C - 50 °C

SOLENOID VALVES 10mm The solenoid valves directly controlled are suitable for assembling on multiple or single bases; they have a low consumption of energy and have ...

DN: 0.125 in - 0.25 in
Voltage: 110, 24 V
Temperature: -10 °C - 50 °C

DIRECTLY OPERATED SOLENOID VALVES The direct control solenoid valves are particularly indicated for the assembling in any position thanks to their small dimensions. They ...

DN: 1 mm - 10 mm
Voltage: 100, 110, 200, 220 V
Temperature: -20 °C - 90 °C

A solenoid valve for hot water up to 90 degree. Increased heat resistance of the coils. Easy maintenance.

Metal free 2,3-port solenoid valve for chemical liquids MR16A rocker valve with indicator. A control valve most suited for medical/analysis equipment where low tact times are needed.

Products conforming to the International Guidelines for Explosion-proofing (IEC standards). Compatible with explosion-proof structure Exd2BT4.

DN: 25 mm - 400 mm
Temperature: 70 °C
Pressure: 16 bar

... Control Valve (N.C.) The RAF 31 electric valve is a Normally Closed (N.C) line pressure hydraulically actuated. The RAF 31 (N.C) ...

DN: 8 mm
Voltage: 24 V - 230 V
Temperature: -40 °C - 85 °C

High pressure solenoid valve for hydrogen refuelling - 500 bar - DN 8 - 2/2 NC - ATEX Based on the 1000 bar version, the HyValve 500 solenoid valve ...

DN: 15 mm
Voltage: 230, 24 V
Temperature: -40 °C - 85 °C

High pressure solenoid valve for hydrogen distribution - 500 bar - DN 15 - 2/2 NC - ATEX With the largest orifice size currently available on the market, the specialised high-pressure ...

DN: 0.5 mm
Voltage: 230, 24 V
Temperature: -50 °C - 85 °C

High pressure solenoid valve for hydrogen refuelling - 1000 bar - DN 0.5 - 2/2 NC - ATEX In our range of specialised solenoid valves for hydrogen ...

DN: 0.125 in - 2 in
Temperature: -10 °C - 140 °C
Pressure: 0.1 bar - 20 bar

... connector in line with ISO 4400 Protection class IP65 When using a connector Materials Brass housing (CW617N) Valve seat made of brass (CW617N) Interior components made of stainless steel Sealing material ...

DN: 15 mm - 98 mm
Voltage: 110, 12, 230, 24 V
Temperature: -30 °C - 180 °C

Port Refer below technical data sheet (Available BSP / NPT) End Connection Screwed / Flange Body Material SS ASTM A351 Grade CF8 / CF8M Circumstance Temp-10° C to 70° C Main Features Internal Parts are in superior corrosion ...

DN: 0.375 in - 4 in
Voltage: 110, 230, 12, 24 V
Temperature: -30 °C - 180 °C

Port Refer below technical data sheet (Available BSP / NPT)End ConnectionScrewed / FlangeBody MaterialSS ASTM A351 Grade CF8 / CF8MMedia Temp & seal o ring Circumstance Temp-10° C to 70° C Main Features Internal Parts are in superior ...

DN: 0.375, 0.5 in
Voltage: 230, 12, 24, 110 V
Temperature: -30 °C - 180 °C

... port is recommended. Preferably Over Horizontal Pipeline with the coil upright.CautionAC coil should not be used on a DC coil valve and vice versa. For DC coil max operating pressure may reduce by 1 Kg/cm2

Voltage: 24 V
Temperature: -10 °C - 50 °C
Pressure: 2 bar - 8 bar

Expressly developed for high-density sorting and recycling applications, the compact 820 ISD Series offers outstanding characteristics in terms of response time and life expectancy. The integrated 24 VDC miniaturized speed-up driver with ...

Voltage: 24 V
Temperature: -10 °C - 50 °C
Pressure: 0 bar - 5 bar

The 580 Series solenoid multi-valves are 2/2 NC type. The research about materials and new technological solutions allowed the realization of a shutter solenoid multi-valve ...

Voltage: 24 V
Temperature: -10 °C - 50 °C
Pressure: 0 bar - 8 bar

The 840 Series Pneumatic Solenoid Valves is of the 2/2 NC Type. Its innovative and advanced design gives the realization of a shutter valve with a very smooth operation ...

DN: 1.5 in - 56 in
Voltage: 12, 24, 110, 220 V
Temperature: -15 °C - 80 °C

Model BTE / BFE, a Solenoid Control Valve is an electromechanically operated valve which can substitute traditional gate, ball and butterfly valves. We manufacture both ...

DN: 1.5 in - 14 in
Voltage: 110, 220 V
Temperature: -15 °C - 80 °C

A Solenoid Control Valve is an electromechanically operated valve which can substitute traditional gate, ball and butterfly valves. Providing precise pressure control ...

DN: 1.5 in - 12 in
Voltage: 220, 110 V
Pressure: 0 bar - 144.2 bar

Model DTE / DFE , A solenoid control valve with diaphragm design, is an electromechanically operated valve which can substitute traditional gate, ball and butterfly valves. ...

DN: 0.05 mm - 2 mm
Voltage: 5 V - 24 V
Temperature: 0 °C - 50 °C

Orifice size from 0.05 to 2 mm. Media: gas or liquid Pressure range from vacuum up to 70 bars Applications: flow and pressure regulation, Venturi, vacuum Manifold mount, barb or flange on request Stainless steel or brass, FPM, EPDM, ...

DN: 4.5 mm
Voltage: 5 V - 24 V
Temperature: 5 °C - 50 °C

Pressure compensated, high turn-down ratio proporional solenoid valve. Designed primarily for flow and pressure regulations of non-corrosive gases. In a compact size of 17 mm diameter, it can regulate ...

DN: 0.8 mm - 4 mm
Voltage: 12 V - 48 V
Pressure: -1 bar - 12 bar

General purpose high flow proportional valve. Orifice up to 4 mm. Versatile seal (NBR, FPM, EPDM, PTFE, etc...) and body material (stainless steel, brass, Aluminum or plastic) available to adjust to the gas or liquid.

DN: 8 mm
Voltage: 6 V - 240 V
Temperature: -10 °C - 50 °C

Series of spool valves with hard anodized aluminum body, with static seals and high flow for NAMUR interface mounting. Available according to ATEX 2014/34/EU, in calssifications Ex nA, Ex ia, Ex dm, Ex d, Ex mb. For ...

DN: 8 mm
Voltage: 22 V - 28 V
Temperature: -25 °C - 70 °C

Series of valves with NAMUR interface in stainless steel AISI 316L, especially suitable for food, chemical, pharmaceutical, OIL&GAS and mining industry. Conforming to 2014/34/EU Directive, certified II 2Gc IIB T5 / II ...

DN: 15 mm - 50 mm
Voltage: 230, 24 V
Temperature: 50 °C

... the pilot valve can be easily removed after loosening the union nut (8) -with the system without pressure-. The magnet is fixed with a blind nut (15). This one can rotate freely in front of the valve ...

DN: 10 mm - 20 mm
Voltage: 230, 24 V
Temperature: 50 °C

... the pilot valve can be easily removed after loosening the union nut (8) -with the system without pressure-. The magnet is fixed with a blind nut (15). This one can rotate freely in front of the valve ...

DN: 2 mm - 8 mm
Voltage: 230, 24 V
Temperature: 0 °C - 50 °C

Direct action with PTFE • PVC, PTFE materials • FKM special seals, EPDM seat Function • Closed without current (NC) • Directly controlled

DN: 0.75, 0.5, 1 in
Voltage: 120 V
Temperature: -40 °C - 82 °C

Solenoid Valves are compatible with all of Walchem’s controllers. Epoxy encapsulated solenoid valves for cooling tower and boiler applications. Key Benefits: • Epoxy ...

Voltage: 24, 110, 220 V
Temperature: -5 °C - 50 °C
Pressure: 0.1 bar - 7 bar

Direct operated, Body width: 22mm, Port size: Rc1/8, Operating pressure range: 0.01~0.7 MPa.

Voltage: 6, 12, 24, 110, 220 V
Temperature: 5 °C - 50 °C
Pressure: 0 bar - 9 bar

Direct operated, Body width: 10 mm, No. of port: 3, Operating pressure range : 0~0.7 MPa, Effective orifice: 0.09~0.28 mm2, Flow : 5~15 l/min.

DN: 6 mm
Voltage: 24 V
Temperature: -10 °C - 80 °C

Product Specs Valve Type - Stainless Steel Valves Connection Size - 1" Number of Paths - 2/2 Position - Normally Closed Working Principle - Direct Acting Gasket & Diaphragm - ...

DN: 6 mm
Voltage: 24 V
Temperature: -10 °C - 80 °C

Product Specs Valve Type - General Purpose Valves Connection Size - 1/2" Number of Paths - 2/2 Position - Normally Closed Working Principle - Direct Acting Gasket & Diaphragm ...

DN: 6 mm
Voltage: 24 V
Temperature: -10 °C - 80 °C

Product Specs Valve Type - General Purpose Valves Connection Size - 1/2" Number of Paths - 2/2 Position - Normally Closed Working Principle - Direct Acting Gasket & Diaphragm ...

DN: 0.75 in
Voltage: 24, 12 V
Temperature: -54 °C - 204 °C

A solenoid operated, 2-way, normally closed, poppet-type, screw-in cartridge valve, designed for low leakage in load holding or blocking applications. Operation When de-energized, the SV08-Z0 acts ...

DN: 1.06 in
Voltage: 24, 12 V
Temperature: -54 °C - 204 °C

A solenoid operated, 2-way, normally closed, poppet-type, screw-in cartridge valve, designed for low leakage in load holding or blocking applications. Operation When de-energized, the SV12-Z0 acts ...

Voltage: 24, 12 V
Temperature: -54 °C - 204 °C
Pressure: 250 bar

A solenoid operated, 2-way, normally closed, poppet-type, screw-in cartridge valve, designed for low leakage in load holding or blocking applications. Operation When de-energized, the SV16-Z0 acts ...

Temperature: 0 °C - 60 °C
Pressure: 29 psi - 131 psi

• High reliability backed up by a long track record of success. Original poppet system and diaphragm and poppet system virtually eliminate air leaks.

Temperature: 0 °C - 50 °C
Pressure: 0 psi - 44 psi

Effective area: Standard type, pressure and vacuum typeO.1 mm2 Large flow rate type 0,2 mm2 Contributing to size and weight reduction of devices! Large flow rate type Operating pressure range 0 to 0.3 MPa [0 to 44 psi] Pressure ...

Temperature: 0 °C - 60 °C
Pressure: 0 psi - 131 psi

• Solenoid valve with explosion proof structure, for safety and reliability. Original poppet system virtually eliminates air leaks.

DN: 15 mm - 300 mm
Voltage: 380, 220, 110, 24 V
Temperature: -25 °C - 185 °C

• Connection Type Screw BSP/NPT/DIN/RC Flange DIN, GB, ANSI, JIS • Regulation accuracy: 5% • Explosion class: Non-explosion-proof ,Flameproof Exd II BT4

Voltage: 6 V - 480 V
Temperature: 180 °F
Pressure: 200 psi

... -01/636-01 Solenoid Control Valve is designed with on/off controller. It either opens or closes after receiving an electrical signal to the solenoid pilot control. This valve ...

Pressure: 400 psi

... an electrical signal to the solenoid pilot control. This valve consists of a 100G/2100G UL/ULC Listed Hytrol Main Valve, a three-way solenoid valve ...

DN: 0.79 mm - 1.59 mm
Voltage: 12 V - 24 V
Pressure: 0 bar - 69 bar

The AG Series solenoid valve gives you a highly adaptable design for practically all applications requiring flow between CV 0.019 and 0.300. This robust 2- or 3-way miniature solenoid ...

DN: 6 mm - 50 mm
Voltage: 24 V - 240 V
Temperature: -10 °C - 60 °C

EV220A is a compact servo-operated 2/2-way solenoid valve program, especially designed for use in machines and equipment with limited space. Features • For water, oil, compressed air and similar ...

DN: 5, 15 mm
Voltage: 24 V - 240 V
Pressure: 27.6 bar

... electrically by the solenoid coil. No pressure drop or flow is required to open or hold open this valve. Thus, the S6N Solenoid Valve is ideal for use as a pilot solenoid ...

DN: 0.3 mm - 4 mm
Voltage: 12, 24 V
Temperature: 0 °C - 50 °C

... cartridge concept • Compact - 80% reduction of volume vs standard threading solenoid valves • Improve mobility/portability - 80% reduction in weight vs standard threading solenoid valves • ...

DN: 1.14, 0.76, 0.51 mm
Voltage: 3, 5, 12, 24 V
Temperature: 0 °C - 50 °C

... . The X-Valve® is a miniature pneumatic solenoid valve measuring only 8 mm in width and is the ideal solution for portable applications with limited space and power. The body construction ...

DN: 32 mm - 150 mm
Temperature: -60 °C - 120 °C
Pressure: 28, 40, 52 bar

The new ICLX valves are part of the Danfoss ICV Flexline™ series. The ICLX valves are 2-step servo-operated main valves with pilot solenoid valves. ICLX ...

DN: 0.25, 0.375, 0.5 in
Pressure: 0 psi - 700 psi

The Sporlan Type XSP series solenoid valves used as secondary coolant CO2 valves are normally-closed type, in which the valve opens when the coil is energized, and closes ...