|
|
The Magna Flow regulator valve with an easy to read manufacturer of micrometer dial offers an amazing 1100 precise set points to accurately control flow of gases or liquids. The extremely high CV of the Magna Flow control valve suppliers enables very high flows for whatever media is being controlled, up to 200 PSIG pressure or full vacuum. Linear flow characteristics provide easy to set and precise metering of gases and liquids for almost any application where accurate results are required.
Available in either light weight impact resistant nylon or clear polycarbonate construction, the Magna Flow Control Cock offers superior strength and corrosion resistance, making it ideal for use in hundreds of different applications. Simplicity of construction, with removable top and bottom caps, provides easy disassembly for cleaning or maintenance without removing the valve from service. Proven O-ring professional seals provide a positive zero tight shut-off. Replacement of seals, if required, is quick and easy because disassembly is simple and fast. The Magna Flow Control Valve offers all these features at a very affordable price. |
|
Leading technology in cold regenerated professional dryers (Series ecodry), heat regenerated adsorption dryers (Series concept) and also in breathing air purification technology (Series breathing star, according AS2299, ANSI Z or if maximum quality is required, according to PHARMACOPÈE EUROPÈNNE). For compressed air and technical gases.
Units available up to 350 bar ü/ 5000 psig (standard), other pressures on request.
Other applications? Talk to us! 0049 2054-934-0 Mr. Christian Ruff
Standard equipment high efficient heatless dryers:
Complete purification system consisting
ZANDER-Microfilter, series XP as prefilter
Fully automatic ZANDER adsorption dryer
with intelligence-multitronic-control device.
Standard equipment heat regenerated dryers:
Fully automatic operating adsorption dryer with externally heated regeneration air with electrical heater.
Patented vacuum regeneration, without purge air.
Compl. with maintenance free four-way cock.
Processor-control, desiccant-filling.
Inlet and outlet piping zinc galvanized.
Vessels acc. to PED seperate approval/CE-standard.
Flange connections acc. to DIN 2633.
|
|
Industrial separators, fine and superfine filtration technology for removal of liquid (e.g. water or oil) and solid
particles down to 1µ from compressed air and gases.
Efficiency at normal capacity: 99,9999% (1µ).
Residual oil content: ≤ 0,5 mg/m3 (1 bar (abs.), 20°C).
Recommended temperature range: 1,5°C - 80°C.
Standard equipment: Complete filter including automatic condensate drain.
CE mark in accordance with the Pressure Equipment Directive97/23/EC (PED) for Fluid Group 2. No CE mark is authorised under Article 3 paragraph 3 for smaller professional filters or CE mark in accordance with Article 1 paragraph 3.3.
Filters suitable for Fluid Group 1 see page 20.
As an option available DELTATRONIC filter monitoring. Real messurement of filter status incl. software to minimize the operating cost in relation to the differential pressure of each Filter.
Also available:
-Paint compatible filters
-High pressure filters (up to 350 bar ü / 5000 psig)
-Stainless steal filters
-Vent filters
-Filter industrial silencer
-Activated charcoal filter elements
-Sterile- and steam strainers
-Filter elements for competitor housings |
|
CNG Series
Single Tower Natural Gas Professional dryers
CNG Series adsorbers are single tower dryers designed to remove water vapor from Compressed Natural Gas in small to medium gas flow rates. Located at the inlet of the booster compression train, our unique binderless molecular sieve insures dry, pipeline quality gas (-80°F dew point or better) with minimal odorant fading.
Mobile, stationary and contracted regeneration packages available.
Single tower adsorption towers are an economical alternative to twin tower drying systems in CNG vehicular fueling stations which see intermittent or small gas flow rates (up to 300 scfm).
Down-flow design minimizes fluidization of the adsorbent insuring maximum life.
Optional Moisture Monitor & Alarm package for early performance degradation alert.
|
|
The stack is no place to take chances. After all, it's not enough to be in compliance. You also have to prove it. Which is why people choose Thermo for source emissions monitoring needs.
A lot of models available. |
|
The DS2 Docking Station provides the ultimate flexibility for managing your gas professional monitors wherever you use them. The DS2 gives you all of the benefits of consistent automated calibration, record keeping, battery recharging and instrument diagnostics for your monitors to limit your liabilities and safety hazards. Two way wireless and/or ethernet connectivity enables you to link up to 100 stand-alone Instrument Docking Stations (IDSs) from remote locations anywhere in your facility and relay the data back to one central database for total instrument management. A graphical user interface tool (DSSAC) allows an administrator to view operations on each Docking Station from a network computer, making it easy to track instruments, print reports, set events and change parameters for any location.
|
|
A family of high accuracy density measuring instruments allowing density and density related measurements for gases and liquefied gases, at actual process conditions with a selection, of "in line" and "on line" configurations.
Several products available. |
|
KOFLOC MFC-Gas Professional mixer (8300)
The KOFLOC MFC-Gas Mixer (8300) integrates 3 KOFLOC Gas Mass Flow Controller MODEL 8300 SERIES and a gas mixer in one convenient package. The result is a compact device that not only saves space and avoids clattering, but a unit with superior performance than a conventional system of separate mass flow regulation, a gas mixer and professional piping. The KOFLOC MFC-Gas Mixer (8300) is especially suited for burn control applications by greatly reducing flame flickering and stabilizing burn better than conventional setup.
FEATURES
- High-lift actuator specifications for large flows
- Single 24 VDC power source
- Choice of RS232C or RS485 interface
- Standard totalizer function
- 14-bit industrial converter for 4-1/2-digit professional display and operation
- Isolated thermal sensor for measuring inflammable gases
- Choice of SUS316L or SUS316 stainless steel
- Standard dimensions and professional fittings for easy replacement
- Free mounting position
- SV setting, plus 5 pattern settings
- Auto-zero function
- Wide selection of fittings, professional seals, wetted materials and communication professional interfaces
- Easy maintenance
APPLICATIONS
♦ Gas mixing
♦ Burn control |
|
Since 1984 B&B Thermo-Technik develop and manufacture successfully industrial temperature probes.
New ideas were always a reason why B&B is one step further than its competitors. Our customers are the focus of our thinking and acting. For them we investigate, analize and realize almost everything in the temperature measurement.
B&B Thermo-Technik is specialized in the production of gas analysis probes. Just send us your inquiry and we will supply you with an detailed offer and the solution for your measuring problem.
You will find our range of standard sensors in our Online-Shop:
www.temperature-shop.eu
There you will also get more information about our range of temperature measuring technics:
- Temperature / Manufacturer of humidity sensors
- Thermocouple manufacturers Connectors suppliers
- Digital Thermomters
- Infrared Thermomters
- Stationary Pyrometers
- Controllers
- Indicators
- Data Loggers
- Hygrometers
- Professional transmitters |
|
Bühler Unheated sample gas probe with shut off cock and in-situ filter
For dust concentration up to 200g/m³, no condensate containing gases
For hazardous areas, no internal ignition point
Technical Data:
Material: 1.4571, industrial ball valve 1.4408
Professional seals: PTFE/graphite/1.4404 and see filter element
Operating temperature: max. 200°C
Max. working pressure: 6 bar
Order information: Base unit:
GAS 222.30 p/n 4622230
Options:
To customize the base unit to meet the needs of any application, please refer to data sheet DE461099 "Accessories for Gas Sample Probes.
Unheated extensions
Professional filters
Calibration gas port
ANSI flange 3"
Manufacturer of pneumatic actuator
Blowback
Blowback control unit |
|
The gas sample probes are used for continuous extraction of gases from dust loaden, high temperature or humid processes for the gas analysis.
Unheated, heated, explosion proof and portable versions are available.
Due to its modular design the gas sample probes can be adapted to nearly all process conditions.
. |
|
Bühler Heated sample gas probe with downstream filter and weather protection shield
Filter can be replaced without tools
Effective insulation and protection shield
Self-regulating up to 80°C
Dust concentration up to 2g/m³
This probe is approved for use in Zone 1, 21 and for gas sampling from Zone 0, 20 (hazardous areas)*.
Technical Data:
Material: 1.4571
Professional seals: Graphite/1.4404 and see filter elements
Max. working pressure: 6 bar
Max. flow 1000 l/h
Max. inlet temperature process media 135°C
Voltage: 230 V, 50/60Hz
or 115 V, 50/60Hz
External circuit-breaker Type C:
2A for 230 V, 50/60Hz
3A for 115 V, 50/60Hz
Ambient temperature -20 to +50°C
Temperature: self-regulating approx. +80°C
Ex-marking of the basic unit *:
1GD / 2GD T4 T130°C
Order information: Baise units:
GAS 222.20 Atex 230V p/n 4622220X2
GAS 222.20 Atex 115V p/n 4622220X1
Options:
To customize the base unit to meet the needs of any application, please refer to data sheet DE461099 "Accessories for Gas Sample Probes.
Various probe tubes
Unheated extensions
Industrial filters
Calibration gas port
ANSI flange 3"
* Please note that installed accessories may change the approved category of the probe. (Regard type plate and operating instructions) |
|
| The FlowSorb III is an entry-level single-point and multipoint BET surface area instrument. The FlowSorb measures surface area using the flowing gas method, which involves the continuous flow of an adsorptive and inert gas mixture over the sample at atmospheric pressure. It is ruggedly constructed and ideal for demanding analytical environments. |
|
Micromeritics introduces the TriStar II 3020, a fully automated, three-station surface area and porosity professional analyzer capable of increasing the speed and efficiency of quality control analyses, with the accuracy, resolution, and data reduction to meet most research requirements. The three analysis ports operate simultaneously and independently of one another. For additional throughput, four TriStars can be operated with one computer. The speed and accuracy of the Tristar II make it an ideal instrument for a wide variety of applications that include pharmaceuticals, catalysts, carbon, cosmetics, paints, pigments, geoscience, industrial fuel cells, high-tech ceramics, and much more.
The new TriStar II features a dedicated Po port, allowing the measurement of saturation pressure on a continuous basis. A 2.75-liter Dewar and extended length sample tubes allow complete adsorption and desorption isotherms to be collected without operator intervention. The TriStar II can collect up to 1000 data points. Fine details of the isotherm can be observed and recorded providing high resolution and revealing pore structure details. The instrument also features a krypton option, allowing precise measurements in the very low surface area range.
The TriStar II also combines versatility in analysis methods, data reduction, and reporting to allow the user to optimize analyses to specific applications. Reports include adsorption and desorption isotherms, BET surface area, mesopore pore size and area distributions, Statistical Process control (SPC), new isotherm and thickness models, isosteric heat of adsorption, and integrated DFT models. |
|
LAND has a range of dust, smoke and particulates industrial monitors which are the most advanced available, using patented measurement technology to give high accuracy.
The analysers (which comprise a professional transmitter and a reflector) are mounted across the stack, the optical measurement technique uses no moving parts, giving the highest possible reliability with very low maintenance. |
|
| The Clif Mock sample probe was the first truly isokinetic sampler available for crude oil sampling and is still the most accurate and reliable method for extracting a sample from a pipeline for BS & W analysis. Designed to be used with C-22 Isokinetic Professional samplers, the CD20 drive units are available in four configurations and are capable of pulse counting, timing, pacing from computer and sending out a "loss-of-signal" alarm. In the last few years, there has been increasing demand for much more elaborate systems. These CLIF MOCK True Cut™ systems commonly have multiple receptacles for separate products or batching operations and have controllers, which interface with central computer systems. |
|
| ... products without technical information |
| |
The VENUS ball valve suppliers, with full bore, guarantees a high working reliability at low pressure in gas installations: is certified DIN DVGW by the German gas institute, and BRITISH GAS by the British gas institute.
Blow-out proof system, with perfect air bubble sealing, does not need any maintenance. The patented outside sealing system guarantees the maximum reliability during the time.
1 O-Ring in NBR for sealing at low pressure and vacuum.
All cocks are tested at 25 bar pressure, for a period longer than 48 hours.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
