- Hydraulics - Pneumatics >
- Pipe, Tube and Fitting >
- Nipple
Nipples
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Diameter: 2.8 mm - 6 mm
... pressure cone and thread tube nipples are designed for use with Parker Autoclave fittings and valves. These cone and thread tube nipples are rated up to 20,000 PSI (1379 BAR). These manufactured, high ...
Diameter: 0.1 in - 2 in
Prevost's A2 fitting union reducers features a piece connection with a wide range of sizes in varying diameters and threads for different application requirements. It easily handles air, H2O and inert liquids. It has a pressure range ...
Diameter: 1 in
... contact area with the nozzle tip shows a surface machined to an accurate finish to prevent leakage between nipple and nozzle tip.ZB nipples are available in three length values to match different dimensional ...
PNR Italia
Diameter: 1 in
HW nozzles can be assembled on a variety of different nipples, with the same inlet, but with different lengths. The precision machined nipple inlet port assures precise positioning of the nozzle flat ...
PNR Italia
Diameter: 17, 27 mm
ZAA/ZAB welding nipples allow the assembly of GX, BX or KX series nozzle tips onto pipes and spray manifolds. One end of the nipple is fixed onto the pipe and the other to the nozzle tip. ZAA is a standard ...
PNR Italia
Diameter: 0.8, 0.5, 0.3 in
SM Sériés Nipples (hydraulic) up to 6000 psi connect with SM Sériés Couplers. Parker's SM Sériés are double shut-off quick couplings with manual sleeves and poppet valves. Female port end options include NPTF, O-ring ...
Parker Quick Coupling Division
The WEH® TN1 CNG receptacle is designed specifically for car refuelling. Due to the internal aerodynamic design the TN1 CNG receptacle gives low noise (no high frequency whistle) combined with maximum flow rate and fast filling. The receptacle ...
WEH GmbH Verbindungstechnik
WEH® Receptacle TN5 CNG for refueling of buses and trucks - Series The WEH® TN5 CNG receptacle is designed specifically for bus and truck refueling. Due to the internal aerodynamic design the TN5 CNG receptacle gives low noise (no high ...
WEH GmbH Verbindungstechnik
Diameter: 3 mm
The WEH® TN1 H₂ 70 MPa Receptacle is designed specifically for hydrogen refueling of fuel cell electric cars with a pressure range of 70 MPa. Due to the internal aerodynamic design the receptacle gives low noise (no high frequency ...
WEH GmbH Verbindungstechnik
Diameter: 5 mm
Nipple fitting with M3 male threads. Used to connect two components with M3 female threads and permits any angular relationship of the connected components. Features Beswick adapter fittings provide a convenient ...
Diameter: 7.9 mm
Nipple fitting with M3 and M5 male threads. Used to connect two components with M5 female and M3 female threads that do not require orientation. Max Pressure Rating: 3,000psig Features 303 Stainless Steel ...
Diameter: 0.125 in
Nipple fitting with 1/8″ NPT male threads. Used to connect two components with 1/8″ NPT female threads. Max Pressure Rating: 1,000psig Features Brass construction. Beswick adapter fittings provide a ...
Diameter: 6 mm - 150 mm
WELDING NIPPLE - STAINLESS STEEL 316L - Inox 316L
BENE INOX
Diameter: 6 mm - 150 mm
BARREL NIPPLE - STAINLESS STEEL 316L > Available diameters: DN6 to DN150 - Gas or NPT threads > Features : Tube Rolled / Welded - Schedule 20S > Pressure rating: PN50 > ISO 7-1 standard (except NPT)
BENE INOX
Diameter: 6 mm - 80 mm
PARALLEL NIPPLE - STAINLESS STEEL 316 Available diameters: DN6 to DN80 - Gas thread Iso standard
BENE INOX
Diameter: 0.5 in - 4 in
Normative Regulation : According Thread Standards NPT / BSPT / BSPP Coupling Material : Stainless Steel, Brass Gaskets Material : NBR , PTFE , PU Working Pressure : 16 Bars Connection Mechanism : Screwing Male & Female threads
Diameter: 0.25, 0.38, 0.5, 0.1, 0.75 in
NIPPLE (TAPER) The 62.000 serie are stainless steel AISI 316L threaded adaptors. Large range of configurations: nipple, reductions, T, L, etc. High performances in pressure (140 bar) and temperature ...
Diameter: 21.8, 22 mm
These stainless steel nipples from AMF ANDREAS MAIER that are used for applications that need to secure the clamping nipple. They use an adhesive to attach the clamping female nipple ...
Diameter: 0.4 in - 2 in
Pressure rates PN16 Connections solvent spigot – male thread Certificates EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission
Diameter: 0.25 in - 2 in
Pressure rates - PN10 Connections - male thread Approvals - EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission
Diameter: 0.4 in - 2 in
Pressure rates PN10 Connections male thread Certificates EURASEC Hygienic Certificate, GOST Certificate, Rostehnadzor Permission
Diameter: 3.2 mm
Hydraulic grease nipples, straight, thread NPT, 1/8" (x 27).
SAMOA Industrial, S.A.
Diameter: 6.4 mm
Long hydraulic nipples, 1/4" SAE. Long hydraulic nipples, M 6 x 1,00.
SAMOA Industrial, S.A.
Hydraulic grease nipples, 45° angled, thread metric, M 10 x 1,25.
SAMOA Industrial, S.A.
Diameter: 17 mm - 22 mm
... Screw-to-connect pressure testing The pressure testing nipples are designed to work with most fittings available (ISO 15171-2) and offer a leakage-free solution, even when using low viscosity fluids. Our test nipples ...
Diameter: 0.5 in
Diameter: 9.7, 13.2, 21, 24, 26.4 mm
Temperature Technology Ltd
Diameter: 21 mm
Temperature Technology Ltd
Diameter: 21 mm
There are many stainless steel nipples that are available from Temperature Technology. These nipples are made from SS304 and SS316. Some of the designs that are available include the weld lips and ...
Temperature Technology Ltd
Diameter: 0.125 in - 0.5 in
Stainless steel connections – Pure stainless steel fitting – For challenging applications Operating temperature -20°C to +150°C Materials Fittings made of stainless steel 1.4404 (AISI 316L) Seals made of FKM Thread DIN ...
Diameter: 0.125 in - 1 in
Standard fittings Type 100 – Brass fittings – High resilience – Nickel-plating for corrosion protection Operating temperature max. +150°C Dependent on the temperature range of the tube/pipe used Dependent on the pressure ...
Diameter: 0.1 in - 1 in
Series of standard fittings available in various configurations to adapt the connections of every installation according to one’s requirements. With threads Gas taper (BSPT) and Gas parallel (BSP)
Diameter: 1.5 mm - 22 mm
Double nipple brass design with cylindrical male thread Operating pressure:-0,95 – 25 bar Temperature range:-20 °C to +120 °C Material:Brass design Note:Male thread with machined sealing surface for sealing ring DIN ...
Mader
Diameter: 11, 5.5, 9 mm
Double nipple brass design with tapered male thread Operating pressure:-0,95 – 25 bar Temperature range:-20 °C to +120 °C Material:Brass design Price information:Due to price increases on the raw materials market, ...
Mader
Diameter: 5.3 mm - 20 mm
Double nipple brass design with tapered male thread, detachable Operating pressure:-0,95 – 25 bar Temperature range:-20 °C to +120 °C Material:Brass design Price information:Due to price increases on the raw materials ...
Mader
Diameter: 0.1 in - 1 in
1/8, 1/4, 3/8, 1/2, 3/4 and 1 in. (6, 8, 10, 15, 20 and 25mm) Description: Ideal for use with copper, brass, iron pipe on oil, natural gas, water and air lines.
Diameter: 0.5, 0.8, 1 in
Description NiroTherm Threaded adaptor, male/male thread
Diameter: 2.7 mm
Nipple for couplings I.D., Stainless steel 1.4305, for hose 4x3, AF 8, Operating pressure 0 - 35 bar, Temp. -25 °C to 200 °C
RIEGLER & Co.KG
Diameter: 50 mm
Diameter: 0.1 in - 0.8 in
Diameter: 100 mm
ISO THREADED UNIONS WELDING NIPPLES STAINLESS STEEL 316L WELDING NIPPLES
Diameter: 6 mm - 38 mm
Schwer Fittings
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining