|
|
Spinner-Grip Flange Lock Nut
Spinner-GripTM Flange Lock Nuts are the latest innovation in locking nuts. Free Spinning installation eliminates the need to "wrench" the nut down the thread.
Grade 8 strength and quality, but will work with any grade of fastener.
Does not damage threads or plating on fasteners.
Locks to the part - not to the threads. (Exceptional performance in applications with heavy vibration)
Greater temperature range than nylon insert locknuts.
Hardness of 28 - 38 HRc - More effective at maintaining clamp load under vibration.
Not limited to 5 reuses, as with most other torque lock nuts.
|
|
Special fastening components SEAL LOCK® sealing nuts and HELICOIL® lock nuts
Special fastening components are manufactured on fully automatic production and assembly systems:
SEAL LOCK® sealing nuts, the cost-effective solution for reliable sealing of nut and bolt connections in threads and under head presentation against gaseous and liquid media under high pressure. (hydraulic systems, fuel systems and pneumatic systems)
The HELICOIL® lock nut with integrated HELICOIL® SCREWLOCK® is the solution for heavy-duty threaded joints with resistance to torque loss.
HELICOIL® nuts satisfy the high requirements with regard to corrosion, temperature loads, low thread friction and the reusability of threaded parts.
|
|
|
The Atlas® product line includes two basic types of threaded rivet nut products. The Atlas SpinTite® product line includes a variety of inserts which satisfy most applications where strong one side thread installation is required. Of course if a standard product does not fit your need, please contact us so that we can make other recommendations. We also offer cost effective and easy to use installation tooling for our complete line of fasteners.
|
|
AS, AC, LAS, LAC
Floating action compensates for mating hole misalignment. Available with locking or non-locking threads. Thread sizes #4 to 1/4" and M3 to M6.
LK, LKS, LKA
The PEMFLEX® design provides MIL-N-25027 locking performance without damaging mating threads. Thread sizes #2 to #10 and M2.5 to M5.
WN, WNS
Unique PEM design prevents burnouts and eliminates the need for indexing and retapping to remove weld spatter. Thread sizes #4 to 1/4" and M3 to M6.
|
|
Steel & Stainless Steel Clinching Nuts
EDM-S, EDM-SS, EDM-CLS, and EDM-CLSS
Aluminium Clinching Nuts
EDM-CLA
Clinching Nuts for Stainless Steel
EDM-SP
Lock Nuts
EDM-SL
Flush Nuts
EDM-F
Miniature Nuts
EDM-U, EDM-UL, EDM-FE, EDM-FEO, EDM-FEX, EDM-FEOX
|
|
KPS6 Used in plated thru-holes in multi-layer P.C. boards. The self-expanding shank ensures positive contact with plated thru-holes. Thread sizes #4 to #10 and M3 to M5.
SOAG, SOSG Used to ground P.C. boards to steel or aluminum chassis. Annular projecting teeth eliminate the need for serrated or starwashers to make good electrical contact with the circuit foil. Thread sizes #4, #6, and M3, M4.
KFE, KFSE
Standoffs available with or without threads for mounting into P.C. boards, for spacing or stacking.Thread sizes #4, #6 and M3.
|
|
| ... products without technical information |
| |
... see all the products in the category
Nuts
|
|
OEM specified. Designed for locking and sealing high pressure hydraulic and pneumatic systems, Pneumatic/Hydraulic Sealant contains no fillers or particles which could contaminate system fluids, foul valves, or clog fine filters and screens. Reliably cures on “as received” fasteners and controlled locking strength affords easy disassembly. Accepted by USDA.
|
|
|
The products in the ThreeBond 1300 Series are anaerobic, extra-strength sealants developed by application of our proprietary technologies. Unlike ordinary sealants and adhesives, these do not cure when exposed to air. Rather, when they penetrate into narrow gaps in metal structures they cure in the absence of air, at room temperature, without contracting. They offer excellent resistance to vibration, heat, and chemical action. They bond the joints or threads of mechanical parts and devices chemically, preventing them from loosening and leaking. Each of them is one-part and non-solvent, and therefore has good workability and is easy to use.
|
|
- Dimensions : from M3
- Field of application : Up to 170°C (with precote 80/83) plastic adhesive in microcapsules, colour: yellow, red, turquoise, white
- Sealing method : 360° coating
- Screw-in torque : Low
- Dimensions : from M3
- Field of application : Briefly up to 150°C with 3M 2510 plastic adhesive in microcapsules, colour: blue, white, orange
- Sealing method : 360° coating
- Screw-in torque : Low
|
|
|
In the MEC process, a microencapsulated, highly reactive sealing and locking agent is applied to the threads of screws, bolts, or pipes. The agent does not react until the part is tightened; then the microcapsules break, and the sealing and locking agent instantly polymerizes to prevent loosening or leaking. After MEC processing, no locking agent or sealant needs to be applied to threads; the sealing and locking properties are activated in the assembly.
|
|
| ... products without technical information |
| |
PEMSERTER® Series 2000® Press
Click for more info. An 8-ton (71.kN), fully automatic with programmable logic controller, menu driven touch screen, built in safety device and 24" throat depth.
|
|
PEMSERTER® Series 4® Press
Click for more info. A 6-ton (53.4kN), manual, pneumatic press with built in point-of-operation safety device and 18"(45.7cm)-throat depth.
PEMSERTER® Series LT/4™ Press
Click for more info. A 3-ton (26.7kN), manual pneumatic press with internal point-of-operation safety device and 10"(25.4cm)-throat depth.
|
|
Extremely simple construction, high lever operating/pressing force ratio and highest safeguard while working.
Press fundamental feature is the easy and quickie interchange and adjusting of punches and dies.
It doesn’t work with any energy source, apart the manual force, thanks to the lateral lever that with a move of 90° can enable a high pressure.
Wide use in many production lines.
|
|
TOX-Presses
The gentle giants
Power + Intelligence:
Force capacity from 2 to 2000 kN intelligently monitored
Modular Design:
Even in the selection of a standard press, you have vast possibilities to individualize your press. The modular TOX principle provides for an uncomplicated realization. Also a customized press, dimensionally and functionally.
Press frames
- C-frames
- 2 column
- 4 column
- Welded frames
Drive modules, Machine Bases, Tooling, Part Loading,
TOX-Controls; TOX-Monitoring
Perimeter Guarding, Safety Equipment
|
|
• Huck HuckLok
-Wide grip range – Accommodates a large variation in joint thicknesses
-Structural fastener - high shear & tensile strength
-Large blind side footprint – ideal for lower strength or thin sheet joint materials
-Flush pinbreak – No catching on clothes, skin or goods. Quick and easy visual inspection
-Internal pin locking mechanism – Secure within the rivet body and protected from corrosion, plus additional blind side pin locking for increased fatigue life
-Headstyles - Protuding
-Materials – Steel
-Diameters - 4.8mm, 6.4mm
|
|
• Huck BOM
-Very high strength/diameter ratio – can be used in demanding structural applications as an
alternative to threaded fasteners or welding
-Very high joint tightness when compared to conventional blind fasteners
-Very resistant to tampering, extremely hard to remove
-Excellent gap closure capability
-Large blind side footprint – ideal for lower strength or thin sheet joint materials
-Headstyles - Protuding
-Materials – Steel
-Diameters - 4.8mm, 6.4mm, 7.9mm, 9.5mm, 12.7mm, 15.9mm, 19.1mm
|
|
• Huck Auto-Bulb
-Purpose design blind side shape for easy hole locating - ideal for automated assembly
-Large blind side footprint – ideal for lower strength or thin sheet joint materials
-Good blind side clearance – less space required on the blind side prior to installation
-High pin retention prevents possibility of noise/vibration in dynamic assemblies
-Recessed pinbreak – No catching on clothes, skin or goods
-Structural fastener – high shear & tensile strength
-Headstyles -Protuding
-Materials – Steel
-Diameters - 4.8mm, 6.4mm
|
|
• Huck Magna-Bulb
-Extra large blind side footprint – ideal for lower strength or thin sheet joint materials
-Structural fastener – Very high shear strength and high tensile strength.
-Flush pinbreak – No catching on clothes, skin or goods. Quick and easy visual inspection
-Internal pin locking mechanism – Secure within the rivet body and protected from corrosion
-Headstyles - Protuding
-Materials – Steel
-Diameters - 4.8mm, 6.4mm, 7.9mm
|
|
• Huck Magna-Lok
-Wide grip range – Accommodates a large variation in joint thicknesses
-Structural fastener - high shear & tensile strength
-Excellent gap closure capability
-Outstanding hole filling on the blind side – Excellent joint tightness and very resistant to
water ingress.
-Flush pinbreak – No catching on clothes, skin or goods. Quick and easy visual inspection
-Internal pin locking mechanism – Secure within the rivet body and protected from corrosion
-Headstyles - Protuding, truss, countersunk
-Materials - Steel, stainless steel, aluminium
-Diameters - 4.8mm, 6.4mm, 9.5mm
|
|
|
... see all the products in the category
Rivets
|
|
|
see the results for the following category : 
