|
|
We can control it, in your process as well
Electromotive or pneumatically driven Process Valves with bodies of stainless steel or plastic for various controlling tasks in fluids, gases or steam
|
|
Series SAV-BT Angle Seat Valve - Bronze NPT -- Low Cost, Compact Design, For Use with Gases and Liquids
Series SAV-SF Angle Seat Valve - Stainless Steel Flange -- Low Cost, Compact Design, For Use with Gases & Liquids
Series SAV-SSC Angle Seat Valve - SS Sanitary Clamp -- Low Cost, Compact Design, For Use with Gases & Liquids
Series SAV-ST Angle Seat Valve - Stainless Steel NPT -- Low Cost, Compact Design, For Use with Gases & Liquids
|
|
|
|
|
|
2/2-way Angle Seat Valves DN 8-80
The Angle Seat Valve is composed of a 2/2 way Angle Seat valve body and a pneumatically operated piston actuator, which is mounted with a stainless steel adaption to the valve body. Depending on the size, the actuators are made out of plastic or aluminium. The plastic actuators are made out of a high temperature resistant plastic. A self-adjusting gland assures reliable tightness. The gland is protected against dust and damage by a wiper, which is located in front of the gland.
The SED Angle Seat Valve is suitable to separate, pilot, dose and control liquid orgaseous media. The Angle Seat Valve can be designed to specific requirements. In applications for control engineering optimized flow characteristics are achieved by reduced cv-values and equal percentage or linear characteristic curves. Even simple solutions like noise reduction are possible.
Features
* high flow rate
* screwing for actuator assembly isolated
* from media, sealing is prior to the thread
* 360° adjustable actuator
* comprehensive modular accessories,
* even for later assembly
* actuator normally closed, normally open or double acting available
* different valve body connections, e.g. threaded socket, butt welding spigots to different standards, clamps, etc.
|
|
|
The cryogenic valves with a bellows seal that is exposed to the medium and a backup packing are also suitable for cost-effective installation in horizontal pipelines. The valves are available with globe or angle bodies made of cold-resisting stainless steel or aluminum.
|
|
This type of valve is actuated by pressure acting on a piston or diaphragm. The fluid is usually neutral e.g. air, water, hydraulic oil. The pressure range varies and is specified accordingly in a data table.
"Normally Closed" (N/C) valves of this type remain closed under spring pressure, when de-activated.
"Normally Open" (N/O) valves of this type remain open under spring pressure, when de-activated.
When pressure is connected to port "Z" the valves open or close according to type.
A separate 3/2 pilot valve is used to supply pressure to port "Z", it is mounted either directly on the actuator or remotely.
In some cases a 4/2 or 5/2 pilot valve will be required. The main valve position can be N/C or N/O. The basic position is determined by connecting the pilot valve output lines accordingly. (The direction of flow is usually indicated by an arrow or shown schematically on the body).
|
|
Series 2000VA/3000WA Hi-Flow™ Control Valve -- Globe Valves, Ideal for Steam and Water Flow Control, 1/2" to 4" Sizes, 2-Way or 3-Way
Series 2V Pneumatic Pilot Valve -- Two-Way and Three-Way Valves – Air – Water – Gas – Steam Service
Series EVA Electric Actuator -- Easily Installs Onto a Series GV Valve
Series GV1 Globe Control Valve -- Low Cost, 1" to 2" Sizes, 2-Way or 3-Way
Series GV2 & GV3 Globe Control Valve -- Low Cost, 1" to 2-1/2" Sizes, 2-Way or 3-Way
Series HGV Hand Operated Globe Valve -- Low Cost, High Pressure Rating
|
|
Globe and control valves
DN 4 – 150, globe valves and angle seat globe valves, valve bodies in stainless steel, cast bronze, cast iron, cast steel, PVC-U, connections to DIN, ISO, BS (butt weld spigots, flanges, male and female threads), seal materials: PTFE, Peek, steel-steel, manual, pneumatic and motorized operators, complete control valves available, control fittings and regulating cones, to be combined with and controlled via GEMÜ positioners and process controllers
|
|
Pipeline Isolation Valves for a Wide Range of Process Applications. Valves can be fitted with Actuation. Valves can be supplied in Straight or Angle Pattern. Hopkinsons range of globe valves offers a choice of configuration for stop/regulating, check, and combined stop and check duties
Features / Benefits
Isolation/Control
General purpose isolation stop valves
Steam/Fluid isolation achieved by the screwdown action of the Valvehead to the Seat Straight and Angle Pattern Design
Applications
General purpose, isolating and blowdown
Main steam stop and non-return valves (shell boilers)
Check feed version (shell boilers)
General drain duties
Double isolation drain duty as ‘martyr‘ valve
With parabolic valve head for precise flow control
Continuous blowdown (micrometer valve)
|
|
|
All valve series utilize a non-rotating rising stem design, with working pressures to 150,000 psi (1379 bar). Tubing sizes range from 1/4" to 1". Tubing connections utilize Autoclave Engineers coned and threaded design or our Speedbite Ferule Style connections for pressures up to 15,000 psi. Operating temperatures from -423°F to 1200°F (-252°C to 649°C). 316 stainless steel construction, other material options available.
|
|
High Pressure Needle Valves up to 60,000 PSI (414 Mpa)
FEATURES & BENEFITS
Non-rotating stem prevents galling and scoring
Vee or Regulating tip stem
Various body styles for a wide variety of applications
Integral through-holes for bracket mounting; panel mounting option is also available
Gland locking device prevents loosening of the packing gland, reducing leak potential
Designed and manufactured in the USA
SPECIFICATIONS
Working Pressure: Up to 60,000 PSI (4140 bar)
Temperature Ratings: -100 to 450°F (-73° to 232°C)
Grafoil packing available for high temperature service
End Connections: Female or Male NPT; Female H/P Cone & Thread
TYPICAL MATERIALS
316 Stainless Steel body and trim with 17-4 PH stem and glass-filled Teflon packing
|
|
FEATURES
Compliance with OSHA LOTO Standard
29 CFR Part 1910.147- Control of Hazardous Energy
Explosion-Proof Stem *
Vented Ball *
Stainless Steel and Brass Construction (A351 or 316 bar)
Welded end * (one-piece body)
Locking Handle in On and Off positions
MAWP 2000 psi (135 bar)
MAWT 400ºF (204ºC)
Flow coefficient (Cv) 1.25 to 17.35
Size range: 1/4" to 1" or 6mm to 25mm
Optional
GENERAL
The H300 Series is a high pressure instrumentation needle valve for
shutoff service on instrumentation panels.
The valves offer compact structure with relatively high-flow regulating
and long-life service. The H300 Series is rated to max. 5000 psig
(340 bar) and performs on/off service.
|
|
|
TECVAL instrumentation needle valves are designed to be used in multiple applications: back-seat needle valves (CP-04, CP-06), others which can be supplied with bridle for pattern manometer (CP-11) or with alignment sleeve (CP-13); compact design integral bonnet valves with or without positioner nut (CP-09) and the solid MULTIPORT valves with three female outlets.
|
|
FEATURES
Compact Rugged Design
Stainless Steel and Brass Construction
Panel Mountable
Quick On/Off Service
Straight and Angle Patterns Available
Sizes: 1/8" & 1/4"
LET-LOK®, Male and Female NPT ends
MAWP 300 psig at 20°C (70°F)
MAWT 400°F (204°C)
Flow coefficient (Cv) 0.1 to 0.2
Colored Nylon and Metal Handles
GENERAL
The H1200 Series standard toggle valve is a
compact design for normally closed and quick
on/off service.
Moving the handle 90 degrees upwards opens
the valve to full flow and locks it firmly in the open
position. Shifting the handle position downwards
shuts off the valve by spring return. The PTFE
soft seat at the tip of the stem provides a positive
repetitive seal.
|
|
Series HNV Needle Valve -- For Use with Gas and Liquids, Pressures Up to 6000 psi
Series NVII Needle Valve -- Economical, Pressures Up to 2000 psi, Blowout-Proof Stem
Model TNV PTFE Needle Valve -- All PTFE and PCTFE Wetted Parts
|
|
|
The H99 & H99HP Series offers a general-service valve of rugged design and construction. It is available in stainless steel to suit a wide range of services. Capable of withstanding high pressures (10,000 psig max and high temperature), this valve is typically used in severe service, high pressure sampling systems, high pressure shut down systems and test stands.
|
|
HAM-LET
HEAVY-DUTY SCREWED-BONNET
NEEDLE VALVES
H98 & H98HP SERIES
FEATURES
Blow-out Proof Stem
MAWP up to 10,000 psi (690 bar)
MAWT up to (500°F) 260°C
Size range: 1/8" to 1" or 6mm to 25mm
Packing below stem threads
GENERAL
The H98 & H98HP Series offers a severe-service valve of rugged design and construction.
It is available in stainless steel to suit a wide range of services. Capable of withstanding high
pressures (10,000 psig max and high temperature), this valve is typically used in a severe
environment, high pressure sampling systems, high pressure shut-down systems and test stands.
|
|
Manually handled valves designed to ensure a reliable and secure cut, allowing a certain flow regulation.
Pressure interval: 100 bar / 750 bar
Temperature interval: -20ºC / 600ºC
Connections: from 1/4" to 3"
Made in several alloys.
|
|
M-flow micro valves were developed for fine dosages of gases and liquids.
They are an integrated constituent of the float-rotameters by Vögtlin and are often used as separate valve units for OEM applications
– Compact, modular construction
– Stable and precise regulation
– Leak-proof when closed
– Customer specific versions
– Aluminium or stainless steel
– Different seal materials
– Straight valve, corner valve or insert
– 15 turn spindle, no hysteresis
|
|
This type of valve is actuated by pressure acting on a piston or diaphragm. The fluid is usually neutral e.g. air, water, hydraulic oil. The pressure range varies and is specified accordingly in a data table.
"Normally Closed" (N/C) valves of this type remain closed under spring pressure, when de-activated.
"Normally Open" (N/O) valves of this type remain open under spring pressure, when de-activated.
When pressure is connected to port "Z" the valves open or close according to type.
A separate 3/2 pilot valve is used to supply pressure to port "Z", it is mounted either directly on the actuator or remotely.
In some cases a 4/2 or 5/2 pilot valve will be required. The main valve position can be N/C or N/O. The basic position is determined by connecting the pilot valve output lines accordingly. (The direction of flow is usually indicated by an arrow or shown schematically on the body).
|
|
|
|
|
|
The design of Unique single seat valves is based on a combination of proven technology and innovative features that together set a new standard for cost of ownership.
The Unique Single Seat Valve is an innovative generation of single-seat valves, designed to ensure exceptional levels of hygiene and process safety, combined with a low cost of ownership. The valve is based on a modular design concept that makes parts interchangeable between different models within the range. This reduces operating costs and does away with large spare parts inventories.
The single seat valve design has a small number of moving parts, which makes it extremely reliable and very hygienic for either stopping or diverting product flow in both single and multidirectional processing installations. It also makes service and maintenance rapid, easy tasks, saving on costs.
The Unique Single Seat Valve design is based on a one-piece valve body formed from a single stainless steel disc, providing a weld-free surface and ensuring both strength and a reliable flow of product. The inner surfaces have an annealed surface finish of Ra < 0.8 µm to provide the best possible hygiene standards. The ball-shaped body does away with any dead zones that might cause bacteria accumulation, guarantees gentle product treatment because of the smooth flow paths and is extremely easy to clean. The seat ring provides enhanced CIP capabilities, and a double-acting lip seat minimizes any risk of contamination.
|
|
|
Streamlined flow valves, inside and outside screw with bellows, maintenance free, manufactured of grey cast iron PN 16, nodular cast iron PN 16-25, carbon steel and stainless steel PN40.
|
|
|
Easytop-Slanted seat valve (free-flow valve), with Viega-Press connections, with SC-Contur, valve box and top made of gunmetal in accordance with DIN 50930-6, valve seat made of stainless steel, with spindle transmission and position indication open/closed,handwheel with interchangeable medium mark green/red, with drain plug, working pressure: 16 bar (PN 16), working temperature: 90 °C, with DIN-DVGW-test mark,
|
|
High pressure globe valve HD 92 – 200 BM – PN 630 (320) – DN 10-50 (65)
Standard features
– Die-forged valve body and bonnet
– Disc and stem in one piece with stellited edge seat
– Non-turning, rising stem
– Position indicator
– Gland flange and gland ring in two separate pieces
– Yoke sleeve made of bronze
Pressure and temperature ratings
– Pressure rating up to 630 bar
– Temperature rating from -10° C up to +600° C
Materials
– 1.5415
– 1.7335
– 1.7380
– 1.4903
– 1.4571
Further materials, e.g. F92 on request
Media
Depending on the material the globe valves are suitable
for water, gas, oil and other non aggressive media
Fields of application
High temperature steam and water, Refining (Catalytic reformers
and Hydrocrackers), Petrochemical and Chemical Industries
|
|
|
Masoneilan's 31000 Series control valve is a PFA lined assembly designed for corrosive applications. It features an eccentric rotary plug design that provides tight shut off and low dynamic forces.
|
|
|
|
|
|
Technical details of Type 63:
2/2-Way pressure controlled valve
Body: RG-5, Brass, Stainless Steel
Sealing: NBR, FKM, PTFE, EPDM
Connection: G3/8-G3
Pressure range: 0-40 bar
Pressure controlled valves have a simple and sturdy design and therefore they are suitable for nearly all media up to a viscosity of 600 mm²/s. Additionally, they are immune to particles in the media. These valves are also chemical and thermal resistant because of there design. Together with a small ATEX approved control valve these valves are also suitable in hazardous areas.
Application fileds for pressure controlled valves are, for example:
- Filling systems
- Brewing equipment
- Chemical systems
- Mixing systems
- Food processing industry
- Concrete and cement industry
- Vacuum equipment
- Water treatment
- Pneumatics
Extras for pressure controlled valves are, for example:
- visual settings display
- electric indication
- manual operation
- free of oil and grease
- vacuum design
- vacuum and pressure design
- double acting actuator
- free of nonferrous heavy metal
- flanges according to ANSI
- temperatures up to +300°C
- higher pressure ranges
|
|
Needle valve with complete or brought back siege
ND (nominal diameter): 80-1000
other diameters or pressures under request
NP (nominal pressure): 10-64
MAIN TECHNICALS SPECIFICATIONS
Rising, rotating stalk.
Right model or set square
Technology: Molded
Principle: Classique
|
|
High pressure globe valve DVA – 200 AZ/BZ – PD 25 – DN 80-200
Standard features
– Die-forged valve body and bonnet
– Pressure sealing bonnet acc. to VGB-guidelines
– Shut off disc = 200 AZ
– Throttle disc = 200 BZ
– Body seat welded on integratedly
– Outside screw and yoke
– Position indicator
– Yoke sleeve supported at the top and the bottom
– By means of needle bearings
– Universal valve head for mounting actuators
Pressure and temperature ratings
– Pressure rating up to 425 bar
– Temperature rating up to +600° C
|
|
High pressure globe valve HD 91 – 200 JM – PN 320 – DN 10-65/50
Standard features
– Die-forged valve body and bonnet
– Disc and stem in one piece with stellited edge seat
– Non-turning, rising stem
– Position indicator
– Gland flange and gland ring in two separate pieces
– Yoke sleeve made of bronze
Pressure and temperature ratings
– Pressure rating up to 320 bar
– Temperature rating from -10° C up to +600° C
|
|
21000 Series
Masoneilan's 21000 Series control valve is a heavy top guided globe valve design featuring noise attenuation and anti-cavitation trim options. It is the most versatile single ported control valve on the market today, well suited to handle a wide variety of process control applications.
41005 Series
Masoneilan's 41005 Series control valve is a cage-guided globe valve design with balanced trim configurations. This product line is engineered to efficiently handle demanding process conditions, including applications with high-pressure drops and large temperature variations.
|
|
Hydratron can supply from stock a wide range of high pressure needle valves suitable for working at pressures of up to 100,000 PSI (7,000 Bar )
They are available with NPT ( 10,000 PSI ), Medium Pressure ( 20,000 PSI ) and High Pressure ( 60,000 PSI ) connections to suit 1/4", 3/8", 9/16", 3/4" and 1" OD tubing.
The valves are manufactured with wetted parts manufactured from 316 SS as standard but can be supplied with wetted parts manufactured from other exotic materials such as Hastelloy or inconel if required.
The range available from Hydratron includes air operated valves, valves fitted with replaceable seats and valves fitted with fine metering spindles.
|
|
|
|
