Needle valves

Pressure: 2,000 psi
Temperature: -40 °C - 74 °C

Application Ideal for use as a gauge isolation valve or applications requiring accurate throttling of pressure. Features • Compact design provides easy installation. • Fine stem threading and long taper allow precise ...

NORMAG-Special valves with high diffusion minimzed sealing

DN: 4 mm - 22 mm
Pressure: 120 bar - 400 bar

needle valve, both sides female thread, material: steel, 1.4571

DN: 0.25 in - 4.921 in
Pressure: 100 bar
Temperature: -10 °C - 100 °C

The PN40 has needle valves and the topwork and body are made of brass. It comes with a needle cone. The female thread connection is made according to the ISO 7-1 Rp standard. It is best ...

DN: 0.125 in - 1 in
Pressure: 6,000 psi
Temperature: 0 °C - 240 °C

Type needle valves with hard seat are designed for use on applications requiring complété isolation or throttling of the media. The conical métal tip press fitted ensures perfect alignment for positive ...

DN: 80 mm - 600 mm
Pressure: 25, 40, 64, 16 bar
Temperature: 0 °C - 70 °C

... allows the valve to operate in a stable and smooth manner, without vibrations and with a low operating torque. The regulation is achieved with high head losses, when the valve is less than 40% open, ...

DN: 4 mm - 8 mm
Pressure: 0 bar - 18 bar
Temperature: -10 °C - 80 °C

Gate valves Areas of application : compressed air Technical features - nickel plated brass body - handle made of resin - oil-proof rubber packings NBR - maximum working pressure : 18 bar - working temperature ...

DN: 8 mm - 25 mm
Temperature: -196 °C - 650 °C

Our 880L ultra small flow needle valve is a kind of top guide single seat valve, it has a simple structure, good sealing performance, reliable use and so on. The top guide system is effective ...

Pressure: 250 bar
Temperature: -30 °C - 120 °C
Flow rate: 42 l/min

... be locked in place. · Positive shut-off Operation The valve varies flow restriction by adjusting needle in or out and will shut off when fully closed. These Valves ...

SPECIFICALLY DESIGNED FOR PRESSURIZATION The Fluiwell-4C units are: •tools for pressurizing samples inside the vials in order •for the fluids to flow through your microfluidic system FEATURES •Made of Delrin •Compatible with any ...

DN: 12.7 mm - 50.8 mm
Pressure: 6,000 psi

Needle Valve Needle Valve type: bar stock body or forged body. Pattern: Straight or Angle. Body material: SS304, A182 F304 Seal Material: Nitrile or Viton

... Actuator to valve direct mount technology for simplified installation Options Electronic switch for remote open/close position option Stainless steel housing Replaceable Seat on needle ...

V Series Valves V Series Valves are used with full flow dispensers where feed rate adjustment is desired at the point of lubrication. Horizontal design of needle valve ...

DN: 0.125 in
Pressure: 21 bar

The DV-09 valve is an air-operated, adjustable needle valve. It is designed to apply precise, repeatable deposits from a fraction of a microliter up to continuous stripes of low to high ...

Product Feature - Excellent Flow Characteristics, High sensitivity and easy to adjust. - Proline flow control regulators with polymer, nickel-plated brass or métal bodies, external or recessed adjustment screws, offer fine adjustment, ...

DN: 0.125 in - 1 in
Pressure: 400 bar
Temperature: 0 °C - 240 °C

PCI NNV4, NRPV, NGSV needle valve has high pressure line shut off feature. They feature instrument isolation, gauge isolation and drain valve. They can provide liquid and vapor service. ...

DN: 0.25 in - 1 in
Pressure: 420 bar
Temperature: -20 °C - 250 °C

Needle valve in stainless steel for regulation and shut-of steam, gas, oil and acid. The valve is equipped with dust cap to protect the stem. Handle in stainless steel.

Pressure: 60 psi - 100 psi

... for access close to components Same mounting pattern as existing ES Series valves Can replace traditional jet or needle dispense valves used for detailing Divorced valve ...

DN: 0.125 in
Pressure: 0 bar - 400 bar

Mini Needle Valve, Tradinco T1700 Special instrumentation-needle valve for vacuum and pneumatic pressures up to 400 bar. Excellent feel and low torque allows high ...

Pressure: 125 psi

Nickel plated brass micro needle valves offer adjustable flow in a small package. MNV-10-32MM 10-32 Male UNF x 10-32 Male UNF Max Pressure 125 psi Orifice Size Flow Coefficient: Cv: Cracking ...

Pressure: 35 bar

It is used to control the flow for regulator or pipe system

Paani Precisions is one of the most renowned Brass Needle Valve Manufacturers, Suppliers and Exporter. For manufacturing these components, we ensure that fine quality of brass metal is used. Further, ...

DN: 0.25, 0.5, 0.375 in
Pressure: 150 psi
Temperature: 70 °F

The Hayward NVA Series Needle Valves are available in PVC and GF-PP, and they have FPM )-rings and a PTFE seat. The end connections are threaded only, and all valves are constructed with ...

DN: 0.25 in - 2 in
Pressure: 220, 210 bar
Temperature: 260, 240, 200 °C

TECHNICAL INFORMATION1. Needle valve2. Made of Stainless steel ASTM A182 F3163. Threaded ends according EN 10226-1 (EX ISO 7-1 e DIN 2999) gas4. Stem Packing PTFE + Graphite5. Max. Working pressure 3000 ...

DN: 0.125 in
Pressure: 70 psi - 300 psi

... Adjustable Needle Valve is a pneumatically triggered single-acting valve that can be used with an internal spring close (single action) or may be connected for air closing without the ...