|
|
ALCO 250 is a high pressure white grease.
Grease with additives which has an excellent water resistance. NLGI 2
ALCO 250 has a high drop point .
It can be used from -50°C to 150°C
Has an important lubricant power.
Applications:
- High-speed movements, including under heavy loads
- Very low temperature lubrication
- Clean lubrication. |
|
Dow Corning® silicone compounds are
grease-like lubricants containing silicone
fluids and inert silica fillers. They are
resistant to oxidation and thermal
degradation while maintaining their
properties over a wide temperature range.
They are designed as release agents and
may be used as O-ring assembly lubricants,
non-conductors of electricity, non-curing
professional sealants and as assembly lubricants for
plastic and rubber parts.
Silicone compounds
may be used for applications
where they function in a dual role as both
lubricant and sealant.Molykote silicone greases contain polymeric silicone fluids as the base oil
Silicone greases operate over a wide range of temperatures, even at very low temperatures
Molykote offers heavy duty silicone greases with outstanding corrosion protection (500 h salt spray test)
Silicone greases are compatible with most plastics and elastomers
Silicone greases exhibit high water resistance and thus no water wash-out
High oxidation resistance combined with low evaporation rates make silicone greases very suitable for long term lubrication
High drop point, hence no risk of melting and running-out
|
|
Lubricating for insert
200 ml
APPLICATION
PACKAGING
Box or bag: -
Carton: 24 pz
COLOR ITEM
N001 |
|
Colorless, thin professional film
Excellent for releasing molded parts
in high temperatures or pressures
Low odor
Nonstaining
Nonflammable
Noncorrosive
Does not contain CFCs, or chlorinated solvents
|
|
SKF bearing greases:
The perfect solution for every application
SKF's vast experience in the development of rolling suppliers of bearings forms the basis for the development of a special range of lubricants, the superior quality of which is obtained through continuous testing and studies.
LGMT 2: SKF general purpose industrial and automotive bearing grease
LGMT 3: SKF general purpose industrial and automotive bearing grease
LGWA 2: SKF high load, extreme pressure, wide temperature range bearing grease
LGFP 2: SKF food compatible bearing grease
LGFL 1: SKF food compatible, low temperature bearing grease
LGFB 2: SKF food compatible, high load bearing grease
LGEP 2: SKF high load, extreme pressure (EP) bearing grease
LGEM 2: SKF High viscosity bearing grease with solid lubricants
LGEV 2: SKF Extremely high viscosity bearing grease with solid lubricants
LGLT 2: SKF low temperature, extremely high speed bearing grease
LGGB 2: SKF green biodegradable bearing grease
LGWM 1: SKF extreme pressure low temperature bearing grease
LGHB 2: SKF high load, high temperature, high viscosity bearing grease
LGHP 2: SKF high performance, high temperature bearing grease
LGET 2: SKF extreme temperature, extreme condition bearing grease |
|
Professional adhesive Chain Lubricant
Ref: ACL400
Highly tenacious
Excellent resistance to water and high temperatures
Good mechanical stability
Good penetration at low temperatures
|
|
Contact Treatment Grease CG53A
Ref: CG53A
Very good plastics compatibility
Luer lock industrial syringe dipenser
Good high and low temperature performance
Ideal for automotive switches
Contact Treatment Grease 2GX
Ref: SGB
Lubricates switches and electrical contacts
Reduces contact wear and arcing
Excellent plastics compatibility
Applicable for high and low voltage
High-quality, non-melting contact grease
Contact Treatment Oil 2
Ref: SOA
Developed in response to a requirement for an effective treatment for all types of contacts, particularly in situations where extremes of temperature and environmental conditions are encountered
Correct application will reduce contact resistance and arcing of contacts of all ratings from small relays to high capacity contactors
Can be used on all types of electrical contacts, but care should be taken to ensure that certain professional paints, rubbers, and thermoplastics are not near the area of the contact
Solvent diluted oils permeate, free and lubricate and should be used for situations where only a very thin film of oil is required, and, once the solvent has evaporated, it leaves a non-drying film of oil
|
|
In any places where machines are running, lubricants are required.
The development of production technology has been leading to more and more complex and effective plants demanding the use of high-performance lubricants for guaranteeing a safe and continuous production. However, modern high-tech production facilities need more than a standard lubricant.
Setral high-performance lubricants lead to higher outputs and additionally ensure an enormous economic efficiency.
In practice this means:
* drastically reduced friction
* thus less wear
* extended lubrication intervals
* an extremely increased lifetime of plants and machineries
* thereby also bringing about environmental protection.
|
|
Proper lubrication is essential to the successful performance of any type of bearing. Lubrication reduces friction, prevents wear, carries away heat and protects bearing surfaces from corrosion.
The greases in the Timken grease line are all selected with the above customer benefits in mind. Our engineers have taken great care to select formulas that improve performance and increase bearing life in your specific application.
Heavy Truck - Lubrication Tips from Tech Tips
Proper Lubrication Helps Ensure Long Life, Lower Cost-Per-Mile - Tech Tips Volume 1 Issue 8
Lubrication Fill Procedures for Non-Drive Axles - Tech Tips Volume 1 Issue 9
Lubrication Fill Procedures for Drive Axles - Tech Tips Volume 1 Issue 10
Lubrication Procedures for Packing a Bearing with Grease - Tech Tips Volume 3 Issue 2
Railroad - Grease Weepage
Journal Roller bearing manufacturer Grease Weepage Reference Aid
Locomotive Journal Roller Bearing Grease Weepage Inspection Guide (new)
Super Precision - Ball bearings
Lubrication of Instrument Ball Suppliers of bearings
|
|
Secure quality and solve problems
during production of transparent, white and black parts
Using a new special grease for ejector pins, bolts suppliers and
sliding elements, lubricating problems will become obsolete. Our recommendation for this area:
SYN-setral-INT/300
a life-time ejector-pin-grease which allows an extremely high number of rounds without re-lubrication and damage on tools. This, up to + 300 °C temperature-stable grease (without solids) is excellently suited for the production of transparent, white and black parts, items for the
pharmaceutical area, for multi-coloured and root-thread-tools, for sealing areas metal/metal and for "soft metal
pairings" (matching phase before hardening process).
Even tools designed for "dry running" can now be lubricated again without any problems (e.g. medical technology).
The thin high-performance lubricating film is extremely
stable against aggressive condensates and avoids grease transference via the ejector pins onto the plastic parts.
The advantages result in lower spoilage rates and increased life-time of tools.
Benefit from our experience. We would be pleased to advise you! |
|
Food Safe Lubricant
Ref: FSL400
Excellent resistance to water and high temperatures
Excellent compatibility with rubber and plastics
Good temperature range -20 to 180
Highly tenacious
|
|
High lubricating power for this lithium grease with high MoS2 content, NLGI 2 grade.
It has a high drop point. ISO 140 is anticorrosive and anti-wear, it solves heating problems by spacing out lubrications.
Can be used from -20°C to 150°C.
Applications:
- All movements, including high speeds.
- Surfacic tribo-contacts: plain or pivot bearings supplier, journals, endless screws, guidance system, professional slides.
- Hertzian tribo-contacts: ball race bearings, roller bearings manufacturer, tapered bearings, needle bearings, rollers |
|
ETERNA 2000 is a high performances machining fluid which can be
recycled. It is general-purpose (all raw materials, all types of machining), ISO classification: MAH. Soluble fluid of machining, standard true
solution, of particularly advanced design and technology. Product
answering the Eco-design professional label. Guaranteed without nitrites,
borated derivatives, organochlorinated, sulphur derivatives and heavy
metals. ETERNA 2000 is chemically and biologically stable,
ultrafiltrable, reusable. The very high cooling capacity of ETERNA 2000 allows to obtain state surface of high quality in the roughing or finishing operations. Its stability and its weak retention on pieces and chips allow an important reduction of machining fluids consumption. Not foaming,
anti-corrosive, not gumming, ETERNA 2000 also makes it possible to
obtain an environment of clean working station (produced without
mineral, vegetable or synthetic oil). |
|
PF 300 is a high performance fluorinated grease, non flammable.
Anticorrosive, anti-wear perfluorinated grease.
It is insensitive to most solvents and chemical products. Compatible with all plastics and elastomers.
High performance lubricant, usable in presence of high temperatures (260°C uninterrupted)
This grease can be used vacuum and in presence of gas including oxygen.
Applications:
- Ejecting devices in plasturgy
- Specific grease for lubrication to life
- Material of precision for spacial, aeronautical, medical and
paramedical
- chemical Industries
- Lubrication in production and use of gas, including oxygen.
- Paint industrial conveyor lines
- Lubrication of supplier of machining centers, copying units, deep-drawing machine ball columns |
|
Lubricant for elastmers and plastic materials, ALCO 220 is a silicone grease for food industries (NSF registration No. 125200 / conformity with circular DGS/VS4 N°99/217 established by the
Pasteur Institute: materials used in the fixed installations of water
distribution intended for human consumption).
It is odourless, flavourless, not staining, strongly professional adhesive.
It is completely insoluble in water and insulating.
Applications:
- Low-speed movements, cocks, professional taps, professional guides, racks, in pharmaceutical and food industries.
- Lubrication of elastomers and plastics.
- Assembly of joints. |
|
MIPO® M 15 - Molybdenumdisulphide powder for lubrication and reduction of wear. Application: As solid luricant component in lubricating greases and pastes, in dispersions (aqueous, none-aqueous) and for dry lubrication.
Method of use: Add to the lubricant in the usual concentration.
MIPO® is a MIxed POwder which is used especially as an additive for friction linings, lubricating greases, lubricating pastes, suspensions as well as for self-lubricating plastics. Its mission is to avoid annoying side effects like e.g. fading, jolting or noises when using the end product, and generally to improve its tribological attributes. MIPOs vary in composition depending on both, their end use and their base formulation as employed by our customers. |
|
Today, there are four SETCO Spindle Lubricants that service the precision spindle markets. These new high performance greases provide a substantial increase in the reliable operating speed of the spindle, or enable running at the same speed and reducing operating temperatures. Generally, it has been shown that higher operating temperatures reduce spindle bearing grease life by 50% for every 15 degrees Celsius in running bearing temperature. The new line of SETCO SSL greases typically adds 50% more service life to the grease, and therefore the spindle manufacturer of bearings. These new greases use advanced chemical formulations to enable our spindles to run faster, longer, and cooler for a competitive edge that no other spindle manufacture can offer.
Summary of SETCO SSL Products:
Exclusively formulated for SETCO by Lubcon Turmo Lubrication Inc., one of the world's premiere lubricant manufacturers.
Advanced chemical formulations enable spindles to run faster, longer, and cooler for a competitive edge no other spindle manufacturing can offer.
Reduce operating temperatures which can increase spindle bearing grease life by 50% for every 15 degrees Celsius in running bearing temperature.
Adds 50% more service life to grease for additional spindle protection. |
|
Molykote® Anti-Friction Coatings (A-F
Coatings) are paint-like products. They
contain, instead of a coloring pigment,
submicron sized particles of solid lubricants
dispersed through carefully selected resin
blends and solvents. Important for the
lubricating and corrosion protection
properties are the choice of the right raw
materials and the volume concentration of
the lubricant content. In addition to greases
and professional oils, or where possible, as replacement
of those hydrodynamic lubricants, Molykote
A-F Coatings form a lubricating film, which
helps cover surface roughness and thus
protects against surface to surface friction
(e.g. metal to metal, plastic to metal,
plastic to plastic) even under extreme
loads. They are applied by conventional
painting techniques: e.g. spraying, dipspinning
or brushing. |
|
The "ultimate lubricant for TAPTITE® screws," NYTORQ® reduces installation torque on tri-lobular type and self-threading screws during assembly operations.
Designed by Nylok to answer a problem facing virtually every company in the automotive industry, it reduces total installation costs, helps reduce operator fatigue, is non-toxic, assembler friendly and has a melting temperature at 248°F (120°C).
|
|
No matter what your industry – Food and
Beverage, Chemical, Industrial Assembly –
we have the exact products and services to
support your business.
A lubricating grease is a semi-solid product
of the dispersion of a thickening agent in
a liquid lubricant. The lubricating grease
operates by releasing the lubricating fluid
from the thickening agent and provides a
way to supply a lubricant where the use
of oil is not practical.
Molykote® high performance greases are
designed and tailored for use under
extreme conditions like extreme pressure,
harsh chemical environment, low and high
temperatures and all speeds. Molykote
greases are based on mineral oils or
synthetic fluids including silicone oils.
A number of Molykote greases contain
special additives and/or solid lubricants
like Molybdenium disulfide to provide
effective lubrication |
|
The Sapphire range consists of 11 application specific greases designed to provide superior performance in each application area and extend product life and service intervals.
|
|
|
|
