Nuts

How to choose this product

Nuts are used with bolts to assemble parts or provide motion transfer. They are tapped to be mated with a screw, a bolt or any shaft with external threads.

Applications

Nuts have two main applications:

- Parts assembly: Assembly nuts take many different many forms.

- Motion transfer: Turning the bolt moves the nut left or right. The nut-bolt system can transfer great force. It is found in vices, bar clamps, screw jacks, car jacks and similar devices. The system converts a rotational movement into a translation movement. Rarely reversible, the opposite conversion is nonetheless possible if the bolt's threads are long enough.

Technologies

The most common standard nuts include hexagonal nuts, minimum-height, or locknuts (any nut can serve the same purpose, depending on its position), cap nuts, self-locking nuts, square nuts, flanged nuts, wing nuts, castle nuts, et al. Most nuts are screwed on, though weld nuts and clinch nuts also exist.

Bibliography

247 companies | 843 industrial products

Companies per page

1 products KTR
KTR max. 100 Nm
Clamping max. 100 Nm KTR

The Clamping nut by KTR uses common dynamometric screwdrivers approximately 100 Nm. An example of which is the M42...

2 products Bolttech
Bolttech
Bearing hydraulic Bolttech

Delta Series Hydraulic Nuts are efficient tools that help in absolute tensioning of studs at same time in multi-bolt assemblies like flanges and bolted joints. The integrity...

Bolttech 10 000 psi | QD series
Splitter 10 000 psi | QD series Bolttech

The line of Destroyer Nut Splitters from BOLTECH MANNINGS provides services that avoid delays with galled or stripped nuts, and...

1 products Ham-Let
Ham-Let
Ham-Let

This high flow female nut has a 1/4 face seal size with 9/16 to 18 inch thread length....

1 products SFERACO
SFERACO 1/8 - 2
1/8 - 2", 20 bar | 2036 series SFERACO

SPECIFICATIONS : ٠ Lost wax moulding ٠ Male conic threaded...

1 products Mondial Spa
Chandler Equipment Inc.
Wing Chandler Equipment Inc.

PRODUCT #: 1010-0100 5/8" standard wing nut assembly PRODUCT #: 1010-0002 5/8"...

1 products Rego-Fix
Rego-Fix
Collet Rego-Fix

Q+ Balancing, ideal for high-speed applications Higher transferable torque, up to 80% higher gripping...

2 products HIWIN
HIWIN 30 - 1 340 kN
Precision lock 30 - 1 340 kN HIWIN

- The accuracy of the bearing assembly on ballscrews or spindles will be affected by the contact surface of the lock nuts, as well as the thread match. -...

HIWIN max. 8 148 kgf | R1 series
Lead screw and max. 8 148 kgf | R1 series HIWIN

Rotating nut - Nut and support bearing constitute an integral unit - 45-degree steel ball’s contact angle makes a better axial load. Applications: - Semi-conductor industries - Robots - Wood machines -...

1 products Hilma-Römheld
new Hilma-Römheld 60 - 150 kN
Clamping 60 - 150 kN Hilma-Römheld

Applications: For clamping and locking dies on press beds and rams. On the beds of machine tools. When the available space is limited and maximum clamping force is required. When no hydraulic unit...

1 products OTTO BILZ
OTTO BILZ SSM
Knurled SSM OTTO BILZ

Adjusting nut type...

Conbraco Industries 1/2 - 4
Hexagonal flange 1/2 - 4" Conbraco Industries

Designed and built with large surface to distribute load,...

2 products Titan Ti
Titan Ti
Bearing hydraulic Titan Ti

A hydraulic nut incorporates its own internal hydraulic jack. This enables large diameter bolts to be tensioned with ease to high and accurate pre-loads.Hydraulic nuts are widely used in the oil and gas,...

Titan Ti
Hydraulic splitter Titan Ti

Cut through the biggest, hardest, most corroded nuts safely in just seconds with the Titan hydraulic nut splitter. Just place the nut splitter over...

2 products EXMAR
EXMAR BO-xxM L/S series
Flare BO-xxM L/S series EXMAR

Material stainless steel 1.4571 Ø 6 to 42 mm nominal pressure up to 630 bar -60°C to +400°C for connection of 37° flared tube ends Functional...

EXMAR NC-UEM series
NC-UEM series EXMAR

Material stainless steel 1.4571 series L, S Ø 6 to 25 mm nominal pressure up to 500 bar -60°C to +400°C nuts silver-plated...

BUENO TECHNOLOGY UN
Plastic UN BUENO TECHNOLOGY

FIT-ONE PFA fitting is designed with simplicity and easy of installation. FIT-ONE...

Huco Engineering Industries DIN 7168, DIN 176
DIN 7168, DIN 176 Huco Engineering Industries

Nuts - Round Supplied in steel, brass and Nylatron Nuts...

1 products Romani GmbH
1 products ENEMAC
ENEMAC 60 - 200 kN | ES series
Clamping 60 - 200 kN | ES series ENEMAC

With bottomed thread thread...

VERTEX MACHINERY WORKS CO. ,LTD OZ series
Clamping OZ series VERTEX MACHINERY WORKS CO. ,LTD

Collet DIN 6388, TYPE A -MILLING...

3 4 5 6 7 8 9 10 11 12
Filter by :
Refine the search
Nuts
Extend the search
Search by manufacturer
Search by catalog
Associated Terms

industrial nuts

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation