|
|
Radar EM540: the suitable solution for tank barges, inland river and ocean going vessels
The 8" EM540 radar is especially designed to be integrated within a dedicated cargo monitoring system for inland river or ocean going vessels and tank barges.
The EM540 radar is based on the use of smart sensors including microprocessors performing signal processing. In addition to transmitting tank level, pressure, and temperature data to the central monitoring system, it offers such capabilities as self-diagnostics, self-monitoring and remote configuring.
The use of an intrinsically safe two-way digital signal transmission, between the radar and the central monitoring system, provides for an easy integration of the EM540 Radar into any type of control system.
|
|
Enrafs SmartRadar FlexLine combines modern technology with maximum flexibility. The basis for this is formed within Enrafs new FlexConn architecture which enables the tank gauging system to precisely synchronize with your application environments and requirements.
The complete digital signal processing technology, the optimum connectivity and the compact, innovative planar antennas make the SmartRadar FlexLine the ultimate measuring system.
Not only does the SmartRadar FlexLine prove its flexibility on installation, but also the level measuring system has no equal. Our new Enhanced Performance Signal processing makes it possible to measure level with extreme precision under the most difficult circumstances!
|
|
Radar Level Meter for distance, level and volume of liquids, pastes and solids
OPTIWAVE
works better than any radar ever before.
In contrast to earlier radar devices, the new OPTIWAVE with its more advanced design solutions is able to operate over a larger bandwidth. This ensures a sharper resolution and higher accuracy. The higher signal dynamics of OPTIWAVE allow the detection of even the smallest level changes.
|
|
* LST-500 Level transmitter :
A stainless steel version of its continuity output ESS, specifically for use in food industry applications. And is suitable for applications, requiring more precise level sensing than that provided by multipoint switches. And can be fitted externally 2NPT connection or externally an flange. The operating temperature range is -30to +125. The working pressure is 1.0 to 2.5 Mpa, testing rod length is 500mm. LCD disply, Providing a continuous output 0~5Vdc or 4~20mA.
* LST-1000 Level transmiter :
New developed a stainless-steel version sensor, its continuous output signal is (0~5Vdc or 4~20MA), the sensor combines the proven reliability of magnetic reed switching with resistors net worked to provide a variable output proportional to the float position (Liquid level). Testing rod length is 1000mm, standard flange mounting.
|
|
Ultrasonic Liquid Leveller
The Link Instruments ULLC2001 Ultrasonic Level Comparator is one of the most advanced Liquid Levellers on the market. Both extremely easy to use and micro-pic controlled for greater precision in measurement. The transducer is placed against the cylinder body 120mm below the calculated liquid gas level, (normally mathematically calculated). While retaining the transducer at this point the Comparator's ultrasonic level is set to around two or three divisions / bars-, by use of the 0-10 Tune Control. This gives a reference level against which the signal at the gas level / air interface is compared.
By slowly sliding the transducer up the cylinder body, you will arrive at the gas level / air interface. At this point the signal will rise sharply and this is visible on the Comparator usually as all 16 divisions / bars- appear and is due to the enhanced propagation of the Surface Acoustic Wave (SAW), across the liquid gas.
|
|
FLOMOTION 600B Ultrasonic level meters from Flomotion Systems are designed for tank level or contents measurement of liquids or bulk solids.
FLOMOTION 800C Explosion Proof
Ultrasonic level meters from Flomotion Systems are perfect for tank level or contents measurement of liquids or bulk solids.
FLOMOTION 1100 Ultrasonic level meter
Excellent for tank level or contents measurement of liquids or bulk solids.
FLOMOTION DR5000 SINGLE & DUAL PEN CHART RECORDERS Offers the best of both worlds, ink cartridge or thermal printing.
|
|
MUW-Mini Ultrasonic Level Monitor
The MUW-2000, an ultrasonic level monitor, is a small but high-cost performance level monitor in use of ultra sound. It has a compact and clean body made of polypropylene. It is suitable for level management of pure water and/or chemical substances. 4 to 20 mA DC current output, two alarm output for high and low level detection as well as RS232C output for maintenance are standard outputs. MUW-2000 enables you simple and easy level monitoring and controlling.
|
|
Enraf introduced the automatic servo level gauging technology in the mid-fifties. Soon thereafter, we introduced the first automatic level gauge for bulk liquid storage tanks was be certified by leading Weights & Measures authorities.
The latest version is the unique Advanced Tank Gauge with only a few moving parts. The ATG and XTG series microprocessor-controlled servo gauges are compact and need only a 2" mounting flange.
The Enraf Servo gauge provides optimal measuring performance in any application, and can easily be integrated with existing SmartRadar, hydrostatic, or hybrid gauging installations.
Innovative ideas are geared towards user satisfaction. After more than 45 years, Enraf is still the driving force in tank gauging.
|
|
|
|
|
|
OCIO is an innovative system for monitoring the fluid level inside atmospheric tanks. The system detects the static pressure generated by the fluid height by means of a tube inserted in the tank and displays the fluid level or volume. The new design and suitable solutions guarantee a reliable and repeated level indication.
The system is composed of:
A tube for detecting the static pressure. The tube with its end is inserted from the top of the tank and dipped in the fluid down to the bottom of the tank.
A control unit for level display and system management. The unit is provided with intuitive and complete software and allows the connection of two alarm or lock devices.
By means of the software it is possible to:
- set the type and the dimensions of the tank
- define the level alarms
- define the level indication
- define the unit of measurement
- calibrate the instrument
Depending on the set alarm levels, the control unit activates or deactivates the contact working as a remote switch starting the alarm devices or cutting the power supply off the connected equipment
|
|
|
|
|
|
Pneumatic tank contents gauges represent an economic solution for an accurate tank contents measurement with remote indication. The pneumatic tank contents gauge UNITOP requires no power supply, has an accuracy of 2 % and can be installed up to a distance of 50 m from the tank. UNITOP functions safely and reliably and with millions in daily use, is well proven.
Inspite of that it was possible to incorporate into the new instrument generation a number of ideas. The new dual scale facilitates the contents supervision of rectangular and cylindrical tanks. Indication is provided in % of liquid height and is thereby in its basic form independent of the tank shape. Naturally, for all DIN-tanks and many special tanks slide-in scales with calibration in Litres are available, as are additional scales in Litres for specially shaped tanks. All adjustment possibilities and functions are clearly shown on the dial. A robust brass connection with cap nut for connecting a 6 mm tube or hose ensure safe and airtight connection of the capillary line. A vent screw has now been integrated in the connector with which it is now easily possible to check the Zero position of the pointer. The measurement mechanism which is manufactured from highly stable engineering plastic is mounted separately from the instrument housing and thereby guarantees a stable Zero point and a high measuring accuracy. In addition, the instrument also houses an overpressure device and a consumption control with date indication.
UNITOP is available for use with the following liquids: Heating oil L, EL, diesel fuel, water and urea solution (AdBlue).
|
|
|
Innovative system for monitoring the fluid level inside atmospheric tanks. This system detects the static pressure generated by the fluid height by means of a tube and displays the fluid level up to 4 m., the volume or filling percentage. The control unit is provided with an intuitive and complete software that allows to set 2 alarm levels (SPDT) and/or activate remote alarm devices. High accuracy (+/- 1%). Very easy installation directly on the tank or at a distance up to 50 m. far.
|
|
|
|
|
|
Enrafs Field Display & Interface Unit (FDI) provides tank inventory information in the field, where it is needed. It is a versatile, EEx-d approved instrument with several interface options, which can even be part of W&M approved applications.
The design of the FDI is therefore based on reliable and uninterrupted data
supply in all circumstances. The unit can be used in stand alone mode using the Enraf Bi-phase Mark communication protocol for direct connection to an Enraf gauge, or any other gauge using this standard communication protocol in tank farms. The unit will interrogate the gauge and display its measured data.
To update its display in bigger installations where a remote tank inventory
system is available, the indicator listens to the communication between the field instrument and the remote system. When the communication between system and gauge fails, the FDI automatically takes over the scanning of the instrument to provide the measurement data in the field. After sensing the scanning from the system again, it returns to the original configuration.
|
|
| ... products without technical information |
| |
|
|
|
|
Ecotech 200 wet only rainwater sampler
The Ecotech Model 200 Wet-Only Rainwater Sampler is used for acid rain experiments. The sampler has wetted surfaces composed of inert materials to ensure that there is no contamination of rainwater due to chemically labile
species. A special version of Model 200 is also available specifically to sample snow and ice.
Features:
- Manufactured under license from Australian research institution CSIRO
- Microprocessor controlled with on-board data collection and storage facilities.
- Wet-only sampler controlled by tipping bucket pluviograph.
- Composite or multi-bottle collection.
Ecotech Rainmaster 1000 for measuring rainfall
The Rainmaster 1000 is a simple Tipping Bucket Rain Gauge used to measure rainfall. The Rainmaster 1000 collects rain water until the collection bucket tips over pouring our the water into a bottle underneath. This tipping action is calibrated to a known amount of water and the instrument will record the amount of tips to calculate the rainwater level.
- Tipping bucket operation (self emptying).
- Teflon coated bucket.
- No maintenance Teflon bearings
- Quality reed-switch contact-closure output.
- Made from corrosion resistant materials.
- Collection capability for sampling or verification.
|
|
Universal precipitation gauge using the balance principle for liquid, solid, and mixed precipitation
It does not matter whether it is drizzle, sleet, hail or snow, the new OTT Pluvio reliably and accurately measures both, the amount and the intensity of liquid, solid, and mixed precipitation.
It works according to the balance principle, taking account of external factors such as temperature and wind that could distort the results. Both, digital outputs (impulse/0.1 mm and frequency/status) and the serial interface, freely configurable as SDI-12 or RS-485, are available for transferring the data.
High-precision technology and robust design provide high accuracy and complete reliability.
Load cell and sensor electronics are hermetically sealed against damaging environmental influences. We have designed the carrier, bucket and protective housing parts to be particularly robust and we have ensured the use of high-quality materials.
|
|
The measurement of precipitation is an important element in efforts to maintain the water balance. Mierij Meteo plays its part in this respect by providing meteorological consultancy services and developing new products.
The model 200 rain gauge operates on the basis of a tipping bucket mechanism. The bucket is available in capacities that correspond with precipitation of 0.2 mm. The bucket assembly acts as a seesaw. As soon as the upper bucket is full, the lower empty bucket is lifted to be filled, while
the lower bucket is drained. The tipping bucket pivots on bearings which minimizes friction and wear. Each tip generates an electrical impulse.
The total precipitation during a certain period of time equals the number of impulses multiplied by the contents of the bucket used multiplied by a
constant. The rain gauge is designed for accurate operation with trouble-free service
|
|
Rain gauge type RG-50
Tipping bucket rain gauge sensor with collecting area of 200, 314, 400 and 500 cm. Resolution 0,1 or 0,2 mm. Simple connection of data logger.
|
|
| ... products without technical information |
| |
|
|
|
|
Ecotech 200 wet only rainwater sampler
The Ecotech Model 200 Wet-Only Rainwater Sampler is used for acid rain experiments. The sampler has wetted surfaces composed of inert materials to ensure that there is no contamination of rainwater due to chemically labile
species. A special version of Model 200 is also available specifically to sample snow and ice.
Features:
- Manufactured under license from Australian research institution CSIRO
- Microprocessor controlled with on-board data collection and storage facilities.
- Wet-only sampler controlled by tipping bucket pluviograph.
- Composite or multi-bottle collection.
Ecotech Rainmaster 1000 for measuring rainfall
The Rainmaster 1000 is a simple Tipping Bucket Rain Gauge used to measure rainfall. The Rainmaster 1000 collects rain water until the collection bucket tips over pouring our the water into a bottle underneath. This tipping action is calibrated to a known amount of water and the instrument will record the amount of tips to calculate the rainwater level.
- Tipping bucket operation (self emptying).
- Teflon coated bucket.
- No maintenance Teflon bearings
- Quality reed-switch contact-closure output.
- Made from corrosion resistant materials.
- Collection capability for sampling or verification.
|
|
Universal precipitation gauge using the balance principle for liquid, solid, and mixed precipitation
It does not matter whether it is drizzle, sleet, hail or snow, the new OTT Pluvio reliably and accurately measures both, the amount and the intensity of liquid, solid, and mixed precipitation.
It works according to the balance principle, taking account of external factors such as temperature and wind that could distort the results. Both, digital outputs (impulse/0.1 mm and frequency/status) and the serial interface, freely configurable as SDI-12 or RS-485, are available for transferring the data.
High-precision technology and robust design provide high accuracy and complete reliability.
Load cell and sensor electronics are hermetically sealed against damaging environmental influences. We have designed the carrier, bucket and protective housing parts to be particularly robust and we have ensured the use of high-quality materials.
|
|
The measurement of precipitation is an important element in efforts to maintain the water balance. Mierij Meteo plays its part in this respect by providing meteorological consultancy services and developing new products.
The model 200 rain gauge operates on the basis of a tipping bucket mechanism. The bucket is available in capacities that correspond with precipitation of 0.2 mm. The bucket assembly acts as a seesaw. As soon as the upper bucket is full, the lower empty bucket is lifted to be filled, while
the lower bucket is drained. The tipping bucket pivots on bearings which minimizes friction and wear. Each tip generates an electrical impulse.
The total precipitation during a certain period of time equals the number of impulses multiplied by the contents of the bucket used multiplied by a
constant. The rain gauge is designed for accurate operation with trouble-free service
|
|
Rain gauge type RG-50
Tipping bucket rain gauge sensor with collecting area of 200, 314, 400 and 500 cm. Resolution 0,1 or 0,2 mm. Simple connection of data logger.
|
|
| ... products without technical information |
| |
APPLICATION
Coating Thickness Analyzer is a tool for precise and accurate XRF measurement of various metallic and non-metallic coatings thickness (anticorrosive, insulating, antioxidizing, waterproof, pipe coating, etc.). Base/coating components are elements from Mg to U. System is applicable for control and monitoring of industrial processes.
FEATURES
- Automatic choice of coating thickness evaluation method for optimization of relative error of measurements,
- Remote control of analyzer electronics and software by ETHERNET interface from Workstation Device and communications with OPC server,
very simple and convenient operation and service,
- Possibility to install the measurement block under and above the measured material,
- built-in industrial computer.
For additional information, please contact us: XRF@bruker-baltic.lv
|
|
|
|
|
|
Years of development and attention to customer needs have made Thermo Scientific Niton alloy analyzers the first choice in XRF technology, bringing lab-quality elemental analysis wherever it is needed in a field-hardened package. Now, in addition to superior positive grade identification and composition analysis of alloy/metal coatings and substrates, the Niton XL3t offers the benefit of our coating thickness/coating weight measurement technology - providing an "out-of-the-box" nondestructive solution for gauging the effectiveness of coating and plating systems.
Fast and easy-to-use, the Niton XL3t 800 not only performs at line and plating bath solution analysis, but provides more accurate measurements than non-XRF technologies such as eddy current, magnetic induction, and Beta backscatter. You get precise, nondestructive multilayer coating thickness results in seconds. Testing at the plating line both increases productivity and improves process efficiency - no more over-coating or under-coating. What's more, the Niton XL3t is your answer to measuring large or irregularly shaped samples, as well as small-diameter wiring or tubing. Cutting samples for benchtop analysis are a thing of the past.
Typical applications are:
-Galvanized zinc over steel
-Zinc or zinc alloy over steel
-Hard chrome over steel
-Electroless nickel over steel
-Chrome/nickel/copper over steel, Zamak or plastic
-DACROMET coating over steel
|
|
|
The MetaPULSE System uses patented picosecond ultrasonic laser sonar (PULSE) technology to provide the industry's first production-worthy opaque film metrology tool. Its small-spot, non-contact, non-destructive technology enables on-product thickness measurements of single or multi-layer opaque films for aluminum and copper processes. In addition to thickness, the MetaPULSE identifies missing layers or interfacial problems such as poor adhesion, and characterizes material properties such as density and roughness. MetaPULSE is used by all of the top ten semiconductor manufacturers, and nearly 200 tools are currently providing production monitoring in fabs around the world.
|
|
|
|
see the results for the following category : 
