|
|
|
|
|
|
3.6V Cordless Driver Drill
- Compact and 0.4kg (0.9lbs.) lightweight and 249mm(9-13/16") overall length
- Dual position handle converts from straight to pistol grip for flexibility in tough to reach spaces
- Switch into drilling mode to drill small pilot holes or choose from 21 clutch settings to drive screws flush into wood or drywall
- Convenient forward reverse switch
- Lock button for preventing inadvertent start of the motor and also usable as a manual screwdriver
- 5 Nm(44 in/lbs.) of Max. tightening torque to power through fastening applications
- Two speeds, 200/600 RPM for better control based on the application
- 6.35mm (1/4") hex chuck for quick and easy bit changes
- Built-in LED light to illuminate the work surface
- 3.6V, 1.5Ah Sealed cylindrical lithium-ion strorage battery: EBM315
- EBM315 Lithium Ion batteries for long life (approx. 500 battery life cycles)
- Terminal cover for preventing improper short circuit
- A lithium ion battery provides a full charge evry time thanks to no memory effect
- Charger: UC3SFL with overcharge prevention circuit
|
|
|
|
|
|
18V Cordless Impact Driver
(3.0Ah Li-ion Battery)
- Compact, lightweight 1.6kg(3.5 lbs.) and short body 162mm (6-3/8")
- Powerful design, class-top tightening speed and tighteing torque 150N-m (1,330 in-lbs.)
- Powerful large cooling fan for high-motor durability
- High durability, dust resistance and long service life
- Protector protects work pieces from scratches and stains, and has high heat resistance
- Slip-resistant and comfortable soft grip handle
- Convenient 5-position Belt Hook with LED light
- Variable speed switch with electric feedback and brake and forward / reverse changeover pushing button
- Two(2) step action Switch lever (Power mode/ Save mode) (The specification may vary from country to country)
- Externally accessible carbon brushes for easy replacement
- Advanced case for excellent accomodation 18V High Capacity Battery: 3.0 Ah Lithium-ion EBM1830
- The EBM1830 Li-ion battery for long life (approx. 1500 battery life cycles)and lightweight
- The Li-ion battery is equipped with overdischarge, overheat and overcharge protection
- The Li-ion battery provides a full charge evry time thanks to no memory effect
- Interchangeable with Hitachi conventional Ni-Cd or Ni-MH batteries
New multi- voltage Charger UC18YRL:
- The UC18YRL is capable of recharging Li-ion, Ni-Cd and Ni-MH batteries from 7.2V to 18V
- Hitachi original chager technologies for overcharge, overheat and overcurrent protection
|
|
Features
- Cordless 4 Mode Impact Driver
- BTP140
- Fast Charger, Battery Cartridge
- One-Touch Mode Selection
- By operating only one lever, operation can be selected from the four :
- Also, drilling speed can be changed to the two :
- Compact and Lightweight 4-Pole Motor
- Compared with the conventional motors, motor size and weight has been reduced by 20% yet without power reduction.
|
|
|
Atlas Copco battery screwdrivers and nutrunners offer cordless freedom with no hoses or cables restraining mobility. The Atlas Copco battery tools are ranging from accurate clutch control tools to advanced transducerised battery tools for full quality control. The clutch screwdrivers are designed for optimum productivity and quality, with accurate and consistent torque control that will reduce quality problems and minimize production line down time. The transducerised battery nutrunners and screwdrivers can be programmed with advanced tightening strategies and data can be stored, for optimum quality control and productivity in the assembly process.
|
|
1-2 FIX
Product features
- Reversible function (lit display of direction)
- Fully automatic spindle lock when using the device as a screwdriver
- Rubber-coated trigger switch and soft handle
- Multifunctional charger with wall fixing device for wall or table fixing; also has a cable drum to enable the quick and easy stowage of the cable in the charger
|
|
2 speed drill
850 BM-2
Product features
- Aluminium die-cast gearbox ensures longevity
- Thermal touch protection at continuous operation
- Reversible function
- Full wave electronics and speed pre-selection for soft drilling and precise screwing
- Soft hand grip and rubberised trigger switch for fatigue-free working
- Mechanical 2-speed gear provides optimal working torques
1. speed = high torque for drilling with large drilling Ø and screwing,
2. speed = high speed for drilling with small drilling Ø
- Safety friction clutch protects the user
- Auto spindle lock for convenient change of the tools
- Euro collar Ø 43 mm with locking knob for use in the upright of sensitive drill
- 4 m rubber mains cable with patented quick lock. Available as an accessory in 4m and 6m lengths.
|
|
Secure your small screw joints, from 0.5 Ncm
The MicroTorque range of electric screwdrivers from Atlas Copco has been designed to perform consistently and precisely time after time. Whether you are manufacturing high-value consumer goods or delicate electronics, the specification of the MicroTorque range has been carefully created to match your commercial needs, making micro torque more of a science and less of an art.
Compact controller, perfect performance
The MicroTorque controller is small, yet delivers total control over screwdriver performance:
Full traceability ensured
• One to eight step programming
• 16 different P-sets
• Torque and angle control
• External torque/angle transducer control
• ToolsTalk MT supports communication with PC
• Produces graphs for detailed analysis
• Digitork and transducer compatible
|
|
Designed for extreme high production environment, the DOGA brushless motors are productive, maintenance free to reduce your cost.
Many innovating features & options are available to meet your most demanding manufacturing and quality requirements until 4,41 Nm !
The best ratio price/performance/quality at your disposal.
|
|
Electra
Available in push-to-start and lever start. Features ergonomic design, accurate torque control, external brush replacement, external torque adjustment, UL listed and CE certified.
Low ESD
Features grounded bit, carbonized housing enabling any charge received by the tool to be routed to ground.
Slip Clutch
Economical solution for high-speed performance, ergonomics and convenience.
|
|
For collated screws Type MGS from 25 - 55 mm
plasterboard, chipboard, cases, sheet materials, packing,
flooring, pre-fabricated buildings,interior fixing, caravans, funiture manufacturing, etc.
TECHNICAL DETAILS
Weight : 2 kg (4.4 lb.)
Torgue: 20,9 N/M
Charging time: ca. 45 min.
No. of revolutions: 3000 RPM
|
|
|
With torque capacity ranging from 0.5 to 2000 Nm, Stanley's threaded fastening solutions come in multiple geometries and fit the most critical assembly requirements. Real-time monitoring, analysis, diagnostics, and configurations are available plant-wide, with networkable controls.
|
|
|
|
|
|
Electric Screwdrivers (Handheld, straight)
Torque: 0.1 - 3.2 Nm (0.9 - 28 in.lbs)
has developed a new generation of handheld electric drivers for use at assembly stations that do not have sufficient air to drive a pneumatic screwdriver. Although slightly larger than the traditional MICROMAT and MINIMAT pneumatic drivers, these new electric tools are ergonomic and available with all the standard options such as push-to-start, trigger-start, "F"-driver, ESD-proof driver, etc.
Three different motor sizes are available. The maximum available torque is 3.2 Nm (28 in.lbs). The torque is adjusted on the mechanical shut-off clutch and offers an accuracy of ±5% standard deviation. The separate low voltage power supply of 30V, respectively 35V, assures safe operation.
Our standard accessory program of bits and sockets can be used with these new electric tools. If the use of finders (without screw-suction) is required, we offer a complete program of Bitholders with pressed-in Finders and Bits.
If the use of finders (with screw-suction) is required, we offer a finder connection set (Optional Equipment).
|
|
|
Ingersoll Rand electric screwdrivers provide unmatched capability when driving small screws into metal or plastic in industrial assembly applications. Without the need for a a plant air supply, simply plug in the tool (for high-torque models) or controller (for low-torque models) directly into your wall outlet and you're ready to start production. The broad platform includes models offering enhanced ergonomic designs and grip surfaces, ESD-safe housings, and exceptional performance in low-torque applications.
|
|
Screw Driver (Variable Speed, Reversible)
- High-power motor: Class-top power input USA, Canada: 750W , Other country: 620W
- Class-top short length of grip portion 206mm (8-1/8") For good weight balance
- Ergonomic design for better operation:
Soft grip housing and handle cover, a new big switch trigger, soft protect cover, on gear cover and inner cover, and one motion detachable locator for better operation
- Robust aluminum gear cover and inner cover
- Class-top low noise 76 dB(A)
- 7.5m(24.6ft.) long cord for covenience in the work site (for USA, Canada, Europe, Russia and Oceania)
|
|
The improvement of productivity, quality and customization along with a close customer association, has been the driving force in the development of the CP screwfeeder range.
Cost effective solution
- Our screwfeeder range is an assembly of modular parts
- Each part of the assembly is a standard module
- Each module is easy to change thus provides a flexible solution
Servicing
- Simple procedure to order via the CP Application Center
- All module parts in stock
- Easy to install: no special tools required
- Mechanical assembly components fully designed with 3D CAD system (proe, step or iges format) based also on your 3D specifications.
|
|
For collated screws type MGS from 25 - 55 mm( 1" -2-1/4")
plasterboard, chipboard, cases, sheet materials, packing,
flooring, pre-fabricated buildings, interior fixing, caravans, funiture manufacturing, etc.
TECHNICAL DETAILS
Weight:1,6 kg (3.52 lb.)
Height: 180 mm (7.087 in.)
Length:420 mm (16.535in.)
Voltage: 220V / 50 Hz
Power: 480 W
No. of revolutions: 4650 RPM
|
|
|
|
|
|
DS300-S2
Capable of driving all SENCO® DuraSpin screws from 1-5/8" - 3" in length, this tool is ideal for wood screw applications. The SENCO DuraSpin DS300-S2 collated screw system comes conveniently assembled to a rugged 2,500 rpm SENCO screwdriver. The DS300-S2 comes complete with the DuraSpin collated screw feed system mounted on a screwdriver, a flooring extension, a rugged carrying case, and two spare bits.
Features:
Patented SENCO DuraSpin feed system drives screws quickly and efficiently without jams or misfeeds.
Ergonomic design - May be used with a one-handed or two-handed grip. Cushioned second hand grip provides added comfort and reduced exertion.
Flooring extension included - Allows screws to be driven efficiently from a comfortable standing position.
Easy Depth-of-Drive Adjustment - Just turn the thumb screw to regulate the precise amount of countersink.
Quick Release - Feed system snaps off to give easy bit access.
Adjustable Nose Piece - Easily adjusts tool for screw sizes from 1-5/8" - 3" (41 mm - 75 mm).
Super-Tough Drive Bits - Outlasts the competition.
SENCO's Full One-Year Warranty.
Modular design - Snaps together with or without flooring extension, quickly and easily, with no tools.
|
|
Cordless Auto Feed Screwdriver
BFR440
Fast Charger, Battery Cartridge, Philips bit
FEATURES
- Quick Shooting
- Rotational speed has been drastically increased up to 4,000rpm from 2,000rpm of our predecessor model 6835D, ensuring smooth screwdriving and high operation efficiency.
|
|
HSP Handheld Screwdriver
with automatic feed system for screws and headless pins
- Compact and ergonomic design
- Automatic bit stroke
- Short changeover times
- Maximum flexibility
|
|
Designed for the Electronic industry and General Industry, the DOGA electric screwdrivers provide you with a wide range of torque (from 0,08 to 4,41 Nm) and rotation speed selection.
Dependng on your needs, models with or without controller are available.
|
|
The revolutionary ergonomic design along with the soft grip handle minimises grip force to provide maximum operator comfort and increase productivity
CP Industrial screwdrivers:
These tools are suitable for high production rates such as those on production/ assembly lines, where high durability is required and the tools are used frequently. Our industrial tools combine the best of quality, durability and ergonomics for your most demanding applications.
CP RediPower screwdrivers:
RediPower tools are suitable where the tool is used intermittently for industrial maintenance or non-intensive production.
|
|
|
Get it together fast and accurately with Atlas Copco pneumatic screwdrivers. For industrial assembly operations, accurate fastening and productivity go hand in hand. Atlas Copco pneumatic screwdrivers will bring quality and productivity in to the assembly process. The clutch controlled screwdrivers are designed for optimum productivity and quality, with accurate and consistent torque control that will reduce quality problems and minimize production line down time. The screwdrivers are ergonomically designed- they are light and comfortable to hold, with fast clutch release, ergonomic design and soft warm grips prevents operator strain.
|
|
The Cleco family of pneumatic tools is one of the most
diverse in the portable tool industry. With a broad
selection of clutches and motors, this line of tools covers
a wide range of torque at several speeds. Coupled with a
diverse line of attachments and throttles, these tools are
suitable for an indefinite number of applications.
|
|
CP Industrial screwdrivers:
These tools are suitable for high production rates such as those on production/ assembly lines, where high durability is required and the tools are used frequently. Our industrial tools combine the best of quality, durability and ergonomics for your most demanding applications.
CP RediPower screwdrivers:
RediPower tools are suitable where the tool is used intermittently for industrial maintenance or non-intensive production.
|
|
The large variety of our handheld Screwdrivers, offered in many different design series, provides an ideal coverage of most torque ranges.
The simple and compact air motor makes the tool lightweight and easy to operate.
Our tried and tested MICROMAT™/MINIMAT™-clutch, is the basis for an extreme high repeatability. We guarantee the user-friendliness and an unmatched lifespan, due to the constructive design, which is specialized for operation in a harsh industrial environment and because of our quality-assured production.
|
|
|
|
|
|
Joining components in today's industrial environment is much more than putting wrench to bolt. It's about finding a solution that links the operator and the joint and delivers unparalleled accuracy and repeatability. Ingersoll Rand has a superior knowledge of the threaded fastening process, acquired through years of application work with the world's leading manufacturers in the motor vehicle, aerospace, appliance, and electronics industries. We understand the interface of the tool and operator - and know how to leverage the power of ergonomically-designed equipment to maximize productivity.
Beyond just product, Ingersoll Rand's extensive capabilities help you before, during, and after your line or work area is configured for production. Presented here is Ingersoll Rand's portfolio of products and services specifically tailored to the modern assembly environment. Whether your business is assembling motor vehicles, automotive components, aircraft systems, appliances, office furniture, or consumer electronics, there is solution from Ingersoll Rand that will meet your needs and exceed your expectations.
|
|
Reversible screwdriver
V.620RF
Technical caracteristics
- Free speed : 1,800 rpm.
- Recommended working torque : 13 N.m.
- Average air consumption : 110 l/min.
- Air inlet thread : 1/4".
- Working pressure : 6.2 bar.
- Screw size : M4.
|
|
Quality intensive-use color-ringed driver bits
POZIDRIV BAGUE : 25 ou 50mm
PHILLIPS BAGUE :25 ou 50mm
TORX BAGUE :25 ou 50mm
TORX PERCE BAGUE :25 mm
NEW : 30 pc color-ringed driver bits (plastic case)
Pozidriv, phillips, plat, 6 pans, torx, torx percé
|
|
|
|