|
|
|
|
|
|
The Humble Hydraulic H Series oils are quality anti-wear hydraulic oils designed to meet the requirements of most fluid power systems. They exhibit good anti-wear properties that help reduce the wear rates in gear, vane and piston pumps. They also possess a high level of resistance to oxidation and thermal degradation that helps control the formation of system deposits. The Humble Hydraulic H line also has good water separation properties, rust and corrosion prevention, and foam resistance. They are formulated with high quality base oils and a performance additive system.
Features and Benefits
The Humble Hydraulic H Series oils provide good anti-wear protection reducing wear in pumps and actuators in open or closed-loop systems. Their high resistance to oxidation and thermal degradation helps reduce the formation of deposits and varnish. The Humble Hydraulic H Series offers the following benefits:
Good anti-wear protection improves pump life
High resistance to oxidation eliminates deposit formation and improves oil life
Good water separation properties allow easy removal of water from systems reducing potential damage to system components
|
|
|
Ongoing research and a 90-year legacy of working with leading equipment builders help ExxonMobil Marine Lubricants develop products that continually meet customer needs. With a complete line of mineral and synthetic lubricants, we offer the products your fleet's engines and equipment need to perform reliably and operate efficiently. Our flagship product line for both two- and four-stroke diesel marine engines, Mobilgard, has been shown time and again in proof-of-performance trials. Also, we offer synthetic lubricants to help improve performance benefits and economic advantages for marine equipment operating at higher temperatures and under more stress.
|
|
|
|
|
|
Mobil Gas Compressor Oil is a premium quality, high performance, synthetic gas compressor lubricant based on poly-alkylene glycol. It is primarily intended for use in gas compressors for hydrocarbon and chemical gases where the crankcases and bearings operate in a gas filled atmosphere. It is particularly suitable for marine service on vessels carrying liquefied gas cargoes. It also has application in general industry where problems with oil and gas solubility issues have resulted in less than satisfactory equipment performance. Compared with conventional mineral oil, Mobil Gas Compressor Oil has a lower gas solubility and consequently resists dilution and has improved viscosity control which results in additional protection against wear, improved efficiency and reduced foaming.
Features and Benefits
Mobil Gas Compressor Oil is a special purpose synthetic product developed to reduce the problems resulting from gas dissolving in the lubricant and causing problems with wear, sealing, increased maintenance and frequent oil changes.
|
|
|
|
|
|
Mobil Mist Lube Series are extra high performance oils designed for the oil-fog or mist-lubrication of machine components such as slideways, bearings, gears, chains etc. They are formulated from high quality, solvent refined base stocks and a unique additive system designed for optimum reclassifying properties. They have a high resistance to oxidation and good extreme pressure and anti-wear properties. The products have enhanced surface wetting capabilities and they reclassify (or agglomerate) readily from a mist to a liquid when the mist is subjected to extreme turbulence or is impinged onto a surface at high velocity. This allows a lubricating film to form on bearings and gears and prevents stray mist from escaping through narrow apertures into the atmosphere.
The four viscosity grades in the Mobil Mist Lube Series, ranging from ISO VG 32 to 460, allow the machine designer to choose the product most suitable for proper mist lubrication of machine elements. The heavier grades are used on ways, gears, and slow-speed, heavily loaded bearings, while the lower viscosity grades are used in high-speed bearings.
|
|
LGWM 2
High load, wide temperature bearing grease
SKF LGWM 2 has been developed for lubrication under a wide
temperature range, high loads and wet environments.
LGWM 2 is a synthetic-mineral oil based grease using the latest
complex calcium sulphonate thickener technology.
LGWM 2 is suitable for temperatures down to - 40 ºC.
- Excellent corrosion protection
- Excellent mechanical stability
- Excellent high load lubricating capacity
- Good false brinelling protection
- Good pumpability down to low temperatures
Typical applications:
- Wind turbines
- Heavy duty off road applications
- Snow exposed applications
- Marine applications
- Spherical roller thrust bearing applications
|
|
|
Molykote® Anti-Friction Coatings (A-F Coatings) are paint-like products. They contain, instead of a coloring pigment, submicron sized particles of solid lubricants dispersed through carefully selected resin blends and solvents. Important for the lubricating and corrosion protection properties are the choice of the right raw materials and the volume concentration of the lubricant content. In addition to greases and oils, or where possible, as replacement of those hydrodynamic lubricants, Molykote A-F Coatings form a lubricating film, which helps cover surface roughness and thus protects against surface to surface friction (e.g. metal to metal, plastic to metal, plastic to plastic) even under extreme loads. They are applied by conventional painting techniques: e.g. spraying, dipspinning or brushing.
|
|
Magnalube®-G deposits a fine protective and lubricating film on metal parts. It is virtually unaffected by corrosive moisture and will not migrate from hot surfaces. Magnalube®-G is water resistant, stable at high temperatures, resists oil separation, and is chemically and mechanically stable.
The PTFE base effectively lubricates at temperatures +600° F to -50° F. The applications are unlimited. Magnalube is the multipurpose specialty lubricant that industrial engineers can trust.
|
|
No matter what your industry – Food and Beverage, Chemical, Industrial Assembly – we have the exact products and services to support your business. A lubricating grease is a semi-solid product of the dispersion of a thickening agent in a liquid lubricant. The lubricating grease operates by releasing the lubricating fluid from the thickening agent and provides a way to supply a lubricant where the use of oil is not practical.
Molykote® high performance greases are designed and tailored for use under extreme conditions like extreme pressure, harsh chemical environment, low and high temperatures and all speeds. Molykote greases are based on mineral oils or synthetic fluids including silicone oils. A number of Molykote greases contain special additives and/or solid lubricants like Molybdenium disulfide to provide effective lubrication
|
|
In any places where machines are running, lubricants are required.
The development of production technology has been leading to more and more complex and effective plants demanding the use of high-performance lubricants for guaranteeing a safe and continuous production. However, modern high-tech production facilities need more than a standard lubricant.
Setral high-performance lubricants lead to higher outputs and additionally ensure an enormous economic efficiency.
In practice this means:
* drastically reduced friction
* thus less wear
* extended lubrication intervals
* an extremely increased lifetime of plants and machineries
* thereby also bringing about environmental protection.
|
|
|
|
|
|
Magnalube®-G deposits a fine protective and lubricating film on metal parts. It is virtually unaffected by corrosive moisture and will not migrate from hot surfaces. Magnalube®-G is water resistant, stable at high temperatures, resists oil separation, and is chemically and mechanically stable.
The unique properties of Magnalube-G make it the grease that lubrication engineers trust in sensitive applications.
Magnalube-G has a variety of applications and is truly designed for use in any situation. The high quality of Magnalube-G is never wasted on an application that may typically require lower-grade grease. The energy savings and machine part protection that arise in sensitive applications are not lost in other applications. Here is a list of a few of the many applications that Magnalube is specially designed for:
Gears, Bearings & Jack Screws
Actuators
Brake Calipers
Computer Components
Construction Equipment
Railroad Couplings
Die-casting Machines
Electric Motors
Electric Switches
Gaskets
Hydraulic Equipment
Laser Equipment
Medical Devices
Mold Release
Office Business Machines
Pneumatic Cylinders
Pumps
Railroad Engines
Seals, Valves & Gaskets
Tools
Trucks & Trailers
Valves
|
|
Poor lubrication is one of the leading causes of bearing damage. Building on extensive tribological bearing design and manufacturing knowledge, Timken has developed a proprietary line of industrial lubricants that help keep bearings and related components operating efficiently in a variety of environments. High-temperature, anti-wear and water-resistant additives offer additional protection in challenging conditions.
Timken offers G-Power and M-Power single-point lubricators. These gas and motorized units lubricate bearings, chains, guideways and other equipment, helping to improve productivity and reduce maintenance costs.
|
|
|
Molykote® chain lubricants help prevent wear and process interruptions in power transmission systems and components. Compared to conventional oils they also offer greater resistance to oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils maximize fill intervals and maintain viscosity characteristics at wide temperature ranges.
|
|
Synthetic oil with modern EP-additives and anti-oxidants for high temperatures. APPLICATION: Chain lubrication up to 250 °C. Branches: Chemical industry, foundries, breweries, in wood, textile, automobile, chip-board, rubber, glass, insulating material and metal processing industries. Machines: Drying and shrinking ovens, paint shops, coating and conveyor systems, stenter frames and double belt presses.
Advantages:
* Excellent wear protection with low friction rates
* Adherent additives avoid drop-off and spin-off
* Outstanding creeping and penetrating properties
* Chemical stable and ageing resistant
* No lacquers; evaporates at high temperatures with nearly no residues
* Excellent corrosion protection
|
|
Adhesive Chain Lubricant
Ref: ACL400
Highly tenacious
Excellent resistance to water and high temperatures
Good mechanical stability
Good penetration at low temperatures
|
|
|
|
|
|
Champion Lubricants
RotorLub 8000
* Superior protection synthetic lubricant
* Increased machine operating efficiencies
* Formulated for excellent condensate oil/water separation
RotorLub 8000 is a superior PAO (polyalphaolefin)/MFSE (multi-functional synthetic ester) blend formulated with proven additive components. The result is superior thermal and oxidative stability.
RotorLub 8000 is ideal for application which require extended operating intervals. It is formulated for demulsibility and optimum viscosity over the compressors entire operating temperature range.
RotorLub 4000FG
* Food grade extended life lubricant
* Minimizes maintenance and downtime
* Improved lubrication at high and low temperatures
RotorLub 4000FG food grade is a PAO (polyaphaolefin) blend, authorized by the USDA as an H-1 approved lubricant for use in federally inspected meat and poultry plants. It complies with FDA 21CFR 178.3570 lubricants for incidental food contact.
RotorLub 4000 food grade is an extended life lubricant formulated to reduce maintenance intervals and extend compressor life.
|
|
|
|
|
|
* Extends switch life
* Improves signal quality
* Reduces operating temperature
* Controls switch ‘feel'
* Prevents contamination
* Silicone free
Contact lubricants increase the reliability and lifetime of all current carrying metal interfaces. These include switches, connectors and busbars.
Electrolube have been the leading supplier of contact lubricants since their invention by the founder in the 1950's.
A wide range of products are available covering all common applications, whilst a program of continual development provides speciality products for ever changing customer needs.
Manufactured as tenacious greases and oils, products are available for consistent operation at extremes of temperature and with sensitive plastics that are normally attacked by traditional lubricants.
The use of a suitable contact lubricant will solve the problems of wear, poor signal quality, inconsistent operation and allow the use of less expensive materials. The choice of lubricant can also allow the ‘feel' characteristics of the switch to be optimised.
|
|
Ultra Slick lubricant is a GC/LB grease designed for wheel bearing and general chassis lubrication. Product can be applied directly as a grease or sprayed on using an aerosol formulation. This high quality product can be used on any moving parts to provide better, longer lasting lubrication that withstands higher temperatures and
is safe on more surfaces. It withstands temperatures from -45°F to 350°F (-42°C to 177°C), 450°F (232°C) intermittent.
Aerosol - Level 3*
|
|
Accu-Lube offers a complete line of natural-based lubricants along withspecially-developed, patented micro-lubrication systems. The Accu-Lube System offers an innovative lubrication system that can be used on all major workshop processes, such as: Circular & Band Sawing, Turning, Milling, Drilling, Tapping, Reaming and Forming.
Accu-Lube represents the very latest technology ensuring:
- Improved productivity
- Reduced operating costs
- Safer working conditions
- Cleaner machine operations
- No waste disposal
- Eliminates cutting fluid
- Environmentally considerate
|
|
Magnalube-GX is an altered version of the original Magnalube-G formula that contains molybdenum disulfide {MoS2}. The proprietary blend of Magnalube-G and molybdenum disulfide results in a grease with unique qualities.
Magnalube-GX should be considered especially when you are working in extreme-pressure environments. Customers have also found that Magnalube-GX can dampen sound in loud industrial applications.
If you would like more information on the benefits of using Magnalube-GX for your application, please contact our Magnalube-GX staff at gxteam@magnalube.com.
|
|
The unique properties of Magnalube-G make it the grease that lubrication engineers trust in sensitive applications.
Magnalube-G has a variety of applications and is truly designed for use in any situation. The high quality of Magnalube-G is never wasted on an application that may typically require lower-grade grease. The energy savings and machine part protection that arise in sensitive applications are not lost in other applications. Here is a list of a few of the many applications that Magnalube is specially designed for:
Gears, Bearings & Jack Screws
Actuators
Brake Calipers
Computer Components
Construction Equipment
Railroad Couplings
Die-casting Machines
Electric Motors
Electric Switches
Gaskets
Hydraulic Equipment
Laser Equipment
Medical Devices
Mold Release
Office Business Machines
Pneumatic Cylinders
Pumps
Railroad Engines
Seals, Valves & Gaskets
Tools
Trucks & Trailers
Valves
|
|
No matter what your industry - Food and Beverage, Chemical, Industrial Assembly - we have the exact products and services to support your business. A lubricating grease is a semi-solid product of the dispersion of a thickening agent in a liquid lubricant. The lubricating grease operates by releasing the lubricating fluid from the thickening agent and provides a way to supply a lubricant where the useof oil is not practical.
Molykote® high performance greases are designed and tailored for use under extreme conditions like extreme pressure, harsh chemical environment, low and high temperatures and all speeds. Molykote greases are based on mineral oils or synthetic fluids including silicone oils. A number of Molykote greases contain special additives and/or solid lubricants like Molybdenium disulfide to provide effective lubrication
|
|
Magnalube®-G deposits a fine protective and lubricating film on metal parts. It is virtually unaffected by corrosive moisture and will not migrate from hot surfaces. Magnalube®-G is water resistant, stable at high temperatures, resists oil separation, and is chemically and mechanically stable.
The PTFE base effectively lubricates at temperatures +600° F to -50° F. The applications are unlimited. Magnalube is the multipurpose specialty lubricant that industrial engineers can trust.
|
|
Specified grease
The CG2 grease is low-dust-generation grease having more excellent lubrication performance and anti-corrosion capacity than conventional vacuum grease and also available in a wide temperature range of -40C to 200C.
|
|
Fully synthetic, solid free special grease for long-term lubrication of ejector pins, slides, folding units, latch locking units as well as all sliding surfaces in plastic injection moulding tools up to + 300°C as well as aggressive atmosphere.
Advantages:
* NSF H1 Reg.
* Resistant against aggressive plastics condensate
* Stays in place, no transportation of the grease on to the injection-moulded parts
* Packing of the injection-moulded parts without extra cleaning
* High output (shot) numbers without re-lubrication
* Neutral behaviour against common elastomers and plastics
* Outgassing substances do not provoke stress cracking corrosion (DIN 53449)
* Temperature range: - 30°C to + 300°C
|
|
|
|
|
|
The PTFE base effectively lubricates at temperatures +600° F to -50° F. The applications are unlimited. Magnalube is the multipurpose specialty lubricant that industrial engineers can trust.
In any High-Temperature/Low Temperature, High-Pressure or Extreme Pressure Magnalube-G will continue to lubricate by maintaining the protective barrier between surfaces.
Test Results
In high speed DMS at 250° F and 350° F Magnalube-G performed better than any other petroleum oil or grease lubricant. Here's a summary of exhaustive test results similiar to test data set done in Mil-G-23549 by the Dept. of Defense.
Description Method Requirement Results
Dropping Point ASTM D-566 450 Min. 458
Evaporation, 22 hrs. @ 350 ASTM D-972 7.0% 2.9%
Mean Hz Load Weld Point FTM-6503 50.0 Min. 60.5
Oil Separation, 24hrs @212 FTM-321 6.0% Max. 1.5%
Penetration, Cone (Worked) ASTM D-217 270-315 287
Penetration, Cone (Unworked) ASTM D-217 ---- 284
Penetration, Cone (Work-Stability-100,000 Strokes) GTM-313 ---- 305
Rust Preventative Properties ASTM D-1743 ---- Excellent
Water Washout Characteristics ASTM D-1264 ---- 0.86%
Wear Properties (Falex) ASTM D-2670 ---- Excellent at 1450 lb. Load
Wear, Gear FTM-335 ---- 5 lb Load-1.4 mg Wear/ 1000 Cycle 10 lb Load-3.2 mg Wear/1000 Cycle
|
|
Magnalube®-G deposits a fine protective and lubricating film on metal parts. It is virtually unaffected by corrosive moisture and will not migrate from hot surfaces. Magnalube®-G is water resistant, stable at high temperatures, resists oil separation, and is chemically and mechanically stable.
The PTFE base effectively lubricates at temperatures +600° F to -50° F. The applications are unlimited. Magnalube is the multipurpose specialty lubricant that industrial engineers can trust.
|
|
Magnalube-G has a variety of applications and is truly designed for use in any situation. The high quality of Magnalube-G is never wasted on an application that may typically require lower-grade grease. The energy savings and machine part protection that arise in sensitive applications are not lost in other applications. Here is a list of a few of the many applications that Magnalube is specially designed for:
Gears, Bearings & Jack Screws
Actuators
Brake Calipers
Computer Components
Construction Equipment
Railroad Couplings
Die-casting Machines
Electric Motors
Electric Switches
Gaskets
Hydraulic Equipment
Laser Equipment
Medical Devices
Mold Release
Office Business Machines
Pneumatic Cylinders
Pumps
Railroad Engines
Seals, Valves & Gaskets
Tools
Trucks & Trailers
Valves
|
|
Magnalube®-G deposits a fine protective and lubricating film on metal parts. It is virtually unaffected by corrosive moisture and will not migrate from hot surfaces. Magnalube®-G is water resistant, stable at high temperatures, resists oil separation, and is chemically and mechanically stable.
The PTFE base effectively lubricates at temperatures +600° F to -50° F. The applications are unlimited. Magnalube is the multipurpose specialty lubricant that industrial engineers can trust.
|
|
Magnalube-G has a variety of applications and is truly designed for use in any situation. The high quality of Magnalube-G is never wasted on an application that may typically require lower-grade grease. The energy savings and machine part protection that arise in sensitive applications are not lost in other applications. Here is a list of a few of the many applications that Magnalube is specially designed for:
Gears, Bearings & Jack Screws
Actuators
Brake Calipers
Computer Components
Construction Equipment
Railroad Couplings
Die-casting Machines
Electric Motors
Electric Switches
Gaskets
Hydraulic Equipment
Laser Equipment
Medical Devices
Mold Release
Office Business Machines
Pneumatic Cylinders
Pumps
Railroad Engines
Seals, Valves & Gaskets
Tools
Trucks & Trailers
Valves
|
|
|
Water-mixable cooling lubricants of oelheld are developed for almost all ranges of application. AquaTec is characterized through humanly Technology, is called the products has special value for humans, nature and machine.
|
|
|
|
